Optimization of LED‐based light blendings for object presentation

This study looks at the perceived quality of light‐emitting diode (LED)‐based lighting of various colors. The objective was to find out whether LEDs could provide better (i.e., more relevant and acceptable) lighting than that which is obtained with standard halogen or fluorescent sources. The perception of objects was assessed under different lighting schemes. Subjects were invited to add red, cyan and/or amber to white LED‐based light to match the halogen and fluorescence rendering on specific targets: a color chart and a painting. They were also asked to rate the difference between the two, and to express their preference. The results obtained for the perception of LED‐based lighting were quite positive. Color blendings of LED light were found to provide illuminated situations similar to halogens or fluorescent sources. These blendings were well accepted, and indeed often preferred, although the color rendering index (CRI) was always low. This indicates that the CRI as it stands is inadequate to characterize the color rendering of solid‐state light sources, and needs to be updated. LED‐based lighting systems seem to have considerable potential for use in shops and display units, where they may well outperform existing lighting systems. © 2009 Wiley Periodicals, Inc. Col Res Appl, 34, 310–320, 2009     

拉拉君堡的采收之旅

9月我从上海出发,坐了十多个小时的飞机经巴黎辗转到达波尔多,从机场驱车沿着齐隆河（Gironde）左岸北上高梅多克（Haut Medoc）,20分钟后司机提醒我到达了这条公路上的第一家列级酒店。     

Fabrication and evaluation of solid-oxide fuel cell anodes employing reaction-sintered yttria-stabilized zirconia

This paper reports on the fabrication and performance of solid-oxide fuel cell (SOFC) anodes utilizing yttria reaction-sintered zirconia (YRSZ). Through the reaction-sintering process, the technical-grade YSZ commonly used in the Ni-YSZ anode cermet is replaced with lower-cost ZrO₂ and Y₂O₃ materials. When sintered in the presence of nickel oxide, ZrO₂ and Y₂O₃ form cubic-phase YSZ at temperatures characteristic of SOFC processing (1400-1550 °C). Reaction sintering enables the formation of YSZ during cell fabrication, reducing SOFC anode raw-materials cost and the number of SOFC-fabrication processes. This paper reports the results of a broad range of characterization and performance measurements to evaluate the YRSZ material, including (1) crystal structure, (2) morphology, (3) pore-size distribution, (4) electronic resistivity, (5) fracture strength, (6) gas transport and catalytic activity, and (7) electrochemical performance. Material properties and performance are found to be comparable to or better than equivalent materials fabricated by conventional processes.     

Thermal inactivation kinetics of alkaline phosphatase in equine milk

Alkaline phosphatase (ALP) is widely used as an indicator of proper pasteurization in bovine milk. Due to interest in the use of equine ALP as a time/temperature integrator (TTI) for evaluation of the efficacy of thermal processing of equine milk, its inactivation kinetics were evaluated in whole and skimmed equine milk. Experimentally determined decimal reduction times showed that equine ALP is more readily inactivated in equine milk than its bovine counterpart. Thus, considering the required 6 D reduction of pathogens and the rather low enzyme level present in equine milk, equine ALP will not be suitable as indicator for correct pasteurization of equine milk under the conditions currently used in the reference method for the determination of ALP in milk-based products.     

Aspects of stadium design for warm climates

The airflow pattern on the spectators' terrace in stadia is affected by numerous architectural factors, such as form, size, permeability, i.e. the morphology of the building. A stadium design not taking into account the prevailing environmental parameters can result in unpleasant thermal and aerodynamic environment in the stadium bowl.     

Influence of hysteresis on the transient hygrothermal response of a hemp concrete wall

Building envelopes with bio-materials like hemp concrete are currently undergoing an increasing development due to their low environmental impact and their interesting hygrothermal properties. This kind of hygroscopic material is characterized by a hysteretic behaviour. In this paper, the influence of such behaviour on the hygrothermal response of a building wall is discussed. An experimental facility is designed to measure temperature and relative humidity within a hemp concrete wall submitted to climatic variations. This facility provides a set of experimental data suited for benchmarking. Numerical simulations are performed with a hysteresis model implemented in a heat and moisture transfer model. Comparisons between numerical and experimental results show that hysteresis modelling is relevant to simulate the hygrothermal response of the wall. The discussion is extended to the influence of the initial moisture content.     

Predicting suspended sediment concentration from nephelometric turbidity in organic‐rich waters

Nephelometric turbidity is an optical index for the side scattering of light caused by fine particles suspended in water. When a mixed composition of suspended inorganic and organic materials, including dissolved organic material, is present, turbidity measurements can be affected by the different optical properties of the organic and inorganic materials present, and different turbidimeters are more or less sensitive to these influences. Two different methods of nephelometric turbidity measurement were assessed (using instruments confirming to two different turbidity standard methods: EPA 180.1 and ISO 7027). We investigated the influence of particulate organic matter and coloured dissolved organic matter on relationships between turbidity and suspended sediment concentration for rivers in diverse Otago catchments, in the South Island of New Zealand. The presence of organic matter and dissolved colour affected turbidity measurement owing to light absorption; however, turbidity measurement following the ISO 7027 standard, which specifies near infrared radiation at wavelengths where organic absorption is very weak, was less affected by organics. As a result, rating equations between suspended sediment and turbidity may be significantly different with ISO 7027 compared with EPA 180.1 methods.     

Postural changes in plasma renin activity and responses to vasoactive drugs in a case of Shy-Drager syndrome

A male aged 47 years with gross autonomic insufficiency as part of the Shy-Drager syndrome is described. He did not sweat normally when warmed, and his circulatory responses to mental arithmetic, the Valsalva manoeuvre, and head-up tilt were abnormal indicating severe sympathetic failure. During head-up tilt there was a rise in plasma renin activity and plasma aldosterone. It is argued that plasma renin activity is not dependent on sympathetic nervous activity and may be mediated by renal baroreceptors. These rises may help sustain the blood pressure in such patients during repeated head-up tilts. Infusions of L-noradrenaline and angiotension produced greater hypertension, and injections of isoprenaline greater hypotension than in controls. Although it is difficult to exclude the possibility that one factor in this may be hypersensitivity of receptors in blood vessel walls, the principal factor is likely to be the absence of those baroreflexes of which the efferent pathways are in the sympathetic nervous system.     

First confirmation in red wine of products resulting from direct anthocyanin–tannin reactions

Analysis of wine fractions before and after thiolysis confirmed the occurrence in red wine of direct reactions between anthocyanins and tannins established earlier in model solutions. Results showed the presence of two types of structures differing in the linkage position of the anthocyanin moiety. On one hand, detection of malvidin‐3‐glucoside (Mv3g) among thiolysis products revealed the presence of anthocyanin‐derived pigments in which Mv3g is linked by its C‐6 or C‐8 top. On the other hand, LC/MS analysis allowed the detection of two derivatives tentatively identified as flavenes or a bicyclic condensation products yielded by the reaction of a flavanol monomer (C‐6 or C‐8 top) with malvidin‐3‐glucoside (C‐4 position). The presence of the corresponding benzylthioethers after thiolysis of the polymeric fractions confirmed that procyanidins are similarly involved in the latter reaction. Besides, MS also allowed the detection of new benzylthioethers of catechin derivatives released after thiolysis of the wine fractions, indicating that in addition to the postulated processes other types of reactions take place in wines. © 2000 Society of Chemical Industry