Membrane treatment of side-stream cooling tower water for reduction of water usage

A pilot study was conducted to determine whether membrane treatment on a side stream of recirculating cooling-tower water could reduce overall water usage and discharge. The treated permeate was returned to the cooling tower while the concentrate was discharged to the sanitary sewer. Flow rates, pressures and water chemistry were monitored. The pilot demonstrated potential substantial water savings. Maximum make-up water and discharge reduction were 16% and 49%, respectively. As high as possible permeate recovery is needed to maximize water conservation. Silica scaling on the membranes limited water savings in this pilot. Development of membranes with a solute-rejection capacity less than the 92% average of the membranes used in the pilot would assist in optimizing water savings. Decreased water outlays compensated for the additional energy used by membrane treatment. Scaling control is critical for economic operation.     

Relationships between glucose, energy intake and dietary composition in obese adults with type 2 diabetes receiving the cannabinoid 1 (CB1) receptor antagonist, rimonabant

ABSTRACT: BACKGROUND: Weight loss is often difficult to achieve in individuals with type 2 diabetes and anti-obesity drugs are often advocated to support dietary intervention. Despite the extensive use of centrally acting anti-obesity drugs, there is little evidence of how they affect dietary composition. We investigated changes in energy intake and dietary composition of macro- and micronutrients following therapy with the endocannabinoid receptor blocker, rimonabant. METHODS: 20 obese patients with type 2 diabetes were studied before and after 6 months dietary intervention with rimonabant. Dietary intervention was supervised by a diabetes dietician. Five-day food diaries were completed at baseline and at 6 months and dietary analysis was performed using computer software (Dietplan 6). RESULTS: After 6 months, (compared with baseline) there were reductions in weight (107+/-21Kg versus 112+/-21, p<0.001, 4% body weight reduction), and improvements in HbA1c (7.4+/-1.7 versus 8.0+/-1.6%, p<0.05) and HDL cholesterol. Intake of energy (1589+/-384 versus 2225+/-1109kcal, p<0.01), carbohydrate (199+/-74 versus 273+/-194g, p<0.05), protein (78+/-23 versus 98+/-36g, p<0.05), fats (55+/-18 versus 84+/-39g, p<0.01) and several micronutrients were reduced. However, relative macronutrient composition of the diet was unchanged. Improvement in blood glucose was strongly correlated with a reduction in carbohydrate intake (r = 0.76, p<0.001). CONCLUSIONS: In obese patients with type 2 diabetes, rimonabant in combination with dietary intervention led to reduced intake of energy and most macronutrients. Despite this, macronutrient composition of the diet was unaltered. These dietary changes (especially carbohydrate restriction) were associated with weight loss and favourable metabolic effects.     

Synthesis and evaluation of 1-amino-6-halo-β-carbolines as antimalarial and antiprion agents

Malaria is one of the world's most devastating parasitic diseases, causing almost one million deaths each year. Growing resistance to classical antimalarial drugs, such as chloroquine, necessitates the discovery of new therapeutic agents for successful control of this global disease. Here, we report the synthesis of some 6-halo-β-carbolines as analogues of the potent antimalarial natural product, manzamine A, retaining its heteroaromatic core whilst providing compounds with much improved synthetic accessibility. Two compounds displayed superior activity to chloroquine itself against a resistant Plasmodium falciparum strain, identifying them as promising leads for future development. Furthermore, in line with previous reports of similarities in antimalarial and antiprion effects of aminoaryl-based antimalarial agents, the 1-amino-β-carboline libraries were also found to possess significant bioactivity against a prion-infected cell line.     

Enhancement of mechanical and thermal properties of polycaprolactone/chitosan blend by calcium carbonate nanoparticles

This study investigates the effects of calcium carbonate (CaCO(3)) nanoparticles on the mechanical and thermal properties and surface morphology of polycaprolactone (PCL)/chitosan nanocomposites. The nanocomposites of PCL/chitosan/CaCO(3) were prepared using a melt blending technique. Transmission electron microscopy (TEM) results indicate the average size of nanoparticles to be approximately 62 nm. Tensile measurement results show an increase in the tensile modulus with CaCO(3) nanoparticle loading. Tensile strength and elongation at break show gradual improvement with the addition of up to 1 wt% of nano-sized CaCO(3). Decreasing performance of these properties is observed for loading of more than 1 wt% of nano-sized CaCO(3). The thermal stability was best enhanced at 1 wt% of CaCO(3) nanoparticle loading. The fractured surface morphology of the PCL/chitosan blend becomes more stretched and homogeneous in PCL/chitosan/CaCO(3) nanocomposite. TEM micrograph displays good dispersion of CaCO(3) at lower nanoparticle loading within the matrix.     

Ab Initio Calculations of Pristine and Doped Zirconia Σ5 (310)/[001] Tilt Grain Boundaries

The structure of the cubic-ZrO₂ symmetrical tilt Σ5 (310)/[001] grain boundary is examined using density functional theory within the local density and pseudopotential approximations. Several pristine stoichiometric grain-boundary structures are investigated and compared with Z-contrast scanning transmission electron microscopy and electron energy loss spectroscopy results. The lowest-energy grain-boundary structure is found to agree well with the experimental data. When Y³⁺ is substituted for Zr⁴⁺ at various sites in the lowest-energy grain-boundary structure, the calculations indicate that Y³⁺ segregation to the grain boundary is energetically preferred to bulk doping, in agreement with experimental results.     

Solid Yttria-Stabilized Zirconia Films by Pulsed Chemical Vapor Deposition from Metal-organic Precursors

A pulsed chemical vapor deposition from metal-organic precursors (MOCVD) system was used to produce solid zirconia, and yttria-stabilized zirconia (YSZ) films. A total of six candidate metal-organic precursors for zirconia and three for yttria were investigated. Three precursor solutions for YSZ proved suitable for pulsed-MOCVD processing. Layers were deposited on metal, alumina, and porous nickel cermet substrates. Under optimal deposition conditions, precursor conversion efficiency of 90% was achieved using a solution of 3.74 vol% zirconium 2-methyl-2-butoxide + 0.42% yttium methoxyethoxide in toluene. The film growth rate was 7.5 μm·h⁻¹ at 525°C deposition temperature. Two alkoxide precursors produced YSZ layers with material costs under $0.50/(μm·cm²).     

First year growth of preterm infants fed standard compared to marine oil n−3 supplemented formula

Very low birth weight (VLBW) infants (748–1390 g, n=65) were randomly assigned to receive control or marine oil-supplemented formula when they achieved intakes >454 kJ (110 kcal)/kg/d of a formula designed for VLBW infants. Study formulas with or without marine oil were provided until 79 wk of postconceptional age (PCA), first in a formula designed for preterm infants followed by a formula designed for term infants. Infants were studied at regular intervals through 92 wk PCA. Weight, length, and head circumference were determined by standardized prodedures and normalized to the National Center for Health Statistics figures for growth of infants born at term of the same age and gender. Mean normalized weight, weight-to-length, and head circumference were greatest at 48 wk and decreased thereafter. The decline in normalized weight was greater in infants fed the marine oil-supplemented formula. Beginning at 40 wk, marine oil-supplemented infants compared to controls had significantly poorer Z-scores for weight, length and head circumference. In addition, birth order (negatively) and maternal height (positively) influenced weight and length achievement in infancy as shown previously in infants born at term. Based on a paper presented at the Symposium on Milk Lipids held at the AOCS Annual Meeting, Baltimore, MD, April 1990.     

The introduction of alkyl,ester, carboxylate,amino, hydroxyl,and phosphate functional groups to the surface of polyethylene

The surface of polyethylene was derivatized with ester, carboxylate, amino, hydroxyl, and phosphate functional groups. α, ω bifunctional alkanes, containing on one end a primary amine, were coupled to oxidized polyethylene through an amide linkage. Polyethylene was first oxidized with chromic acid, the carboxylate groups were converted to the acyl chloride with phosphorus pentachloride, and then reacted with a primary amine to give the covalently bound amide. The copposing ends of the bifunctional alkanes were the methyl, tertiary amine, ester, and hydroxyl groups. The ester was converted to the carboxylate by acid cleavage and the hydroxyl group converted to the phosphate by treatment first with phosphorus oxychloride and then aqueous base. Attenuated total reflection FTIR, XPS, and pH-dependent contact angle wetting were used to characterize the surfaces. The FTIR data were used to confirm the formation of the amide and to detect an undesired carboxylate/ammonium ion complex formed in the presence of trace amounts of water. XPS data were used to confirm expected changes in elemental composition and to provide quantitative estimates of the yields. Oxidation of the polyethylene introduced 5 × 10¹⁴ carboxylate groups/cm² in the 25 Å XPS sampling depth. Of these, up to 98% could be converted to the amide. The advancing contact angle data confirmed the acid/base behavior of the functional groups.     

Synthesis of Chemically Stabilized Cristobalite

The synthesis of chemically stabilized cristobalite (CSC) by a wet-chemical route is described. CSC is a form of silica (containing small amounts of other oxides) which is similar in many ways to β-cristobalite, but does not invert to α-cristobalite upon cooling. The effects of changing the dopant levels and various synthetic parameters on the phases formed in the CaO-Al₂O₃-SiO₂ system have been investigated. Stabilization of cristobalite with a number of different dopant combinations has been attempted, with mixed results. The use of wet-chemical techniques has led to the synthesis of apparently phase-pure CSC in a composition region where traditional solid-state synthetic techniques yield a mixture of other phases.     

Dealumination–aging pattern of REUSY zeolites contained in fluid cracking catalysts

The evolution of the properties of a REUSY zeolite contained in a fluid cracking catalyst was investigated under laboratory steam deactivation procedures and in age fractions of the corresponding equilibrium catalyst (Ecat). The aging pattern, defined by the evolution of the zeolite surface area (ZSA) related to the decrease of the unit cell size (UCS), was similar between lab-steamed zeolites and Ecat fractions. A sharp drop in ZSA occurred at ca. 2.430 nm UCS. A study done by FT-IR spectroscopy suggested that zeolite dealumination initially took place more extensively on the sodalite cages and double six-member rings (D6R) of the structure and that the final collapse of the zeolite framework occurred through destruction of the 12-member rings (12M). This can be explained by a crystal fracture and break down process and disassembling of the sodalite cages in the faujasite structure. NH₃ microcalorimetry showed that strong acid sites in faujasites are destroyed by steam aging, but this effect does not lead to a reduction in the cracking activity of the Ecat form. The microactivity test (MAT) showed that the specific activity declined sharply at 2.430 nm UCS. Differences in product selectivity were related to the extent of damage of the zeolite, extra-framework alumina and mesoporosity. While further aging canceled the effect attributed to extra-framework alumina differences attributed to mesoporosity increased.