Analysis of an electricity-cooling cogeneration system for waste heat recovery of gaseous fuel engines

Waste heat recovery(WHR)is one of the most useful ways to improve the efficiency of internal combustion engines,and an electricity-cooling cogeneration system(ECCS)based on Rankin-absorption refrigeration combined cycle for the WHR of gaseous fuel engines is proposed in the paper.This system can avoid wasting the heat in condenser so that the efficiency of the whole WHR system improves,but the condensing temperature of Rankin cycle(RC)must increase in order to use absorption refrigeration system,which leads to the decrease of RC output power.Therefore,the relationship between the profit of absorption refrigeration system and the loss of RC in this combined system is the mainly studied content in the paper.Because the energy quality of cooling and electricity are different,cooling power in absorption refrigeration is converted to corresponding electrical power consumed by electric cooling system,which is defined as equivalent electrical power.With this method,the effects of some important operation parameters on the performance of the ECCS are researched,and the equivalent efficiency,exergy efficiency and primary energy rate are compared in the paper.     

热力管线中不锈钢波纹管破裂原因分析

采用金相显微镜和扫描电镜分析了热力管线中不锈钢 波纹管破裂原因.该波纹管破裂特征与一般环向开裂不同，裂纹沿轴向扩展.分析认为，破裂 属穿晶应力腐蚀.引起应力腐蚀的介质是土壤中的氯化物，而应力则来自环向工作应力和冷 加工残余应力，而环向工作应力起主导作用。     

弛豫铁电体Pb(Mg1/3Nb2/3)O3-PbTiO3的相变

测量了(1-x％)镁铌酸铅-x％钛酸铅(1≤X≤11)(简称PMNTx)陶瓷样品的介电常数、内耗和Young’s模量．观测到在Tm温度附近，即在介电常数达到最大值时，出现一个内耗峰，并且模量发生软化．这反映了极化纳米微畴的弛豫．对于PMNTx(5≤x≤11)的样品，在Tm温度以下的某个温度出现附加的内耗峰和Young’s模量的异常，表明样品中发生了自发的弛豫铁电到铁电(简称R-F)的相变，对R-F相变的机制进行了讨论．     

Microstructure and strength of brazed joints of TiB2 cermet to TiAl-based alloys

In this study, TiB2 cermet and TiAl-based alloy are vacuum brazed successfully by using Ag-Cu-Ti filler metal.The microstructural analyses indicate that two reaction products, Ti ( Cu, Al ) 2 and Ag bused solid solution ( Ag ( s. s ) ) , are present in the brazing seam, and the iuterface structure of the brazed joint is TiB2/TiB2 Ag ( s. s ) /Ag ( s. s ) Ti ( Cu,Al)2/Ti( Cu, Al)2/TiAl. The experimental results show that the shear strength of the brazed TiB2/TiAl joints decreases us thebrazing time increases at a definite brazing temperature. When the joint is brazed at 1 223 K for 5 min, a joint strength up to 173 MPa is achieved.     

Ti和V对Fe中氢与位错交互作用的影响

研究了Fe-0.5wt-%Ti和Fe-0.5wt-%V合金中由氢与位错交互作用所形成的氢致冷加工内耗峰(H-CWP)。实验结果表明:合金元素对H-CWP、对氢与位错之间的交互作用有显著的影响,与氢作用愈强的元素,对H-CWP的影响愈大,内耗实验结果与力学性能之间存在着一定的联系.     

低锡青铜镀层电解退除工艺

介绍低锡青铜镀层电解退除工艺及应用情况,并对影响因素和退镀机理进行探讨。工艺成分简单,溶液稳定,使用寿命长,底层不易腐蚀,退镀溶液可直接加入镀液使用。     

"THERMO": COMPUTER PROGRAM FOR SIMULATION OF SURFACE PULSE HEATING

1.IntroductionTheoneofthemostimportantparametersofthethermalcycleduringsurfacepulseheatingistherateofheatingandcooling.Knowledgeofthesevaluesinparticulartemperatureintervalshelpstoprognosticatephasestructureintheheataffectedzones(HAZ),toanalyzecausesofthestructuretransformations.Todaythereisavoluminousliteratureoncalculationofthethermalconditionsforasolidduringsurfaceprocessing.Butthetemperaturevariationsareusuallyexaminedasafunctionoftimeorspacecoordinates.Sometimesthefirstderivativeofthete…     

New development in welding thin-shell aluminum alloy structures with high strength

From the viewpoint of welding mechanics, two new welding methods-welding with trailing peening and welding with trailing impactive rolling were introduced. For aluminum alloy thin-shell structures with high strength, welding will lead to hot cracking, poor joint and distortion. In order to solve them, trailing impactive device was used behind welding torch to impact the different positions of welded joints, thus realizing the welding with free-hot cracking, low distortion and join tstrengthening. By use of impactive rolling wheels instead of peening heads, the outlook of welded specimen can be improved and stress concentration at weld toes can be reduced. Equipment of this technology is simple and portable. It can used to weld sheets, longitudinal and ring-like beams of tube-like structures, as well as the thin-shell structures with closed welds such as flanges and hatches. So the technology has the wide application foreground in the fields of aviation and aerospace.     

Ni-Cr-Al纳米晶合金在1000℃的高温氧化行为

研究了纳米晶Ni-Cr-Al合金的高温氧化行为，发现与 铸态合金不同，随成分不同纳米晶合金在1000℃氧化时，氧化物可分为四个区：A单一Al2O3区；B复杂氧化膜含一连续Al2O3内层区； C复杂氧化膜含内氧化物区；D Al2O3和NiAl2O4共生区.纳米晶化明显扩展了Al2O3生成区的成份范围.     

机械合金化Ag-30Cr合金在0.1 Mpa纯氧气中的氧化

采用机械合金化方法制备了Cr含量为30％(质量分数)的两相颗粒极细的Ag—Cr合金，在700℃，800℃及0．1MPa纯氧气中氧化时，机械合金化Ag-30Cr合金外层为Ag层，其下方为复合氧化物AgCrO2，最内层为连续的Cr2O3，这一结构不同于粗晶粒粉末冶金Ag—Cr合金的复杂的混合氧化膜。这主要是由于晶粒的细化加快了Cr颗粒的溶解，加速了Cr从合金到膜的扩散，从而有效地促进Cr2O3层的形成。