Sensitivity of direct metal laser sintering Maraging steel fatigue strength to build orientation and allowance for machining

This work deals with the effect of build orientation and of allowance for machining on DMLS‐produced Maraging Steel MS1. The experimental results, arranged by tools of Design of Experiment, have been statistically processed and compared. The outcomes were that, probably due to effect of the thermal treatment, machining, and material properties, the aforementioned factors do not have a significant impact on the fatigue response. This made it possible to work out a global curve that accounts for all the results, consisting in a high amount of data points. This can be regarded as one of the most complete and reliable fatigue models in the current literature. Fractographic and micrographic studies have been performed as well, to individuate the crack initiation points, usually located at subsurface porosities, and to investigate the location of internal inclusions and the actual martensitic microstructure along the stacking direction and on the build plane.     

Raman spectra of high‐density,low‐density,and linear low‐density polyethylene pellets and prediction of their physical properties by multivariate data analysis

Raman spectra have been measured for pellets of five samples of high‐density polyethylene (HDPE), seven samples of low‐density polyethylene (LDPE), and six samples of linear low‐density polyethylene (LLDPE). The obtained Raman spectra have been compared to find out characteristic Raman bands of HDPE, LDPE, and LLDPE. Principal component analysis (PCA) was applied to the Raman spectra in the 1600–650 cm^?1 region after multiplicative scatter correction (MSC) to discriminate the Raman spectra of the three different PE species. They are classified into three groups by a score plot of PCA factor 1 vs. 2. HDPE with high density and high crystallinity gives high scores on the factor 1 axis, while LDPE with low density and low crystallinity yields negative scores on the same axis. It seems that factor 1 reflects the density or crystallinity. A PC weight loadings plot for factor 1 shows six upward peaks corresponding to the bands arising from the crystalline parts or all‐trans ? (CH₂)_n? groups and seven downward peaks ascribed to the bands of the amorphous or anisotropic regions and those arising from the short branches. Partial least‐squares (PLS‐1) regression was applied to the Raman spectra after MSC to propose calibration models that predict the density, crystallinity, and melting points of the polyethylenes. The correlation coefficient was calculated to be 0.9941, 0.9800, and 0.9709 for the density, crystallinity, and melting point, respectively, and their root‐mean‐square error of cross validation (RMSECV) was found to be 0.0015, 3.3707, and 2.3745, respectively. The loadings plot of factor 2 for the prediction of melting point is largely different from those for the prediction of density and crystallinity. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 443–448, 2002     

Thermodynamic modeling of vapor-liquid equilibria and excess properties of the binary systems containing diethers and n-alkanes by cubic equation of state

A comparison of the performances of two different approaches of cubic equations of state models, based on a classical van der Waals and mixing rules incorporating theG ^E equation, was carried out for correlation of Vapor-Liquid Equilibria (VLE), H^E and C _P ^E data alone, and simultaneous correlation of VLE+H^E, VLE+C _P ^E , H^E +C _P ^E and VLE+H^E +C _P ^E data for the diethers (1,4-dioxane or 1,3-dioxolane) with n-alkane systems. For all calculations the Peng-Robinson-Stryjek-Vera cubic equation of state (PRSV CEOS) was used. A family of mixing rules for the PRSV CEOS based on the Modified van der Waals one-fluid mixing rule (MvdW1) and two well-known CEOS/G^E mixing rules (MHV1 and MHV2), was considered. The NRTL equation, as the G^E model with linear or reciprocal temperature dependent parameters, was incorporated in the CEOS/G^E models. The results obtained by the CEOS/G^E models exhibit significant improvement in comparison to the MvdW1 models.     

An Example of Human-Centric Sensor Network: Be Responsible Platform

The paper addresses the Be Responsible platform, a representative example of human-centric sensing network which, relying on the Info-Communication and Internet of Things concepts, aims to improve the communication between citizens, on one side, and government authorities, on the other side, with the purpose of resolving various problems encountered in a modern society. A widespread network of human-centric smartphone devices and PCs has been used as a valuable source of data collected and processed in order to trigger adequate actions upon problem resolving. In this way, humans acting as sensor operators and data sources become a powerful factor in improving their society. The Be Responsible platform enables the people to report the irregularities in various aspects of their social life (grey economy, misuse of government vehicles, ecology, traffic), and hence to take active part in resolving them. It also promotes positive and responsible social and institutional behavior, which has to be nurtured in any society seeking progress. The number of submitted reports as well as the money collected from the fine revenues and subsequently invested in projects of social good, undoubtedly prove that what could not be achieved through years of traditional government-led policy approach, was achieved in months of citizen engagement.     

Microstructural and Tribological Properties of A356 Al–Si Alloy Reinforced with Al<Subscript>2</Subscript>O<Subscript>3</Subscript> Particles

In the present study, the effect of the Al₂O₃ particles (average size of 12 μm, 3 and 10 wt.%) reinforcement on the microstructure and tribological properties of Al–Si alloy (A356) was investigated. Composites were produced by applying compocasting process. Tribological properties of unreinforced alloy and composites were studied, using pin-on-disc tribometer, under dry sliding conditions at different specific loads and sliding speed of 1 m/s. Microhardness measurements, optical microscope and scanning electron microscope were used for microstructural characterization and investigation of worn surfaces and wear debris. During compocasting of A356 alloy, a transformation from a typical dendritic primary α phase to a non-dendritic rosette-like structure occurred. Composites exhibited better wear resistance compared with unreinforced alloy. Presence of 3 wt.% Al₂O₃ particles in the composite material affected the wear resistance only at specific loads up to 1 MPa. The wear rate of composite with 10 wt.% Al₂O₃ particles was nearly two order of the magnitude lower than the wear rate of the matrix alloy. Dominant wear mechanism for all materials was adhesion, with others mechanisms: oxidation, abrasion and delamination as minor ones.     

A modified dual current mode control method with an adaptive current bandwidth

In this paper, a new adaptive dual current mode control method (ADCMC) is presented, being a result of the modification of existing dual current mode control (DCMC) by introducing an adaptive current bandwidth. The ADCMC offers several important advantages over DCMC, such as no peak‐to‐average error in the inductor current, better transient response of current loop, and improved line regulation. A detailed analysis of the proposed ADCMC is performed for three types of DC–DC power electronics converters: buck, boost, and non‐inverting buck–boost converter. The performances of the ADCMC are tested with simulations and experiments. The obtained results confirm the analysis and validity of the proposed ADCMC method. Copyright © 2015 John Wiley & Sons, Ltd.     

“Quinone Millipedes” Reconsidered: Evidence for a Mosaic-Like Taxonomic Distribution of Phenol-Based Secretions across the Julidae

The defensive chemistry of juliformian millipedes is characterized mainly by benzoquinones (”quinone millipedes”), whereas the secretions of the putative close outgroup Callipodida are considered to be exclusively phenolic. We conducted a chemical screening of julid secretions for phenolic content. Most species from tribes Cylindroiulini (15 species examined), Brachyiulini (5 species examined), Leptoiulini (15 species examined), Uncigerini (2 species examined), Pachyiulini (3 species examined), and Ommatoiulini (2 species examined) had non-phenolic, in most cases exclusively benzoquinonic secretions. In contrast, tribes Cylindroiulini, Brachyiulini, and Leptoiulini also contained representatives with predominantly phenol-based exudates. In detail, p-cresol was a major compound in the secretions of the cylindroiulines Styrioiulus pelidnus and S. styricus (p-cresol content 93 %) and an undetermined Cylindroiulus species (p-cresol content 51 %), in the brachyiulines Brachyiulus lusitanus (p-cresol content 21 %) and Megaphyllum fagorum (p-cresol content 92 %), as well as in an undescribed Typhloiulus species (p-cresol content 32 %, Leptoiulini). In all species, p-cresol was accompanied by small amounts of phenol. The secretion of M. fagorum was exclusively phenolic, whereas phenols were accompanied by benzoquinones in all other species. This is the first incidence of clearly phenol-dominated secretions in the Julidae. We hypothesize a shared biosynthetic route to phenols and benzoquinones, with benzoquinones being produced from phenolic precursors. The patchy taxonomic distribution of phenols documented herein supports multiple independent regression events in a common pathway of benzoquinone synthesis rather than multiple independent incidences of phenol biosynthesis.     

Optimization of bioprocess for production of copper-enriched biomass of industrially important microorganism Saccharomyces cerevisiae

The production of Saccharomyces cerevisiae cells enriched with copper and the effects of adding copper ions to different media on yeast cell growth and ethanol production were studied. In the media Cu(2+) concentrations of up to 0.094 mM had no effect on alcoholic fermentation, whereas higher Cu(2+) concentrations markedly decreased yeast cell growth rate and ethanol production. Under static conditions, the maximum amounts of copper uptake (i.e., 1.16 mg/g, 1.2 mg/g and 0.81 mg/g dry matter yeast biomass for glucose, sucrose and molasses media, respectively) were obtained after 8 h of fermentation, whereas under dynamic conditions smaller amounts of copper uptake (i.e., 0.98 mg/g, 1.02 mg/g and 0.7 mg/g dry matter yeast biomass for glucose, sucrose and molasses media, respectively) were obtained after 6 h of fermentation.     

Defining a strategy for chemical imaging of industrial pharmaceutical samples on Raman line-mapping and global illumination instruments

The performance of line-mapping and global illumination Raman systems for two pharmaceutical tablets and a powder blend are assessed in this study. The chemical images were obtained from the placebo, real tablets, and powder blend by using x20, x50, and x100 objectives, as well as via the (pseudo) confocal set-up. The chemical images were produced via univariate wavenumbers and as re-folded principal component (PC) scores (known as score images). In most cases it was easy to image two or three major components of the tablets directly, while the minor components were only imaged via PC scores. The active pharmaceutical ingredients (APIs) were located relatively easily even if present in quite low concentrations (less than 1%) owing to the high Raman scattering coefficients of these materials. The strength of the Raman signal of the API makes it almost ubiquitous in the chemical images of real tablets. Thorough discussion is given on the strategies used to produce chemical images, the prospects of making composite images of all components present in the tablets, and the effects of packing density with relation to the diffusion of the excitation laser light inside the sample. The strengths and weaknesses of the Raman imaging techniques used are emphasized and suggestions are given regarding which instrument is preferable with respect to the goal of the experiment and material under study. For example, mapping technology is preferred for analyzing minor components, while the global illumination approach is recommended for imaging of spatially isolated strong Raman scatterers.     

Estimation of sedimentation rate in the Middle and South Adriatic Sea using 137Cs

(137)Cs activity concentrations were studied in the sediment profiles collected at five locations in the Middle and South Adriatic. In the sediment profiles collected from the South Adriatic Pit, the deepest part of the Adriatic Sea, two (137)Cs peaks were identified. The peak in the deeper layer was attributed to the period of intensive atmospheric nuclear weapon tests (early 1960s), and the other to the Chernobyl nuclear accident (1986). Those peaks could be used to estimate sedimentation rates by relating them to the respective time periods. Grain-size analysis showed no changes in vertical distribution through the depth of the sediment profile, and these results indicate uniform sedimentation, as is expected in deeper marine environments. It was not possible to identify respective peaks on more shallow locations due to disturbance of the seabed either by trawlers (locations Palagru?a and Jabuka) or by river sediment (location Albania). The highest sedimentation rates were found in Albania (～4 mm y(-1)) and Jabuka (3.1 mm y(-1)). For Palagru?a, the sedimentation rate was estimated to be 1.8 mm y(-1), similar to the South Adriatic Pit where the sedimentation rate was estimated to be 1.8±0.5 mm y(-1). Low sedimentation rates found for the Middle and South Adriatic Sea are consistent with previously reported results for the rest of the Mediterranean.