New type of pressurized cultivation method providing oxygen for piezotolerant yeast

For efficient oxygen supply to pressurized culture, we developed a method using a highly pressurized membrane reactor with an air-saturated medium circulation system. The new method increased the cell growth of aerobic yeast approximately 20 folds larger than that in the case of using a conventional method.     

Synthesis of bis(2,4-diphenylbutyl) phthalate and its application as a plasticizer for poly(vinyl chloride) from waste polystyrene

Bis(2,4-diphenylbutyl) phathalate, a plasticizer for poly(vinyl chloride) (PVC), was synthesized from 2,4-diphenyl-1-butene obtained by a thermal decomposition under reduced pressure of waster polystyrene. The heat stability of bis(2,4-diphenylbutyl) phthalate was determined by thermogravimetric analysis and compared with typical plasticizers. It was recognized that bis(2,4-diphenylbutyl) phthalate showed high heat resistant. A test sheet of plasticized PVC with bis(2,4-diphenylbutyl) phthalate and bis(2-ethylhexyl) phthalate was prepared. The test sheet was used for determination of the plasticizing performance of bis(2,4-diphenylbutyl) phthalate. Although the effect of bis(2,4-diphenylbutyl) phthalate imparting flexibility to PVC is poorer than that of bis(2-ethylehexyl) phthalate, the former phthalate is well compatible with PVC and exceedingly heat-resistant.     

Comparative characterisation of dioxane-soluble lignins released by ball milling and by sheep digestion from forage grasses

Faecal soluble lignin (FSL), extracted from the faeces of sheep that received orchardgrass and timothy, were compared with 90% dioxane-soluble lignins released by ball milling (MHL) and by subsequent enzymatic hydrolysis (EHL) from the same grasses. FSL contained much less carbohydrate and esterified p-coumaric and ferulic acids than MHL and EHL. Although no considerable differences were found in the yields of vanillin and syringaldehyde produced by nitrobenzene oxidation, the molar ratio of syringaldehyde to vanillin was higher for FSL than for MHL and EHL. Such differences in chemical properties among the lignin preparations were confirmed by ¹³C-NMR spectroscopy. FSL had a lower molecular size compared with MHL and EHL. Results indicated that syringyl-rich lignin fragments with less phenolic acid esters, probably depolymerisation products of the grass lignins, were released by digestion in sheep from the forage grasses.     

PACAP-mediated sperm-cumulus cell interaction promotes fertilization

The developing acrosome in spermatids contains pituitary adenylate cyclase-activating polypeptide (PACAP). However, the role of the acrosomal PACAP remains unclear because it has not been detected in mature spermatids and sperm. We reinvestigated whether the sperm acrosome contains PACAP. An antiserum produced against PACAP reacted to the anterior acrosome in epididymal sperm fixed under mild conditions, suggesting that PACAP acts on oocytes and/or cumulus cells at the site of fertilization. Immunolabeling and RT-PCR demonstrated the presence of PACAP type I receptor, a PACAP-specific receptor, in postovulatory cumulus cells. To investigate the role of PACAP in fertilization, we pretreated cumulus-oocyte complexes with the polypeptide. At a low concentration of sperm, the fertilization rate was significantly enhanced by PACAP in a dose-dependent manner. Sperm penetration through the oocyte investment, cumulus layer, and zona pellucida was also enhanced by PACAP. The enhancement was probably due to an enhancement in sperm motility and the zona-induced acrosome reaction, which were stimulated by a cumulus cell-releasing factor. Indeed, PACAP treatment increased the secretion of progesterone from the cumulus-oocyte complexes. These results strongly suggest that in response to PACAP, cumulus cells release a soluble factor that probably stimulates sperm motility and the acrosome reaction, thereby promoting fertilization.     

Inhibitory effect of high concentrations of ferric ions on the activity of Acidithiobacillus ferrooxidans

The influence of high concentrations of ferric ions on the biochemical activity of Acidithiobacillus ferrooxidans was studied using intact cells. The specific oxidation rate of ferrous ions decreased with increasing ferric ion concentration. Lineweaver-Burk plots revealed typical competitive inhibition kinetics, because the slopes varied with the ferric ion concentration. A linear relationship between the slope and the square of the ferric ion concentration revealed that the iron-oxidizing enzyme system of A. ferrooxidans was competitively inhibited by about two molecules of ferric ion. The kinetic equation based on this inhibition model agreed with the experimental observation at a high ferric ion concentration where the bacterium is usually exposed in bioleaching and biooxidation plants.     

Polysulfide reduction using sulfate-reducing bacteria in a photocatalytic hydrogen generation system

A hydrogen generation process using photocatalytic reactions has been proposed. In this process, hydrogen sulfide is a source of hydrogen and is turned into polysulfide. In order to establish the cyclic operation of a photocatalytic hydrogen generation system, it is necessary to convert polysulfide back into hydrogen sulfide with a small energy input. This paper proposes the use of sulfate-reducing bacteria (SRB) for the regeneration of hydrogen sulfide. Batch cultivation of natural source SRB samples were carried out using a culture medium containing polysulfide as the only sulfur compound source. SRB produced hydrogen sulfide from several kinds of polysulfide sources, including a photocatalytic hydrogen generation-produces solution. Production lag phase and production rate of hydrogen sulfide were affected by initial polysulfide concentration. SRB activity was inhibited at high initial polysulfide concentrations. SRB enrichment culture T2, exhibited the highest hydrogen sulfide production rate, and was able to utilize several kinds of organic matter as the electron donor. The results suggest the possibility of using large biomass sources, such as sewage sludge and the raw garbage in a hydrogen generation system. We developed speculative estimates that an SRB based hydrogen generation system is feasible.     

High-melt-strength polypropylene with electron beam irradiation in the presence of polyfunctional monomers

High-melt-strength polypropylene (PP) was achieved with irradiation by an electron beam generated from an accelerator in the presence of polyfunctional monomers (PFM). Among 16 PFMs, the relatively shorter molecular chain bifunctional monomers such as 1,4-butanediol diacrylate (BDDA) and 1,6-hexanediol diacrylate (HDDA) were the most effective for enhancing the melt strength of PP. The concentration and dose of the HDDA to obtain the high melt strength PP in irradiation under nitrogen gas atmosphere were 1.5 mmol/100 g PP and 1 kGy, respectively. DSC measurement and dynamic mechanical analysis showed that the thermal behavior of the high-melt-strength PP was different from that of the original PP. Crystallinity and crystallization temperature during cooling after heating were lower and higher in high melt strength PP than original PP, respectively. Elongational viscosity at 180°C of the high-melt-strength PP showed a remarkable increase at a certain elongational time with constant strain rate, demonstrating the typical property of high-melt-strength samples. This implies that a few higher molecular chains of PP, formed by intermolecular combination of its chain by HDDA in irradiation, give higher melt strength to induce entanglement of molecular chains. © 1996 John Wiley & Sons, Inc.     

Irradiation effects of boron carbide used as control rod elements in fast breeder reactors

The paper describes radiation effects on 8₄C pellets used as control rod elements in the Enrico Fermi Fast Breeder Reactor. Pellet swelling (Δ$\text{V/V}$) caused by irradiation was less than 1% in which crystal lattice swelling was less than 20%. Many microcracks, a main cause of pellet swelling, appeared in the irradiated pellets. The production of microcracks was related to graphite precipitation in the pellets before irradiation. Open pores which did not exist in the unirradiated pellets were formed in the irradiated ones. In a unit cell of B₄C, the α-axis elongated by 0.025 Å and the $\text{c-}\text{axis}$ shrank by 0.07 Å by irradiation. Moreover, we found three recovery stages which were from room temperature to 400°C, from 400 to 750°C and from 850 to 1100°C. The recovery mechanisms in the irradiated pellets are discussed in terms of the helium behavior.     

Macrocytic anemia with anisocytosis due to alcohol abuse and vitamin B6 deficiency

The effect of the choice of maternal age-specific prevalence curve on the model predicted Down syndrome detection rate was examined. All 19 published regression curves from 11 birth prevalence series in four meta-analyses were included. The detection rate for a five per cent false-positive rate was estimated for three combinations of markers. For free beta human chorionic gonadotropin and alpha-fetoprotein the lowest predicted detection rate was 62.3 per cent and the highest 64.1 per cent, a range of 1.8 per cent. When unconjugated oestriol was added as a third marker it was 65.6-67.3 per cent, a 1.7 per cent range, and when inhibin A was the fourth marker the detection rate was 72.0-73.4 per cent, a 1.4 per cent range. The number of series included in the regression had the biggest effect: when the authors had used a subset thought to have the highest ascertainment the predicted detection rate generally increased. The type of regression equation used and restrictions on the age range over which the regression was performed were less important factors. The effect of the choice of curve on the predicted increase in detection achieved by incorporating additional markers was relatively small: 3.1-3.3 per cent for unconjugated oestriol and a further 6.1-6.5 per cent for inhibin A. This analysis shows that the model inaccuracy caused by the maternal age curve is not small but is unlikely to be large enough to influence Down syndrome screening policy decisions.     

Relationship between local structure and stability in hen egg white lysozyme mutant with alanine substituted for glycine

We prepared five mutant lysozymes in which glycines whose dihedralangles are located in the region of the left-handed helix, Gly49,Gly67, Gly71, Gly102 and Gly117, were mutated to an alanineresidue. From analyses of their thermal stabilities using differentialscanning calorimetry, most of them were more destabilized thanthe native lysozyme, except for the G102A mutant, which hasa stability similar to that of the native lysozyme at pH 2.7.As for the destabilized mutant lysozymes, their X-ray crystallographicanalyses showed that their global structures did not changebut that the local structures changed slightly. By examiningthe dihedral angles at the mutation sites based on X-ray crystallographicresults, it was found that the dihedral angles at these mutationsites tended to adopt favorable values in a Ramachandran plotand that the extent and direction of their shifts from the originalvalue had similar tendencies. Therefore, the change in dihedralangles may be the cause of the slight local structural changesaround the mutation site. On the other hand, regarding the mutationof G102A, the global structure was almost identical with thatof the native structure but the local structure was drasticallychanged. Therefore, it was suggested that the drastic localconformational change might be effective in releasing the unfavorableinteraction of the native state at the mutation site.