黄麦岭磷矿矿石工艺矿相学研究

经红外光谱测试及单矿物化学分析，确定了磷灰石的种类；通过显微镜观察，系统地研究了不同自然类型磷矿石中磷灰石的嵌布嵌镶关系；利用线测法测定了磷灰石的嵌布粒度；采用一粗一精一扫浮选流程，按原来的浮选条件和药剂制度所得精矿，研究了其单体解离度及选矿回收率；提出了改进选矿工艺流程的可能途径和方法。     

SARS灭活疫苗的研制及其质量控制

目的研究适合SARS病毒灭活疫苗的生产工艺及其质量控制。方法连续制备3批疫苗,按拟定规程进行疫苗原液和疫苗各项指标检测。结果各项检测指标均符合拟定规程规定。结论我所生产的SARS灭活疫苗工艺稳定,质量可控。     

废砂/PE废地膜复合材料热老化性能的研究

以聚乙烯(PE)废地膜和工业废砂为原料,制备了不同配比的废砂/PE废地膜复合材料,研究了PE基体和复合材料的热老化规律。研究发现,经80℃人工加速热老化处理后,复合材料的玻璃化转变温度(Tg)随老化时间的增加而降低;一定条件下的热老化有助于加强PE基体和废砂间的界面作用,使复合材料的力学性能先升高后降低;废砂的加入有利于PE废地膜热老化性能的提高。     

Design and fabrication of 3D‐plotted polymeric scaffolds in functional tissue engineering

Regenerating the load‐bearing tissues requires 3D scaffolds that balance the temporary mechanical function with the biological requirements. In functional tissue engineering, designing scaffolds with biomimetic mechanical properties could promote tissue ingrowth since the cells are sensitive to their local mechanical environment. This work aims to design scaffolds that mimic the mechanical response of the biological tissues under physiological loading conditions. Poly(L ‐lactide) (PLLA) scaffolds with varying porosities and pore sizes were made by the 3D‐plotting technique. The scaffolds were tested under unconfined ramp compression to compare their stress profile under load with that of bovine cartilage. A comparison between the material parameters estimated for the scaffolds and for the bovine cartilage based on the biphasic theory enabled the definition of an optimum window for the porosity and pore size of these constructs. Moreover, the finite element prediction for the stress distribution inside the scaffolds, surrounded by the host cartilaginous tissue, demonstrated a negligible perturbation of the stress field at the site of implantation. The finite element modeling tools in combination with the developed methodology for optimal porosity/pore size determination can be used to improve the design of biomimetic scaffolds. POLYM. ENG. SCI., 47:608–618, 2007. © 2007 Society of Plastics Engineers.     

国产子午线轮胎专用天然橡胶应用试验

通过对国产子午线轮胎专用天然橡胶的化学分析、物理性能检验和进行胎面胶、胎体胶的小配合、大配合胶料试验，并与进口天然橡胶试验结果进行对比，研制了一批用国产子午线轮胎专用天然橡胶生产的９．００Ｒ２０全钢子午线轮胎作里程试验。试验结果表明，国产专用天然橡胶只要适当降低塑性初值（Ｐ＿０）和生胶门尼粘度，按国际通用标准进行包装，完全可以代替马来西亚标准橡胶（ＳＭＲ１０和ＳＭＲ２０）用于子午线轮胎生产中。     

硅氮聚合物交联的室温硫化橡胶的研究Ⅰ．热稳定性的研究

本文利用硅氮聚合物作文联剂使双组分缩合型室温硫化硅橡胶在不需要催化剂存在下就能交联硫化，通过时硫化胶老化后的热失重、交联密度和力学性能的测定，表明这种硫化胶的耐温性能由２００℃提高到３５０℃。对硫化胶的降解动力学研究表明：降解反应活化能由７０ｋＪ／ｍｏｌ提高到３３０ｋＪ／ｍｏｌ，这是由于消除了端基引发的主链降解。     

新型无机絮凝剂聚硅酸铝的制备及其模拟净水试验

以硫酸铝为主要原料，引入硅酸根，在高速剪切的条件下，经过聚合，熟化反应合成出有效铝含量(以Al2O3计)9．5％～12％，碱化度45％～55％，pH2．8～3．8的半透明液体PASS，该产品稳定性好，处理后水中的铝残余远小于PAC。对产品用硅藻土配的浊度水进行絮凝试验，并与PAC、硫酸铝对比，去浊效果是PAC的一倍。且不受pH因素影响。     

Continuous ethanol production from wood hydrolysate by chemostat and total cell retention culture

Chemostat and total cell retention cultures with internal filter system ofSaecharomyc.es cerevisiae H1-7 were carried out to produce ethanol from wood hydrolysate. Maximum ethanol productivity obtained in a chemostat with the aeration rate of 1 vvm was 3.79 g/(L·h). This was 20% higher than that in a chemostat without aeration. However, the substrate was not completely consumed at the dilution rate with the maximum productivity. The realistic productivity, which has higher than 99% conversion rate of substrate, was. 2.95 g/(L·h). The maximum productivity in the total cell retention culture was 6.65 g/(L·h) at the dilution rate of 0.19 h¹ and the residual glucose concentration was negligible.     

网络时代保密面临的挑战及对策

随着信息网络技术的发展,网络已经存在于人们生活的每个角落,并且给人们带来很大的便利。由于网络是一个开放的系统,对网络的安全和信息的保密的措施还不完善,存在着安全隐患,网络安全形势日趋严峻。目前,所有的企业资料都是通过网络来存储的,并且大部分工作离不开网络,网络安全一旦有问题,那么信息保密必然存在风险,这样会给企业带来无法弥补的损失。本文的网络安全与信息保密的概念以及存在的风险和预防措施进行简要的分析。     

褐煤成型的研究

由于褐煤具有含水率高，灰份大，易风化，发热值低等特点，使得成型难度很大．本文重点研究水份粒度、添加剂、成型压力等对褐煤成型的影响．最佳条件：粒度＜１ｍｍ，水份１４～１６％，压力＞５０Ｔｆ，添加剂１０～２０％．