Neutronic characterization of the MEGAPIE target

The MEGAPIE project aimed to design, build and operate a liquid metal spallation neutron target of about 1 MW beam power in the SINQ facility at the Paul Scherrer Institut (Villigen, Switzerland). This project is an important step in the roadmap towards the demonstration of the accelerator driven system (ADS) concept and high power liquid metal targets in general. Following the design phase, an experimental program was defined to provide a complete characterization of the facility by performing a “mapping” of the neutron flux at different points, from the center of the target to the beam lines. The neutronic performance of the target was studied using different experimental techniques with the goals of validating the Monte Carlo codes used in the design of the target; additionally, the performance was compared with the solid lead targets used before and after the MEGAPIE experiment.     

Characterization of Gram‐Negative Psychrotrophic Bacteria isolated from Italian Bulk Tank Milk

Eighty psychrotrophic bacterial strains, isolated from different northwest Italian bulk tank milks destined for Grana Padano cheese production, were identified by 16S rRNA gene amplification and partial sequence analysis of the rpoB gene. Pseudomonas spp. were the most commonly occurring contaminants, P. fluorescens being the predominant isolated species, along with Enterobacteriaceae, primarily Serratia marcescens. RAPD‐PCR was used to study genetic variability and distinguish closely related strains; a high degree of genetic heterogeneity among the strains was highlighted. All the strains were characterized for their ability to produce proteases, lipases and lecithinases at different temperatures (7, 22, and 30 °C). Forty‐one of the psychrotrophic strains were positive for all the enzymatic activities. The highest number of positive strains for all the incubation temperatures was found for lipolytic activity (59), followed by proteolytic (31) and lecithinase (28) activities, and the enzymatic traits varied among the Pseudomonas and Enterobacteriaceae strains. The proteolytic psychrotrophic strains were screened for the presence of the aprX gene, coding for a heat‐resistant metalloprotease in Pseudomonas spp. The aprX gene was detected in 19 of 63 Pseudomonas strains, and was widespread in the P. fluorescens strains (14/19).     

Update on optimized purification and characterization of natural milk allergens

Highly purified allergens namely cow's milk alpha-lactalbumin (ALA). (Bos d 4), beta-lactoglobulin (BLG) (Bos d 5) and casein (Bos d 8) and goat's milk casein were prepared from the raw milk from a single animal with a known genetic background. Consequently the natural isoforms are limited, constant and characterized. Purification included selective precipitations and chromatographical steps. Characterization of structure and allergenic activity assessment of milk allergens were carried out using physicochemical and immunochemical methods. Taken together data demonstrated the absence of impurities and of contamination by other milk allergens in each preparation. NMR and circular dichroism analyses confirmed the native conformation and proper folding of ALA and BLG and the expected absence of folding of bovine and caprine casein. Enzyme immuno assays confirmed the native conformation of BLG and the purity and immunoreactivity of all the proteins. The allergenic activity, e. g. the IgE binding capacity, of purified proteins was identical as that of those proteins when present in milk. The purified proteins also demonstrated the ability to provoke the degranulation of humanized rat basophilic leukaemia cells. All the data thus confirm the purity, identity, structural conformation and functionality of the prepared milk allergens.     

External Shape Differences between Sympatric Populations of Commercial Clams <Emphasis Type="Italic">Tapes decussatus</Emphasis> and <Emphasis Type="Italic">T. philippinarum</Emphasis>

The actual Italian production of clams is chiefly sustained by the native Tapes decussatus and the fortuitously imported Tapes philippinarum. Both species are commercialized as “Vongola verace”, but the commercial value of T. philippinarum is lower. The discrimination of species by sight is usually difficult and it cannot be done by observation based on shell morphology but only when animals open their valves hence displaying the two siphons. In this study, we propose a new, noninvasive method to discriminate individuals of both species based on the analysis of the external shape of their shells. Accordingly, in sympatric populations at two sites of the Po river outlet, we have chosen individuals (63 for T. decussatus and 57 for T. philippinarum) of comparable commercial size for which a certain genetic discrimination was previously done. Pictures of the left side valve were taken for all specimens. Their profiles were analyzed with the elliptic Fourier analysis. The mean outline for each species was graphically extracted. The coefficients of the harmonic equations were analyzed by multivariate classification (partial least squares discriminant analysis [PLSDA]). Results showed a high percentage of correct classification of individuals of both species (96.6%). Contour analysis reflected the overall shell shape and thus identified morphological aspects that were difficult to recognize and quantify in sight. The high percentage of correct classifications obtained by combining the analysis of elliptic Fourier harmonics with PLSDA demonstrated the feasibility of this method to discriminate species with a high level of resemblance.     

A highly efficient receiver for satellite‐based automatic identification system signal detection

An innovative receiver architecture for the satellite‐based automatic identification system has been recently proposed. In this paper, we describe a few modifications that can be introduced on the algorithms for synchronization and detection, which provide an impressive performance improvement. The receiver architecture has been designed for an on‐board implementation, and a prototype has been implemented by the University of Parma and CGS S.p.A. Compagnia Generale per lo Spazio under the European Space Agency project FENICE (Flexible innovative AIS receiver prototype). A few modifications are also here described that could allow a further performance improvement in case of processing moved to ground‐based stations, based on a priori information there available. Copyright © 2014 John Wiley & Sons, Ltd.     

Optimal design of Service Overlay Networks with economic and performance constraints

In the last years, Service Overlay Networks (SONs) have emerged as a promising means to address some of the issues (e.g. end‐to‐end QoS) affecting the current Internet and to favor the development and deployment of new value‐added Internet services. The deployment of an SON is a capital‐intensive investment, since bandwidth with certain QoS guarantees must be purchased from the individual network domains through bilateral Service Level Agreements. Thus, minimizing the economic cost of the logical end‐to‐end service delivery infrastructure is one of the key objectives for the SON provider. When a SON is aimed at end‐to‐end QoS provisioning, its topology must be designed so as to also satisfy the specific requirements of QoS‐sensitive applications. This paper deals with the problem of planning the SON topology in order to take into account both cost and QoS constraints. More specifically, the paper proposes a set of new algorithms for the design of an optimized SON topology, which minimizes the economic cost while simultaneously meeting bandwidth and delay constraints. A performance comparison among such algorithms is finally carried out. Copyright © 2009 John Wiley & Sons, Ltd.     

A Comparison Between the Interpolated Bounce-Back Scheme and the Immersed Boundary Method to Treat Solid Boundary Conditions for Laminar Flows in the Lattice Boltzmann Framework

In this paper, the interpolated bounce-back scheme and the immersed boundary method are compared in order to handle solid boundary conditions in the lattice Boltzmann method. These two approaches are numerically investigated in two test cases: a rigid fixed cylinder invested by an incoming viscous fluid and an oscillating cylinder in a calm viscous fluid. Findings in terms of velocity profiles in several cross sections are shown. Differences and similarities between the two methods are discussed, by emphasizing pros and cons in terms of stability and computational effort of the numerical algorithm.     

Preferences for ancient and modern art museums: Visitor experiences and personality characteristics.

This research has two main purposes. The first is to replicate and possibly to extend the results obtained in a previous study, where the authors found that visitors to the ancient art museum conducted their visit with the primary aim of acquiring understanding and knowledge, while modern art museum visitors conducted their visit with an approach that was primarily emotional and pleasure-seeking. The second purpose relates to studies showing that people who prefer abstract art present higher levels on personality traits like “Openness to Experience” and “Sensation Seeking,” compared to people who prefer realistic art. This study investigates these two personality traits for people who favor visiting museums of ancient rather than modern art. Results confirmed previous findings that emotional aspects related to the visit were relevant for modern art museum visitors, while a more cognitive approach based on learning characterized ancient art museum visitors. Concerning personality traits, no difference was found between the two museum groups on the “Openness to Experience” dimension; differences were found on the “Sensation Seeking” trait; modern art museum visitors attained higher scores as compared to ancient art museum visitors. (PsycINFO Database Record (c) 2010 APA, all rights reserved)