Enhanced Photocatalytic Hydrogen Evolution Over CaTi1−x Zr x O3 Composites Synthesized by Polymerized Complex Method

The solid solution of CaTi_1−x Zr _x O₃ (x = 0–0.15) was successfully synthesized by the polymerized complex (PC) method. This study has exhibited the advantage of the PC method to prepare a highly active CaTiO₃ compared with the conventional solid-state reaction (SSR) method. More importantly, further improvement in phase purity and large surface area was achieved by the doping of Zr⁴⁺, leading to remarkable enhancement of photocatalytic activities compared to pure CaTiO₃. The quantum yield for H₂ evolution over the most active photocatalyst, Pt (1.0 wt%)/CaTi_0.93Zr_0.07O₃, was 1.91% and 13.3% in photoreactions from pure water and aqueous ethanol solution, respectively for 0.1 g photocatalyst, which was about 3.3 and 2.5 times compared to that of PC-derived CaTiO₃.     

Preparation and electrical conductivity of polyethers/WS2 layered nanocomposites

Utilizing the solvothermal synthesis technique, lithium intercalated tungsten disulfide Li_xWS₂ with x > 1 was obtained, which was allowed to react with water to the formation of single-molecule-layer suspension of tungsten disulfide. The layered nanocomposites PEG, PEO/WS₂, intercalating poly(ethylene glycol) (PEG, MW ≈ 1 × 10³, 6 × 10³, 1 × 10⁴) and poly(ethylene oxide) (PEO, MW ≈ 3 × 10⁵) into the tungsten disulfide host galleries, were prepared using the improved exfoliation-adsorption technique. It was revealed that the intercalated polymers within the host galleries are in a double-layer arrangement with an interlayer expansion of about 9 Å. Despite high conductivity of the host material, those of the PEG, PEO/WS₂ nanocomposites were found to be high in the order of 1 × 10⁻² to 10⁻³ S cm⁻¹ at ambient temperature, resulted from the guest-host charge transfers.     

Ni纳米粉体及其合金的制备与研究进展

纳米Ni及其合金是一类重要的磁性材料和抗磨损材料,被广泛用于催化剂、电池、涂层、通讯以及电子等诸多领域。本文就纳米Ni及其合金的制备进行综述,描述和分析了目前各种主要制备方法的特征及各自的优缺点,并对其应用前景作出了进一步的展望。     

不锈钢冶炼用不烧镁钙砖的研制及应用

介绍了冶炼不锈钢用不烧镁钙砖的研制过程及其在冶炼不锈钢的 90tAOD炉炉帽和 90t装入包包底的应用情况。结果表明 :在 90t装入包包底的使用寿命达 1 1 0次 ,最大侵蚀速度仅为 1 .50mm·次 -1 左右 ;在 90tAOD炉炉帽上的使用寿命达 2 1 7次 ,最大侵蚀速度仅 0 .55mm·次-1 ,但存在裂纹和剥落现象 ,今后应改进砖型设计 ,增加调整砖 ,以消除砌缝 ,提高衬砖的整体性和稳固性     

氮化硅基陶瓷连接技术的研究进展

陶瓷连接技术是结构陶瓷实用化的有效手段，焊料成分对连接体的性能具有决定性作用。本文主要从焊料成分选择的角度，总结了氮化硅基陶瓷连接技术的发展现状；并重点讨论了陶瓷／玻璃复合焊料在β-Sialon陶瓷连接中的应用。     

基于CAD/CAE/CAM/RP的复杂陶瓷产品快速制造技术

针对目前手工方式的卫生洁具等复杂陶瓷产品的研发过程,借鉴CAD/CAE/CAM/RP技术在其它制造行业中应用的成功经验,将这些先进制造技术应用于卫生洁具等复杂陶瓷产品的研发中;CAD用于设计产品和模具的模型,CAE用于模拟洁具冲水过程和分析冲水性能,RP用于制作洁具产品的原型,CAM用于加工试用石膏工作模具。就这些技术的应用提出了两种主要方案,并分析了各自的特点。经过实际应用表明:先进制造技术的应用能大大缩短产品研发周期、提高产品质量、降低开发成本。     

Ultrasonic spray pyrolysis of nano crystalline spinel LiMn2O4 showing good cycling performance in the 3 V range

Spherical lithium manganese oxide spinel was synthesized by an ultrasonic spray pyrolysis method, and has been characterized using X-ray diffraction, scanning electron microscopy, transimission electron microscopy and electrochemical cycling at 3 V regions. The LiMn₂O₄ powders were composed of about 10 nm-sized primary particles. The delivered discharge capacity of the synthesized nano-material was 125 mAh g⁻¹ between 2.4 and 3.5 V and its retention was about 96% upon 50 cycling. From the high resolution transmission electron microscopic study, it was found that structural transition of the parent material did not occur even after the 50th electrochemical cycling on the 3 V region. It seems that the reversible structural change is possible for nanocrystalline LiMn₂O₄ as observed by the X-ray diffraction and transition electron microscopic observations.     

Immobilization of a cyclodextrin glucanotransferase (CGTase) onto polyethylene film with a carboxylic acid group and production of cyclodextrins from corn starch using CGTase‐immobilized PE film

Carboxylic acid groups were introduced onto polyethylene (PE) film by radiation‐induced graft copolymerization. Subsequently, the clodextrin glucanotransferase (CGTase) was immobilized on the PE film with a carboxylic acid group. The activity of the immobilized CGTase on PE film was in the range of 0.40–1.04 U/cm² per min. The production of cyclodextrins (CDs) from corn starch was examined using the CGTase‐immobilized PE film. The production ratios of CDs using CGTase‐immobilized PE film was in the following order: α–CD > β–CD > γ–CD. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2451–2457, 2002     

Preparation,characterization, and adsorption properties for metal ions of a novel chelating resin containing sulfoxide and diethylene glycol

A novel chelating resin containing sulfoxide and diethylene glycol, poly{4‐vinylbenzyl‐[2‐2‐(hydroxyethyl)ethoxyl]sulfoxide} (PVESO) was synthesized using chloromethylated polystyrene (PS‐Cl) as material. Its structure was characterized by elemental analysis, infrared spectra, and scanning electron microscopy (SEM). The adsorption capacities of the resin for Hg²⁺, Ag⁺, Cu²⁺, Zn²⁺, and Pb²⁺ at various pH values were determined. The maximum adsorption capacities for Hg²⁺ and Ag⁺ were 1.56 and 0.75 mmol g^?1 respectively. The resin had high selectivity for Hg²⁺ and Ag⁺ over the pH range 1.0–7.0. The adsorption capacities for Hg²⁺ and Ag⁺ under competitive condition were also determined by batch experiment method. In addition, the adsorption kinetics of the resin towards Hg²⁺ at different temperatures was also investigated. The results showed that the adsorption rate was governed by film diffusion at 20°C and 25°C, by particle diffusion at 30°C and 35°C. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 6054–6059, 2006     

注塑级PVC／ABS合金的性能及其加工

阐述了注塑用聚氯乙烯/丙烯腈-丁二烯-苯乙烯共聚物(PVC/ABS)合金的制备工艺以及合金组成与冲击强度和屈服应力的关系,分析了影响注塑工艺条件的因素,并对体系的热稳定性和流变特性及其影响因素也作了简要的论述。