Gas–Surface Interactions on Quasicrystals

To commemorate the awarding of the Nobel Prize for Chemistry to Daniel Shechtman for his discovery of quasicrystals, this paper reviews our recent studies of the interaction of rare gases and hydrocarbon gases with the tenfold surface of quasicrystalline decagonal Al-Co-Ni.     

Nanoindentation Characterization of Submicro- and Nano-Sized Liquid-Phase-Sintered SiC Ceramics

Submicro- and nano-sized liquid-phase-sintered SiC ceramics were mechanically tested by nanoindentation in the peak load range 5–400 mN. The submicro-sized sample showed a marked indentation size effect which the nano-sized samples did not exhibit. The relevance of indentation depth with respect to the microstructural scale has been outlined. In the investigated grain-size range, the hardness dependence on the grain size could be described by a load-dependent inverse Hall–Petch relation. Young's modulus was less microstructure- and load-dependent. Because of the very fine microstructure, the nano-sized SiC materials gave lower elastic values than the submicro-sized SiC ceramic.     

<Superscript>1</Superscript>H NMR characterization of milk lipids: A comparison between cow and buffalo milk

Characterization of the lipid fraction of raw cow and buffalo milk samples, collected in different breeding areas in Apulia, a region of southern Italy, were performed by means of ¹H NMR. The aim of this work was to establish whether FA composition data obtained by ¹H NMR can be used in the differentiation of buffalo and cow milk samples according to species. A complete assignment of the signals present in the spectrum was attempted by COSY, heteronuclear coherence spectra. Quantification of FA was carried out by inserting the integrals of particular peaks in suitable calculations. Multivariate statistical analysis, conducted on the results of the quantification, permitted buffalo and cow milks to be distinguished.     

The photoinduced charge transfer mechanism in aligned and unaligned carbon nanotubes

Using time-resolved reflectivity measurements on unaligned and aligned bundled single-wall carbon nanotubes with a pump energy of 1.55 eV, quasi-resonant with the second Van Hove singularity of semiconducting tubes, a positive sign of the transient reflectivity is detected in unaligned nanotubes. In contrast a negative sign is detected in aligned nanotubes. This discovery addresses a long-standing question showing that in unaligned nanotubes the stronger intertube interactions favor the formation of short-lived free charge carriers in semiconducting tubes. A detailed analysis of the transient reflectivity spectral response shows that the free carriers in the photo-excited state of semiconducting tubes move towards metallic tubes in about 400 fs.     

Degradation and stabilization of poly(3-hexylthiophene) thin films for photovoltaic applications

Polymer-based solar cells (PSC) represent a promising technology in the field of photovoltaics, although they still suffer from poor environmental stability. Poly(3-hexylthiophene) (P3HT) is one of the most commonly employed electron-donor materials for the preparation of the photo-active layer of PSC and it is known to undergo degradation when exposed to light. In this work, the degradation of P3HT was studied by irradiating polymer films by means of simulated sunlight. The results of this study highlighted a remarkable instability of P3HT. Substantial modifications of the infrared as well as of the UV–Vis spectra of the polymer were reported and a degradation pathway was suggested, in agreement with recent literature results. In order to stabilize the structure, two additives were evaluated namely a standard Hindered Amine Light Stabilizer (HALS) and Multi-Walled Carbon Nanotubes (MWCNT). The addition of MWCNT appeared to significantly reduce the rate of degradation.     

Water�CGas Shift and CO Methanation Reactions over Ni�CCeO2(111) Catalysts

X-ray and ultraviolet photoelectron spectroscopies were used to study the interaction of Ni atoms with CeO₂(111) surfaces. Upon adsorption on CeO₂(111) at 300 K, nickel remains in a metallic state. Heating to elevated temperatures (500?C800 K) leads to partial reduction of the ceria substrate with the formation of Ni²⁺ species that exists as NiO and/or Ce_1?xNi_xO_2?y. Interactions of nickel with the oxide substrate significantly reduce the density of occupied Ni 3d states near the Fermi level. The results of core-level photoemission and near-edge X-ray absorption fine structure point to weakly bound CO species on CeO₂(111) which are clearly distinguishable from the formation of chemisorbed carbonates. In the presence of Ni, a stronger interaction is observed with chemisorption of CO on the admetal. When the Ni is in contact with Ce⁺³ cations, CO dissociates on the surface at 300 K forming NiC_x compounds that may be involved in the formation of CH₄ at higher temperatures. At medium and large Ni coverages (>0.3 ML), the Ni/CeO₂(111) surfaces are able to catalyze the production of methane from CO and H₂, with an activity slightly higher than that of Ni(100) or Ni(111). On the other hand, at small coverages of Ni (<0.3 ML), the Ni/CeO₂(111) surfaces exhibit a very low activity for CO methanation but are very good catalysts for the water?Cgas shift reaction.     

Methyldibenzothiophene isomer ratio in crude oils: Gas chromatography tandem mass spectrometry analysis

The quantification of Methyldibenzothiophene isomers (MDBTs) is used in the geochemical characterization of crude oils. The relative ratio of these isomers can give useful information about the nature and the maturity of the source rock. This paper describes a novel analytical technique for the quantitative determination of MDBTs through triple quadrupole tandem mass spectrometry (GC-MS/MS). Through the multiple reaction monitoring (MRM) scan mode, it was possible to reach high selectivity for the MDBTs and their quantification was obtained without preliminary fractionation of the crude oil. In order to reduce the carryover of high boiling components, a recently developed backflush system in the GC program was applied. This novel protocol has been tested on sixteen samples of crude oil from different oil fields around the world. It was concluded to be more reliable than previously reported analytical methods based on selected ion monitoring (SIM) scan mode.     

Urolithin as a converging scaffold linking ellagic acid and coumarin analogues: design of potent protein kinase CK2 inhibitors

Casein kinase 2 (CK2) is a ubiquitous, essential, and highly pleiotropic protein kinase; its abnormally high constitutive activity is suspected to underlie its pathogenic potential in neoplasia and other relevant diseases. Previously, using different in silico screening approaches, two potent and selective CK2 inhibitors were identified by our group: ellagic acid, a naturally occurring tannic acid derivative (K(i)=20 nM) and 3,8-dibromo-7-hydroxy-4-methylchromen-2-one (DBC, K(i)=60 nM). Comparing the crystallographic binding modes of both ellagic acid and DBC, an X-ray structure-driven merging approach was taken to design novel CK2 inhibitors with improved target affinity. A urolithin moiety is proposed as a possible bridging scaffold between the two known CK2 inhibitors, ellagic acid and DBC. Optimization of urolithin A as the bridging moiety led to the identification of 4-bromo-3,8-dihydroxy-benzo[c]chromen-6-one as a novel, potent and selective CK2 inhibitor, which shows a K(i) value of 7 nM against the protein kinase, representing a significant improvement in affinity for the target compared with the two parent fragments.     

Application of empirical modelling in multi-layers membrane manufacturing

Multistructured membranes based on ultrafine fibers of polymethylmethacrylate-co-methacrylic acid (PMMA-co-MAA) and TiO₂ nanoparticles have been obtained by electrohydrodynamic (EHD) technologies, for active filter media manufacturing. Process optimization of the nanofibers based layers has been investigated by response surface methodology (RSM) in order to predict the domain of the parameters where the smallest fiber diameter can be achieved. A quantitative relationship between electrospinning parameters and the responses (mean diameter and standard deviation) was established and then the final multi-layers structure of nanofibers and nanoparticles has been achieved for a controlled and robust process. The nanostructured membranes have been characterized by SEM imaging, EDAX, TGA analysis and water vapour permeability and their photocatalytic activity has been tested on VOCs degradation.