Simultaneous cross-linking of CD6 and CD28 induces cell proliferation in resting T cells

In the present study, we showed that simultaneous ligation of the monoclonal antibodies (mAb) against CD6 and CD28 induces T-cell proliferation in purified resting T lymphocytes in the absence of T-cell receptor (TCR) occupancy. No cell proliferation was observed when the mAb were cross-linked alone or used simultaneously in the soluble form. T-cell proliferation mediated through CD6/CD28 is accompanied by the up-regulation of interleukin-2 (IL-2) mRNA and expression of IL-2 receptors on the cell surface. In the presence of IL-2-neutralizing mAb the proliferative response of the T cell induced through CD6/CD28 was inhibited dose dependently. Cross-linking mAb to CD6 and CD28 alone or together did not down-regulate the CD3/TCR complex. T-cell proliferation mediated through CD6/CD28 was only partially blocked by the immunosuppressive drug, cyclosporin A (CsA), whereas anti-CD28-induced T-cell proliferation in the presence of the phorbol ester, 12-O-tetradecanoylphorbol-13-acetate (TPA), was unaffected. In sharp contrast T-cell proliferation mediated by anti-CD6 in the presence of TPA was efficiently blocked by CsA. In addition, two protein kinase C (PKC) inhibitors, GF 109203X and H-7 dose-dependently inhibited T-cell proliferation mediated through CD6/CD28, suggesting that PKC activation may be involved. Furthermore, there was a marked differential dose-dependent inhibitory effect of the PKC inhibitors on T-cell proliferation mediated by the co-ligation of anti-CD6 or anti-CD28 in the presence of anti-CD3, with the former being more sensitive to PKC inhibition. Taken collectively, our results suggest that T-cell activation can occur through an antigen-independent pathway by cross-linking the accessory molecules, CD6 and CD28, and that these two cell surface antigens may have distinct signalling pathways.     

Risk factors associated with incisor injury in elementary school children

This study examined risk factors associated with incisor injury in 3396 third and fourth grade school children in Alachua County, Florida. One of six orthodontists completed a standardized examination form for each child to assess severity of incisor injury, gender, age, race, skeletal relationships, morphologic malocclusion, incisor exposure, interlabial gap, TMJ sounds, chin trauma, and history of lower facial trauma. One in five (19.2%) exhibited some degree of incisor injury. This was limited to a single tooth in 73.1% of those with injury, while enamel injury predominated (89.4%). The majority of the injuries (75.4%) were localized in the maxillary arch, with central incisors the most frequently traumatized. Chi-square tests of association indicated that gender, race, school, orthodontist, history of lower facial trauma, chin trauma, profile, and maxillary and mandibular horizontal positions were associated with incisor injury (P < 0.05). Wilcoxon rank sum tests identified differences in age, overjet, time of screening, and interlabial gap between those with and without injury (P < 0.05). Results of logistic regression analyses indicated risk of incisor injury was greater for children who had a prognathic maxilla, a history of trauma, were older, were male, and had greater overjet and mandibular anterior spacing.     

Differences in risk factors for being either a hepatitis B carrier or anti-hepatitis C+ in a hepatoma-hyperendemic area in rural Taiwan

This is a study of the differences in the risk factors for being either hepatitis B surface antigen positive [HBsAg(+)] or antibody to hepatitis C virus positive [Anti-HCV(+)] in A-Lein, a rural area in southern Taiwan, an area which also has a high hepatoma mortality rate. Three hundred eighty-five patients age > or =40 years participated in hepatoma screening at the A-Lein Community Health Center during 1995. Those who were HBsAg(-) and anti-HCV(-) or had coinfection of HBsAg(+) and anti-HCV(+) were excluded, leaving 293 patients: 109 HBsAg(+) and 184 anti-HCV(+). The anti-HCV(+) patients had a lower socioeconomic status (as defined by level of education and type of occupation) and were older than HBsAg(+) patients (P < 0.05). Those with higher alanine aminotransferase levels (ALT) also had a higher anti-HCV(+) to HBsAg(+) odds ratio (OR), and a dose response relationship was found, P < 0.0001. Anti-HCV(+) patients were more likely than HBsAg(+) patients to have a spouse who shared the infection, OR = 5.11; 95% CI, 2.30-11.28. Anti-HCV(+) patients were more likely than HBsAg(+) patients to have had blood transfusions (OR = 2.66; 95% CI, 1.20-5.89), frequent medical injections (OR = 2.64; 95% CI, 1.62-4.31), or injections by non-licensed medical providers (OR = 1.91; 95% CI, 1.18-3.09). Multiple logistic regression analysis showed that the significant factors for anti-HCV(+) patients vs. HBsAg(+) patients are drinking habit (OR = 3.45; 95% CI, 1.02-11.60), age (OR = 6.33; 95% CI, 2.93-13.68), and frequent medical injections (OR = 2.88; 95% CI, 1.65-5.03). The transmission of hepatitis C in A-Lein is closely related to low socioeconomic status, age, alcohol abuse, spouses being anti-HCV(+), and frequent medical injections, especially from non-licensed medical providers, including both pharmacists and those with no medical licensing whatsoever. These nonlicensed medical providers sometimes reuse needles to save money, which is a likely route of infection.     

An integrated intelligent machining system for axisymmetric parts using PC-based CAD and CAM software packages

Machining process planning involves the formation of a set of directions describing the machining operations required to transform raw stock into a finished part. Conventional process planning, performed manually, relies on the knowledge and competence of an experienced process planner and tends to be time consuming and error prone. In the past two decades, much effort has been spent on improving process planning by utilizing the power of a computer to emulate the capabilities of an experienced planner. During the same period, computer-aided design (CAD) and computer-aided manufacturing (CAM) software has been developed to enhance design productivity and to assist the NC code generation facets of the machining process. The entire planning process may be automated be integrating CAD and CAM using computer-aided process planing (CAPP). The research described in this paper outlines the design and development of an intelligent CAPP system integrating two commercial CAD and CAM software packages, Autocad and Mastercam.     

Is urine leukocyte esterase test a useful screening method to predict Chlamydia trachomatis infection in women?

We evaluated the use of the leukocyte esterase test (LET) on first-catch urine specimens from women as a screening test to predict infection with Chlamydia trachomatis. For diagnosis, we used Abbott's ligase chain reaction (LCR) on urine specimens and isolation by tissue culture (TC) on cervical brushes. Of 4,053 women attending sexually transmitted disease and family planning clinics, 4.3% (n = 174) were positive by TC and 5.9% (n = 239) were positive by LCR. When LET was compared to TC, the sensitivity, specificity, positive predictive value, and negative predictive value were 54.0, 67.0, 6.8, and 97.0%, respectively. The corresponding performance of LET versus LCR was 53.1, 67.3, 10.1, and 95.8%. Almost half of the laboratory-confirmed chlamydial infections were negative by LET. The low specificity probably reflects multiple causes of pyuria in women and results in a low positive predictive value. LET is neither sensitive nor specific as a predictor of chlamydial infection and cannot be recommended for use as a screening test for C. trachomatis with first-catch urine samples from females from low- or moderate-prevalence populations.     

Usefulness and limitations of thyrotropin measurements as a first-line test for follow-up of Graves'' patients

Although the good appearance and biocompatibility of dental porcelains, failures are still of considerable concern because of the limited properties to all ceramic system. Physical properties that might be considered ideal include high strength, resistance to abrasion, and resistance to the hostile oral environment. Porcelain has been considered by many of its physical characteristic are similar to those of enamel. In 1983 a new modality of treatment, the etched porcelain restoration was introduced by Simonsen and Calamia. Numerous investigations have shown the strength of the etched porcelain bonded to composite resin and also the clinical success of this porcelain to be used as laminated veneers and etched inlays and onlays.     

Hydrolysis of tetracalcium phosphate in H3PO4 and KH2PO4

The activity product of tetracalcium phosphate (TTCP, Ca₄(PO₄)₂O), was determined at 37°C, and the hydrolysis of TTCP was investigated in 0.01–0.1 mol l^–1 H₃PO₄ and KH₂PO₄ solutions by means of calcium and phosphorus analyses, X-ray diffraction and infrared analysis. The activity product, defined as K _sp=(Ca²⁺)⁴ (PO ₄ ^3– )² (OH^–)², was 37.36 as pK _sp, which was smaller than that previously reported (42.4). TTCP easily hydrolysed to form calcium-deficient apatite (Ca-def OHAp, Ca_5–x (HPO₄) _x (PO₄)_3–x (OH)_1–x ), or dicalcium phosphate dihydrate (DCPD, CaHPO₄2H₂O), depending on the initial phosphate concentration. With 0.1 mol l^–1 H₃PO₄, TTCP hydrolysed to form DCPD within several minutes. In 0.025 mol l^–1 H₃PO₄ and 0.1 mol l^–1 KH₂PO₄, TTCP hydrolysed to form Ca-def OHAp through DCPD. In the latter solution, a small amount of octacalcium phosphate (OCP, Ca₈(H₂PO₄)₂(PO₄)₄5H₂O), was detected as an intermediate product. In 0.025 mol l^–1 KH₂PO₄, TTCP hydrolysed directly to form Ca-def OHAp. In 0.01 mol l^–1 H₃PO₄, hydrolysis of TTCP was not completed, although Ca-def OHAp was only a product. Thus the final product and the degree of hydrolysis depended on the pH and the overall Ca/P ratio in the reaction system. The rate of Ca-def OHAp formation seemed to be controlled by the dissolution rate of TTCP rather than the crystallization rate of the OHAp.     

Comparative hall measurements on wet- and dry-oxidized 4H-SiC MOSFETs

Hall measurements have been used to compare the properties of 4H-SiC inversion-mode MOSFETs with “wet” and “dry” gate oxides. While the field-effect mobilities were approximately 3–5 cm²/Vs, the Hall mobilities in 4H-SiC MOSFETs in the wet and dry oxide samples were approximately 70–80 cm²/Vs. The dry-oxidized metal oxide semiconductor field effect transistors (MOSFETs) had a higher transconductance, improved threshold voltage, improved subthreshold slope, and a higher inversion carrier concentration compared to the wet-oxidized MOSFETs. The difference in characteristics between the wet- and the dry-oxidized MOSFETs is attributed to the larger fixed oxide charge in the dry oxide sample and a higher interface trap density in the wet oxide sample.     

Performance evaluation of a multichannel transceiver system forADSL and VHDSL services

The authors study the performance of a multichannel modulation method for asymmetric digital subscriber lines (ADSLs) and very high-speed digital subscriber lines (VHDSLs). In the ADSL case, over all unloaded North American subscriber lines in the test set, a unidirectional 1.536 Mb/s data rate service from the end office to the customer premises is possible on a single twisted pair at an error rate of 10^-7 with at least a 6 dB margin used coded multichannel modulation with sufficient transmit power. In the VHDSL case, data rates in excess of 100 Mb/s can be transmitted reliably, at an error rate of 10^-7, using uncoded multichannel modulation on a single twisted pair over a distance ⩽150 ft with a sufficiently high sampling rate (≈24 MHz) and transmit power. It is shown that a cost-effective multichannel transceiver design suggested for high-speed digital subscriber line (HDSL) service will also work well for ADSL and VHDSL services with only minimal modifications