A fuzzy-logic approach to HTR nuclear power plant model control

The fuzzy-set theory is used to incorporate linguistic ‘rules of the thumb’ of a human operator in the HTR nuclear power plant controller. The results of the extensive computer simulations are encouraging and confirm the usefulness of this approach in nuclear power plant control. In the Appendix a short introduction to fuzzy logic is given.     

Optical and chemical characteristics of the atmospheric aerosol in four towns in southern Poland

The absorption coefficient a(p) [m(-1)] as well as the mass absorption coefficient sigma(p) [m(2)/g] has been estimated for PM10 and PM2.5 in four towns located in southern Poland, based on the assumption that the reflectance of aerosol-laden filters is a good proxy for the absorptivity of aerosols. The optical properties of the airborne particles were also compared with their surface composition obtained by photoelectron spectroscopy (XPS). It was found that coarse particles, which constituted 20-30% of PM10, exhibited insignificant contribution to the absorption. The most absorptive aerosols were found in the towns located in Upper Silesia, a highly industrialized area. This reflects both the relative content of carbon in PM2.5 and the mass concentration of the fine mode. It was found that oxides and sulfates play an important role in promoting the reflectance of light from aerosols in the winter. These results support the suggestion that the revision of existing air quality standards for particulate pollution is needed.     

A versatile wavelet domain noise filtration technique for medical imaging

In this paper, we propose a robust wavelet domain method for noise filtering in medical images. The proposed method adapts itself to various types of image noise as well as to the preference of the medical expert; a single parameter can be used to balance the preservation of (expert-dependent) relevant details against the degree of noise reduction. The algorithm exploits generally valid knowledge about the correlation of significant image features across the resolution scales to perform a preliminary coefficient classification. This preliminary coefficient classification is used to empirically estimate the statistical distributions of the coefficients that represent useful image features on the one hand and mainly noise on the other. The adaptation to the spatial context in the image is achieved by using a wavelet domain indicator of the local spatial activity. The proposed method is of low complexity, both in its implementation and execution time. The results demonstrate its usefulness for noise suppression in medical ultrasound and magnetic resonance imaging. In these applications, the proposed method clearly outperforms single-resolution spatially adaptive algorithms, in terms of quantitative performance measures as well as in terms of visual quality of the images.     

A logistic regression framework for information technology outsourcing lifecycle management

We present a methodology for managing outsourcing projects from the vendor's perspective, designed to maximize the value to both the vendor and its clients. The methodology is applicable across the outsourcing lifecycle, providing the capability to select and target new clients, manage the existing client portfolio and quantify the realized benefits to the client resulting from the outsourcing agreement. Specifically, we develop a statistical analysis framework to model client behavior at each stage of the outsourcing lifecycle, including: (1) a predictive model and tool for white space client targeting and selection—opportunity identification (2) a model and tool for client risk assessment and project portfolio management—client tracking, and (3) a systematic analysis of outsourcing results, impact analysis, to gain insights into potential benefits of IT outsourcing as a part of a successful management strategy. Our analysis is formulated in a logistic regression framework, modified to allow for non-linear input–output relationships, auxiliary variables, and small sample sizes. We provide examples to illustrate how the methodology has been successfully implemented for targeting, tracking, and assessing outsourcing clients within IBM global services division.Scope and purposeThe predominant literature on IT outsourcing often examines various aspects of vendor–client relationship, strategies for successful outsourcing from the client perspective, and key sources of risk to the client, generally ignoring the risk to the vendor. However, in the rapidly changing market, a significant share of risks and responsibilities falls on vendor, as outsourcing contracts are often renegotiated, providers replaced, or services brought back in house. With the transformation of outsourcing engagements, the risk on the vendor's side has increased substantially, driving the vendor's financial and business performance and eventually impacting the value delivery to the client. As a result, only well-ran vendor firms with robust processes and tools that allow identification and active management of risk at all stages of the outsourcing lifecycle are able to deliver value to the client. This paper presents a framework and methodology for managing a portfolio of outsourcing projects from the vendor's perspective, throughout the entire outsourcing lifecycle. We address three key stages of the outsourcing process: (1) opportunity identification and qualification (i.e. selection of the most likely new clients), (2) client portfolio risk management during engagement and delivery, and (3) quantification of benefits to the client throughout the life of the deal.     

Soil surface illumination at micro-relief scale and soil BRDF data collected by a hyperspectral camera

The results of the paper draw attention to the fact that the hyperspectral image of soil surface at micro-relief scale may display variation in the soil spectral shape due to illumination conditions of the surface. The image of an extremely rough cultivated soil surface, very deeply ploughed, was obtained by a hyperspectral camera, in the range of 0.4–1.0 μm with 0.67–0.74 nm spectral resolution. It was found that the soil reflectance spectra of the studied surface, illuminated by the direct sunbeams, are clearly convex with distinct absorption features. Furthermore, the soil normalized reflectance spectra were used to distinguish the subtlety of the analysed shaded soil spectra shape. They show that depressions caused by the absorption features of O₂ and H₂O, contained in the atmosphere above directly illuminated soil fragments, transform into peaks, if the same soil is deeply shaded.     

Approximating the average daily surface albedo with respect to soil roughness and latitude

The present study explores the diurnal variations in blue-sky albedo (α) of soils under clear sky conditions with respect to surface roughness. Three roughness levels of ploughed and unploughed soil surfaces, developed from the same loessial material, were examined. The relation between α of the surfaces and the solar zenith angle, determined during the experiment, enabled us to predict the diurnal α variation of the surfaces throughout the year at a given latitude, between 75° S and 75° N. The optimal time (T _O) for measuring the soil albedo by an instantaneous observation was considered as the best represented time for the daily averaged value within an error lower than ±2%. It was found that the T _O, falling at different times depending on the soil surface roughness, limits the possibilities of data achievement by remote-sensing satellites along one of their sun-synchronous orbits.     

Synthesis,modification, and porous properties of new glycidyl methacrylate copolymers

Synthesis, copolymerization, and physicochemical properties of new, of different degrees of crosslinker tetrafunctional bis[4(2‐hydroxy‐3‐methacryloyloxypropoxy)phenyl]sulfide and glycidyl methacrylate copolymers are presented. The monomers were used for the synthesis of porous microspheres in the presence of pore‐forming diluents, decan‐1‐ol, and toluene. Influence of diluents composition on their porous structures was studied. Porous structure of the obtained microspheres in dry (from nitrogen adsorption–desorption measurements) states was studied. Their chemical structures were studied by the use of Fourier transform infrared. The number of epoxy groups of the obtained copolymers, their thermal properties (thermogravimetric analysis), and swelling characteristics in 10 solvents of different chemical nature were examined. Selected copolymers were modified by amines in the epoxide ring‐opening reaction. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Load capacity of a thick-walled cylinder with a radial hole

The paper deals with elastic–plastic analysis of the stress–strain state in the vicinity of a hole in a thick-walled cylindrical pressure vessel. The investigations have been inspired by the phenomenon of ductile fracture observed in a high-pressure reactor. Using finite element calculations, different failure criteria are proposed to aid design and control of high-pressure vessels with piping attachments. They are compared with suggestions of American (ASME) and European (EN) standards. A simple shakedown analysis of the structure is also presented.     

The impact of drying and steaming processes on surface color changes of tension and normal beech wood

Abstract

Beech wood has a high frequency of defects such as red heartwood, reaction wood (tension wood). For the experimental measurements four logs without visible defects like red heartwood, which can noticeably affects the measurements' results were qualified. The drying medium temperature in the first phase of the process before the moisture content of the specimens fell below the FSP was maintained at 45?°C. Then, the temperature was gradually increased to the maximum value 65?°C. The results showed that different initial wood moisture content does not affect to final value of tension and normal wood. The colorimetric parameter L* was much higher for tension wood. After steaming, there were greater differences in the colorimetric parameters, respectively, a* and b*. After drying the difference of all colorimetric parameters between tension and normal wood was significantly less. The color changes were only noticed in the surface layers of specimens. Differences were small, and thus, the impact of the tension wood on the color changes was not confirmed. However, since the lightness of tension wood plays a key role for its visual detection, it may be adequate to only measure the lightness parameter (L*).