Evaporation processes of water molecules from graphene edge: DFT and MD study

The evaporation processes of water molecules adsorbed in the edge region of graphene have been investigated by means of direct MO–MD method. A large system composed of 29 water molecules and a graphene sheet (C₉₆H₂₄) was used as a model system. The edge carbon atom of graphene was terminated by hydrogen atom. The geometry optimization showed that the water molecules interact with the hydrogen atoms in the edge region of graphene. At low temperature (300 K), the water molecules were dissociated as water clusters from the graphene. On the other hand, in addition to the dissociation of water clusters, the isolated water molecule was also found as dissociation product at high temperature (500 K). The mechanism of water evaporation was discussed on the basis of theoretical results.     

PCR-RFLP identification of prohibited animal derived DNA in animal feed

A method for confirming identification of prohibited species tissue in animal feed has been developed on the basis of PCR-RFLP analysis. In Japan, to prevent the spread of BSE through animal feed, the use of animal protein in feed has been regulated. Species-specific PCR detection of prohibited species materials in feed has been used as one of a series of laboratory tests to ensure the proper implementation of the feed regulations. However, since the result of this PCR method is determined only by amplicon length, it is sometimes necessary to confirm whether or not the positive result is due to the effect of a non-specific reaction. For this purpose, DNA sequencing is the best way to confirm the test result but it is not suitable for routine analysis because of the required time and cost. In this study, we developed an easy and rapid method to confirm the species identification (mammals, ruminants and cattle) by using 4 restriction enzymes: SmlI, MboI, BlnI and Hpy188III. This PCR-RFLP method, which ensures identification of prohibited animal species in feed, is useful for enhancing the reliability of feed inspection for BSE prevention. This method will be added to the Official Methods of Feed Analysis.     

Sensitive and spatially multiplexed detection system based on dielectrophoretic manipulation of DNA-encoded particles used as immunoreactions platform

In this work, we designed a new immunodevice that combines competitive immunoreactions on the microparticles, accumulation of these particles by negative dielectrophoresis (n-DEP), and their subsequent capture through hybridization among single-stranded DNAs (ssDNAs). Two widely used pesticides, atrazine and bromopropylate, were used as target molecules to test the resulting simultaneous detection system. For sensing, we prepared two different sets of microparticles: one modified with atrazine-conjugated bovine serum albumin (BSA-2d) and ssDNA-J1(up) and the other with bromopropylate-conjugated aminodextran (AD-155) and ssDNA-J2(up). The microparticles were incubated in a mixture of analyte-specific antibody and analyte at different concentrations to trap the unreacted antibodies prior to being labeled with antibodies conjugated with a fluorescence molecule. A suspension containing both types of microparticles was introduced into an n-DEP device consisting of an interdigitated microarray (IDA) electrode and channel modified with ssDNA-J1(down) and ssDNA-J2(down), which are complementary to ssDNA-J1(up) and ssDNA-J2(up), respectively. The n-DEP force generated by applying AC voltage to the IDA electrode displaced the microparticles toward the encoded areas, causing them to rapidly accumulate on the upper surfaces. Hybridization allowed us to distinguish the microparticles and sense multiple analytes by spatial recognition in the DNA-encoded areas. The fluorescence intensity of the captured particles, which depends on analyte concentrations, was measured selectively by focusing on specific areas. The strategy is advantageous for sensitivity due to the equivalent trapping efficiency by DNA hybridization and large surface area of the microparticle for immunoreactions. The rapidity and simplicity were still supported by particle manipulation. Using this concept, we detect atrazine and bromopropylate simultaneously with limits of detection (LODs) of 0.2 μg·L(-1), which covered the maximum residue level (MRL) in food samples established the European Union (EU) and Japan Ministry of Health, Labor and Welfare (MHLW).     

Detection of surface antigens on living cells through incorporation of immunorecognition into the distinct positioning of cells with positive and negative dielectrophoresis

Rapid determination of surface antigens on cells is possible by immobilization of cells accumulated by positive dielectrophoresis (p-DEP) via effective surface immunoreactions and removal of unbound cells by negative DEP (n-DEP). The DEP device for cell manipulation comprises a microfluidic channel with an upper indium tin oxide (ITO) electrode and a lower ITO microband array electrode (band electrode) modified with an antibody. Cells with the surface antigen introduced into the channel immediately accumulated on the surface of the band electrode during p-DEP generated by the application of ac voltage between the ITO electrode and the band electrode to immobilize by the specific antibody. The removal of accumulated cells to the gap region during n-DEP was used for rapid estimation of the residual cells with a specific surface antigen. We demonstrate here that human promyelocytic leukemia cells with the surface antigen CD33 can be captured on a band electrode modified with anti-CD33 antibody. The time required for the determination of the surface antigen using this compelled accumulation of cells by p-DEP and the separation of unbound cells by n-DEP is decreased to 60 s compared to that required by a cell binding assay using microtiter plates (30 min). Furthermore, the present method for a novel cell binding assay does not require pretreatment such as target labeling or washing of unbound cells and thereby enhancing throughput in the clinic and in cytobiology studies.     

Crack growth characteristics of carbon nanotube-based polymer composites subjected to cyclic loading

This paper presents the characterization of crack growth in carbon nanotube (CNT)-based polymer composites under fatigue loading. Fatigue crack growth tests were performed on single-edge cracked plate specimens of CNT/polycarbonate composites at room temperature and liquid nitrogen temperature (77 K). An elastic–plastic finite element analysis was also conducted to determine the J-integral range. The crack growth rate data were expressed in terms of the J-integral range, and the effect of nanotube addition on the fatigue crack growth behavior was examined. In addition, possible mechanisms of the crack growth in the nanocomposites are discussed based on microscopic observations of the specimen fracture surfaces.     

A Simple Pneumatic Loading System Controlling Stress and Strain Rates for One-Dimensional Compression of Clay

A simple but automated pneumatic loading system that can control the stress and strain rates for one-dimensional (1D) compression of clay was developed. The rate-dependency of stress-strain behaviour due to the viscous property of clay was investigated by 1D compression tests on standard-size specimens by various loading methods: 1) Standard Consolidation Tests (SCTs), stepwise increasing the axial stress two times every one day; 2) ordinary Constant-Rate-of-Strain (CRS) tests at different strain rates; 3) special CRS tests including unloading and reloading cycles with different stress amplitudes at strain rates of which the absolute value was either kept constant throughout respective tests or changed at the start of reloading; and 4) special CRS tests including a number of sustained loading (SL) during otherwise primary loading or unloading or reloading at constant strain rate. Sufficiently low strain rates were employed to ensure essentially fully drained condition. The followings were found. Despite that the newly developed pneumatic loading system is rather simple, 1D compression tests following such various loading histories as above can be performed on four types of clay rather accurately. The stress-strain behaviour of clay is significantly rate-dependent, exhibiting significant creep strains at SL stages. The creep strain rate is significantly different whether SL starts during otherwise primary loading or unloading or reloading, controlled by the magnitude and sign of the initial strain rate at the start of SL. The whole observed trends of rate-dependent stress-strain behaviour can be qualitatively explained by the non-linear three-component elasto-viscoplastic model extended to cyclic loading conditions.     

Photooxidative degradation of polyethylene containing flame retardants by monochromatic light

Photodegradation of incombustible polymer materials [high-density (HD) and low-density (LD) polyethylene (PE) containing 0.5 to 2.0 phr of decabromodiphenyl ether (DBDE) or tetrabromobisphenol A (TBA) as a flame retardant] were studied using an Okazaki Large Spectrograph (OLS). Samples were irradiated in air at 23°C with monochromatic light of wavelengths at 260, 280, 300, 320, 340, and 360 nm. Ultraviolet and Fourier transform infrared (FTIR) spectra were taken to estimate the chemical changes caused by photoirradiation. Molecular weight change was followed by gel permeation chromatography (GPC) measurements. It was found that the photostability of PE samples was reduced by the addition of flame retardants. The threshold wavelengths of photodegradation are 320 nm and 360 nm for PE–TBA samples and PE–DBDE samples, respectively. Main-chain scission is favored when the irradiation was carried out with the light of wavelength 300 nm for HDPE–DBDE and HDPE–TBA samples. The most effective irradiation wavelengths for crosslinking are found to be 300 nm and 280 nm for LDPE–DBDE and LDPE–TBA samples, respectively. 1995 John Wiley & Sons, Inc.     

Synthesis of N-Doped ZnO by grinding and subsequent heating ZnO-urea mixture

Synthesis of nitrogen (N) doped zinc oxide (ZnO) has been attempted by a serial operation of co-grinding the mixture of ZnO and urea (CO(NH₂)₂), followed by calcining the ground product at 400 °C. The prepared ZnO sample has been characterized by X-ray diffraction (XRD) analysis, infrared spectroscopy (IR), Raman spectroscopy. All spectra from these techniques are completely different from those of the hand ground mixture sample, confirming the mechanochemical effect of N-doping. The prepared N-doped ZnO sample exhibits light absorbance in the visible light wavelength region, and has high photo-catalytic ability in an anti-bacterial test.     

Rate Effects on the Stress-Strain Behaviour of Eps Geofoam

The rate-dependency of the stress-strain behavior of EPS (Expanded Polystyrene) geofoam with densities of 19.3 and 28.0 kg/m³ was investigated by performing unconventional unconfined compression tests. A set of monotonic loading (ML) tests were performed at different constant values of vertical (axial) strain rate, ε_v. The ε_v value was stepwise changed many times and several sustained loading (SL) tests were performed during otherwise ML at a constant ε_v in other tests. A number of SL tests were performed during global unload and reload cycles to infer the stress-strain relation when ε_v=0. The elastic properties were evaluated by applying minute unload/reload cycles during otherwise ML. The rate-dependent stress-strain behaviour observed in these tests was described by an elasto-viscoplastic model (i.e., a non-linear three-component model), for which the vertical (axial) stress, σ_v, consists of inviscid and viscous components, σ_v^f and σ_v^v, while ε_v consists of elastic and irreversible components, ε_v^e and ε_v^ir. It is shown that the viscous property of EPS geofoam is of Isotach type in that, under the loading conditions where ε_v^ir is always positive, the current σ_v^v value is a unique function of instantaneous ε_v^ir and ε_v^ir, therefore the strength increases with ε_v. This viscous property was quantified based on the test results and incorporated into the model. The rate-dependent stress-strain behaviour, including the creep behaviour, observed in the experiment is simulated very well by the proposed model. In particular, the fact that the creep strain becomes significant when the sustained σ_v value becomes larger than the inviscid yield vertical stress is well simulated.