Strain rate sensitivity of closed cell aluminium fly ash foam

With the increasing use of metal foams in various engineering applications, investigation of their dynamic behaviour under varying strain rate is necessary. Closed cell aluminium fly ash foam developed through liquid metallurgy route was investigated for its stress—strain behaviour at different strain rates ranging from 700 s^?1 to 1950 s^?1. The numerical model of split Hopkinson pressure bar (SHPB) was simulated using commercially available finite element code Abaqus/Explicit. Validation of numerical simulation was carried out using available experimental and numerical results. Full scale stress—strain curves were developed for various strain rates to study the effect of strain rate on compressive strength and energy absorption. The results showed that the closed cell aluminium fly ash foam is sensitive to strain rate.     

Cortactin Is Required for Efficient FAK,Src and Abl Tyrosine Kinase Activation and Phosphorylation of Helicobacter pylori CagA

Cortactin is a well-known regulatory protein of the host actin cytoskeleton and represents an attractive target of microbial pathogens like Helicobacter pylori. H. pylori manipulates cortactin’s phosphorylation status by type-IV secretion-dependent injection of its virulence protein CagA. Multiple host tyrosine kinases, like FAK, Src, and Abl, are activated during infection, but the pathway(s) involved is (are) not yet fully established. Among them, Src and Abl target CagA and stimulate tyrosine phosphorylation of the latter at its EPIYA-motifs. To investigate the role of cortactin in more detail, we generated a CRISPR/Cas9 knockout of cortactin in AGS gastric epithelial cells. Surprisingly, we found that FAK, Src, and Abl kinase activities were dramatically downregulated associated with widely diminished CagA phosphorylation in cortactin knockout cells compared to the parental control. Together, we report here a yet unrecognized cortactin-dependent signaling pathway involving FAK, Src, and Abl activation, and controlling efficient phosphorylation of injected CagA during infection. Thus, the cortactin status could serve as a potential new biomarker of gastric cancer development.     

tRNA-Dependent Import of a Transit Sequence-Less Aminoacyl-tRNA Synthetase (LeuRS2) into the Mitochondria of Arabidopsis

Aminoacyl-tRNA synthetases (AaRS) charge tRNAs with amino acids for protein translation. In plants, cytoplasmic, mitochondrial, and chloroplast AaRS exist that are all coded for by nuclear genes and must be imported from the cytosol. In addition, only a few of the mitochondrial tRNAs needed for translation are encoded in mitochondrial DNA. Despite considerable progress made over the last few years, still little is known how the bulk of cytosolic AaRS and respective tRNAs are transported into mitochondria. Here, we report the identification of a protein complex that ties AaRS and tRNA import into the mitochondria of Arabidopsis thaliana. Using leucyl-tRNA synthetase 2 (LeuRS2) as a model for a mitochondrial signal peptide (MSP)-less precursor, a ≈30 kDa protein was identified that interacts with LeuRS2 during import. The protein identified is identical with a previously characterized mitochondrial protein designated HP30-2 (encoded by At3g49560) that contains a sterile alpha motif (SAM) similar to that found in RNA binding proteins. HP30-2 is part of a larger protein complex that contains with TIM22, TIM8, TIM9 and TIM10 four previously identified components of the translocase for MSP-less precursors. Lack of HP30-2 perturbed mitochondrial biogenesis and function and caused seedling lethality during greening, suggesting an essential role of HP30-2 in planta.     

An analysis about analytical calculation of volume roots from cubic equations of state

The calculation of volume roots from cubic equation of state, for given temperature and pressure, is still an important operation both in industry and academic field. It is proposed the use of Ferrari's formula to calculate the pressure range containing three real positive roots (for pressure and temperature below the critical). In addition, a modification in the Cardano-Tartáglia's formula is proposed to provide the roots in the ascending order. For low values of reduced temperatures, it is proposed a simple and efficient approximation method to avoid the round-off errors presented by Cardano-Tartáglia's formula. It is also proposed a method for calculating the saturation pressure from cubic equations of state. Examples of the methods proposed are presented for the Van der Waals, Soave-Redlich-Kwong e Peng-Robinson equations of state in order to show the quality and reliability of the methods proposed.     

Catalytic Hydrodesulfurization of Gaseous Fuels with Autogenously Formed Hydrogen

Hydrogen production from gaseous fuels, such as natural or liquefied petroleum gas, for fuel cell application requires feedstock free of catalyst poisons. As sulfur is one of the main poisons, different methods are employed to remove sulfur species. We propose a process not requiring external hydrogen feed to the feedstock. The hydrogen for the hydrogenation of the sulfur species is obtained directly from the hydrocarbon matrix reacting on a zeolite catalyst. The result is a desulfurization process with considerably simplified process management and a superior process startup.     

Fabrication of a transversal multilayer thermoelectric generator with substituted calcium manganite

The sintering behavior and thermoelectric performance of Ca_0.99Gd_0.01Mn_0.99W_0.01O₃ was studied, and a multilayer thermoelectric generator was fabricated. The addition of CuO as sintering additive was found to be effective for the reduction in the sintering temperature from 1300°C to about 1000°C‐1050°C. Dense samples were obtained after firing at 1050°C, whereas some porosity remained after firing at 1000°C. Samples sintered at reduced temperature exhibit lower electrical conductivity, whereas the Seebeck coefficient S = ?150 μV/K at 100°C is not affected by lowering the sintering temperature. The figure of merit is ZT = 0.12 at 700°C for samples sintered at 1300°C; ZT = 0.08 and 0.03 were obtained for multilayer laminates sintered at 1050°C and 1000°C, respectively. A transversal multilayer thermoelectric generator (TMLTEG) was built by stacking layers of substituted CaMnO₃ green tapes, and printing AgPd conductor stripes onto the thermoelectric layers at an angle of 30° relative to the direction of the heat flow. The multilayer stack was co‐fired at 1000°C. The TMLTEG has a power output of 2.5 mW at ?T= 200 K in the temperature interval of 25°C‐300°C. A meander‐like generator with larger power output comprising six TMTEGs is also presented.     

Transverse thermoelectric multilayer generator with bismuth-substituted calcium cobaltite: Design optimization through variation of tilt angle

Sintering of Ca_2.7Bi_0.3Co₄O₉ pellets and multilayer laminates at 920 °C results in a ceramic microstructure with low density with a pronounced anisotropy. The electrical conductivity of multilayers is 56 S/cm at 400 K (perpendicular to pressing direction). The Seebeck coefficient is positive, and the power factor increases from 60 μW/(K²m) at 400 K to 200 μW/(K²m) at 900 K. The thermal conductivity (parallel to pressing direction) is 0.65 W/(mK). Transverse multilayer thermoelectric generators (TMLTEG) were fabricated by stacking layers of Ca_2.7Bi_0.3Co₄O₉ green tapes, screen-printing of AgPd stripes at various tilt angle φ relative to the heat flux direction (20°, 45°, and 65°), and co-firing at 920 °C. For φ = 65° the power output is 8 mW at ΔT = 200 K with room temperature at the cold side. FEM modelling as well as analytical calculations agree well with measurements, and the optimum tilt angle is found to be φ = 58°.     

Bioorthogonally Applicable Fluorescence Deactivation Strategy for Receptor Kinetics Study and Theranostic Pretargeting Approaches

The availability of a receptor for theranostic pretargeting approaches was assessed by use of a new click‐chemistry‐based deactivatable fluorescence‐quenching concept. The efficacy was evaluated in a cell‐based model system featuring both membranous (available) and internalized (unavailable) receptor fractions of the clinically relevant receptor chemokine receptor 4 (CXCR4). Proof of concept was achieved with a deactivatable tracer consisting of a CXCR4‐specific peptide functionalized with a Cy5 dye bearing a chemoselective azide handle (N₃‐Cy5‐AcTZ14011). Treatment with a Cy7 quencher dye (Cy7‐DBCO) resulted in optically silent Cy7‐[click]‐Cy5‐AcTZ14011. In situ, a >90 % FRET‐based reduction of the signal intensity of N₃‐Cy5‐AcTZ14011 [K_D=(222.4±25.2) nm ] was seen within minutes after quencher addition. In cells, discrimination between the membranous and the internalized receptor fraction could be achieved through quantitative assessment of quenching/internalization kinetics. Similar evaluation of an activatable tracer variant based on the same targeting moiety (Cy5‐S‐S‐Cy3‐AcTZ14011) was unsuccessful in vitro. As such, using the described deactivatable approach to screen membrane receptors and their applicability in receptor‐(pre‐)targeted theranostics can become straightforward.     

Oxide multilayer thermoelectric generators

Oxide multilayer thermoelectric generators (MLTEG) were fabricated, using the standard multilayer technology. Green tapes of p‐type La₂CuO₄ and n‐type Nd₂CuO₄ thermoelectric oxides were stacked with intermediate insulating glass layers. Electrical contacts between thermoelectric oxides were applied, using screen‐printing of AgPd paste, and multilayers were cofired at 1000°C. However, cofiring of four different materials turned out to be very challenging, and contact resistance problems frequently led to device malfunctions. We developed a new concept of a transversal multilayer thermoelectric generator (TMLTEG), which is characterized by a simple design. This generator is build up by stacking layers of a p‐ or n‐type thermoelectric oxide and printing stripes of AgPd paste onto the thermoelectric layers at an angle with respect to the temperature gradient. Transversal multilayer thermoelectric generators were fabricated using p‐type La₂CuO₄, or n‐type substituted CaMnO₃; cofiring of the multilayer stacks was performed at 1000°C. The TMLTEG based upon p‐type lanthanum cuprate exhibits a power output of 7.8 mW at ?T= 200 K in the low temperature range of 25‐135°C. Materials issues, cofiring characteristics, design and the thermoelectric performance of multilayer TEGs will be discussed.     

Interaction of slip‐ and flame‐spray coated carbon‐bonded alumina filters with steel melts

Ceramic foam filters play an essential role in the quest for cleanliness of cast steel parts as they facilitate turbulence reduction during mold filling as well as removal of nonmetallic inclusions. A coating on these filters is able to increase their strength and filtration efficiency by improving the adhesion of inclusions to the filter strands. In this study, Al₂O₃‐C filters were coated with an alumina slip via slip and flame spraying. The phase composition and the microstructure of the coatings were investigated before and after immersion into molten steel contained in a metal casting simulator. After contact with molten steel, Al₂O₃‐C reference filter shows intense decarburization which often influence the quality of cast steel parts due to formation of gas bubbles. Slip‐sprayed alumina coatings on such a filter promote the deposition of inclusions due to formation of a vitreous alumina layer but will also cause gas bubble formation as they exhibit a high porosity. Flame‐spray coatings have low porosity and hence, prevent formation of gas bubbles. Furthermore, they showed the highest reactivity toward the steel melt and hence, are recommended for filtration of cast products with a high demand on cleanliness.