Podcasting in education: Are students as ready and eager as we think they are?

Instructors in higher education are disseminating instructional content via podcasting, as many rally behind the technology’s potential benefits. Others have expressed concern about the risks of deleterious effects that might accompany the adoption of podcasting, such as lower class attendance. Yet, relatively few studies have investigated students’ perceptions of podcasting for educational purposes, especially in relation to different podcasting forms: repetitive and supplemental. The present study explored students’ readiness and attitudes towards these two forms of podcasting to provide fundamental information for future researchers and educators. The results indicated that students may not be as ready or eager to use podcasting for repetitive or supplemental educational purposes as much as we think they are, but they could be persuaded.     

Coherency Hub Design for Multisocket Sun Servers with CoolThreads Technology

CoHub, a coherency hub ASIC, provides a cost-effective way to extend a glueless two-node chip-multithreading system to a four-node system without changes to the processor. The four-node, 256-thread system achieves near-linear scaling of performance with thread count on transaction-processing workloads. Time-to-market pressure, 800-MHz operation, and a six-stage pipeline were among the constraints that shaped CoHub's design.     

An investigation of multiphase CFD modelling of a lateral sloshing tank

A near-resonant, sway-induced sloshing flow in a rectangular tank is used to compare a homogeneous and inhomogeneous multiphase approach for fluid density and viscosity in a commercial CFD code. Dimensional analysis of the relative motion between the phases suggests the application of an inhomogeneous multiphase model whereas previous published work has used the computationally cheaper homogeneous (or average property) approach. The comparison between the computational and experimental results shows that the homogeneous model tends to underestimate the experimental peak pressures by up to 50%. The inhomogeneous multiphase model gives good agreement with the experimental pressure data. Examination of the relative velocity at the fluid interface confirms that the inhomogeneous model is the appropriate model to use for the simulation of a violent sloshing flow.     

Integrating airborne multispectral imagery and airborne LiDAR data for enhanced lithological mapping in vegetated terrain

Practical and financial constraints associated with traditional field-based lithological mapping are often responsible for the generation of maps with insufficient detail and inaccurately located contacts. In arid areas with well exposed rocks and soils, high-resolution multi- and hyperspectral imagery is a valuable mapping aid as lithological units can be readily discriminated and mapped by automatically matching image pixel spectra to a set of reference spectra. However, the use of spectral imagery in all but the most barren terrain is problematic because just small amounts of vegetation cover can obscure or mask the spectra of underlying geological substrates. The use of ancillary information may help to improve lithological discrimination, especially where geobotanical relationships are absent or where distinct lithologies exhibit inherent spectral similarity. This study assesses the efficacy of airborne multispectral imagery for detailed lithological mapping in a vegetated section of the Troodos ophiolite (Cyprus), and investigates whether the mapping performance can be enhanced through the integration of LiDAR-derived topographic data. In each case, a number of algorithms involving different combinations of input variables and classification routine were employed to maximise the mapping performance. Despite the potential problems posed by vegetation cover, geobotanical associations aided the generation of a lithological map - with a satisfactory overall accuracy of 65.5% and Kappa of 0.54 - using only spectral information. Moreover, owing to the correlation between topography and lithology in the study area, the integration of LiDAR-derived topographic variables led to significant improvements of up to 22.5% in the overall mapping accuracy compared to spectral-only approaches. The improvements were found to be considerably greater for algorithms involving classification with an artificial neural network (the Kohonen Self-Organizing Map) than the parametric Maximum Likelihood Classifier. The results of this study demonstrate the enhanced capability of data integration for detailed lithological mapping in areas where spectral discrimination is complicated by the presence of vegetation or inherent spectral similarities.     

A well-based reverse-phase protein array applicable to extracts from formalin-fixed paraffin-embedded tissue

Proteomic analysis of formalin-fixed paraffin-embedded (FFPE) tissue offers significant diagnostic utility but is complicated due to the high level of covalently crosslinked proteins arising from formalin fixation. To address these challenges, we developed a reliable protein extraction method for FFPE tissue, based on heat-induced antigen retrieval within a pressure cooker. The protein extraction yield from archival FFPE tissue section is approximately 90% of that recovered from frozen tissue. This method demonstrates preservation of immunoreactivity and recovery of full-length proteins by Western blotting. Additionally, we developed a well-based RP protein array platform utilizing an electrochemiluminescence detection system. Protein samples derived from FFPE tissue by means of laser capture dissection, with as few as 500 shots demonstrate measurable signal differences for different proteins. The lysates coated to the array plate, remain stable over 1?month at room temperature. Theses data suggest that this new protein-profiling platform coupled with the protein extraction method can be used for molecular profiling analysis in FFPE tissue, and contribute to the validation and development of biomarkers in clinical studies.     

The importance of different timings of excitatory and inhibitory pathways in neural field models

In this paper, we consider a neural field model comprised of two distinct populations of neurons, excitatory and inhibitory, for which both the velocities of action potential propagation and the time courses of synaptic processing are different. Using recently-developed techniques, we construct the Evans function characterising the stability of both stationary and travelling wave solutions, under the assumption that the firing rate function is the Heaviside step. We find that these differences in timing for the two populations can cause instabilities of these solutions, leading to, for example, stationary breathers. We also analyse "anti-pulses", a novel type of pattern for which all but a small interval of the domain (in moving coordinates) is active. These results extend previous work on neural fields with space-dependent delays, and demonstrate the importance of considering the effects of the different time-courses of excitatory and inhibitory neural activity.     

Image-based stained glass

We present a method of restyling an image so that it approximates the visual appearance of a work of stained glass. To this end, we develop a novel approach which involves image warping, segmentation, querying, and colorization along with texture synthesis. In our method, a given input image is first segmented. Each segment is subsequently transformed to match real segments of stained glass queried from a database of image exemplars. By using real sources of stained glass, our method produces high quality results in this nascent area of nonphotorealistic rendering. The generation of the stained glass requires only modest amounts of user interaction. This interaction is facilitated with a unique region-merging tool     

The measurement of shear compliances for oriented polyethylene terephthalate sheet

Two techniques have been used to measure the shear compliances of one-way drawn uniplanar-axially-oriented polyethylene terephthalate (PET) sheet, draw ratio 51; a torsional method for all three compliancesS ₄₄,S ₅₅ andS ₆₆, and a recently-developed simple-shear method forS ₄₄ andS ₆₆. The two techniques gave values for the compliances in common which agreed very well. An examination of end effects in torsion has also been made. The determination of the three shear compliances complete the determination of all nine independent compliances for this PET sheet. The overall mechanical anisotropy has been considered in the light of existing structural information, and comparison made with the elastic constants of isotropic PET and a highly oriented PET fibre on the basis of the single-phase aggregate model.     

A study of ergonomics factors in washbasin design

A 4-week UNESCO-sponsored mission to the Department of Architecture, Karadeniz Technical University in Eastern Turkey, gave an opportunity to apply ergonomics techniques to some aspects of that country's domestic washbasin design. The study was intended to provide experience in questionnaire design and administration, in the application of psycho-physical methods, and to highlight the importance of determining user characteristics and preferences with regard to the built environment. A field study elicited information on dimensions and positioning of existing wash-basins and ancillary equipment and the opinions of users as to the suitability of these features in relation to the activities performed. A laboratory study, using an adjustable rig permitting variation in the heights of basin, taps and mirror/shelf, followed. The data obtained on preferred heights of these items led to the conclusions that basin height should be increased to between 95 and 100 cm to satisfy the majority of users; tap height above the basin should be reduced to about 11 cm; the shelf and lower edge of a mirror sited above the basin should be 136 cm above the floor; and a clear space of 110 cm should be available between the front of the basin and a wall or other obstruction. Suggestions on other design aspects of the bathroom, resulting from the study, are discussed.