Reduction of the pump power threshold in the nonlinear all-optical photonic crystal directional coupler switches

In this paper, the cross-phase modulation Kerr nonlinear effect is utilized to induce nonlinearity and a change in the coupling length by a high-intensity pump signal in the nonlinear photonic crystal directional coupler. We have analyzed and modified the nonlinear square-lattice directional couplers for the first time, to the best of our knowledge, and have improved the power consumption for inducing the nonlinear switching. We have shown that according to the slower group velocity and the increased confinement of the TM modes with lower frequency in the region with a higher dielectric constant in a square lattice, the required switching pump power of the structure is less than that of the same triangular structure.     

A novel system for the production of pure hydrogen from natural gas based on solid oxide fuel cell–solid oxide electrolyzer

In this paper, a novel process for the production of pure hydrogen from natural gas based on the integration of solid oxide fuel cells (SOFCs) and solid oxide electrolyzer cells (SOECs) is presented. In this configuration, the SOFC is fed by natural gas and provides electricity and heat to the SOEC, which carries out the separation of steam into hydrogen and oxygen. Depending on the system layout considered, the oxygen available at the SOEC anode outlet can be either mixed with the SOFC cathode stream in order to improve the SOFC performance or regarded as a co-product. Two configurations of the cell stack are studied. The first consists of a stack with the same number of SOFCs and SOECs working at the same current density. In this case, since in typical operating conditions the voltage delivered by the SOFC is lower than the one required by the SOEC, the required additional power is supplied by means of an electric grid connection. In the second case, the electricity balance is compensated by providing additional SOFCs to the stack, which are fed by a supplementary natural gas feed. Simulations carried out with Aspen Plus show that pure hydrogen can be produced with a natural gas to hydrogen LHV-efficiency that is about twice the value of a typical water electrolyzer and comparable to that of medium-scale reformers.     

Experimental investigation of effect of palmitic acid as inhibitor on particle size of asphaltenes flocs using imaging techniques

In this article, the effect of one well-known inhibitor namely palmitic acid is investigated on particle size distribution of asphaltenes by imaging techniques. Pure asphaltene is extracted from crude oil to prepare Heptol (n-heptane+toluene) solutions of suspended asphaltenes. Different concentrations of inhibitors are then added to the solution. Afterward, image analysis of microscopic photos is used to determine the particle size distribution of asphaltene flocs in the presence of inhibitors. Average particle size of asphaltene and fractal structure of aggregates are also investigated; results show that the compaction of asphaltenes flocs is correlated with concentration of inhibitor. However, no significant relationship was observed between surface roughness of flocs and inhibitor concentration.     

Improving of Corrosion Behavior of Al 7075 by Applied Titania–<Emphasis Type="Italic">Benzotriazole</Emphasis> Nanostructured Coating with Sol Gel Method

Nowadays, self-healing coatings display high abrasion resistance and bond strength. Application of these coatings are reckoned the most common and the most economic method for restoration and protection against corrosion by which metal structures durability is enhanced. The major role of a self-healing hybrid coating in corrosion inhibition is to supply materials for controlling types of corrosion. In this paper, titania–Benzotriazole nanostructured coating has been applied to substrate Al 7075 by using the sol–gel process and immersion method. The bonds existing in the hybrid coating, structure and morphology and coating corrosion behavior have been studied using Fourier transform infrared spectroscopy (FTIR), GIXRD, atomic force microscopy (AFM), field emission scanning electron microscopy (FESEM) and impedance electrochemical test, respectively. The obtained results are indicative of generating a homogeneous, uniform, crack-free titania–Benzotriazole nanostructured coating associated with excellent optimization of corrosion resistance at 2.8% Benzotriazole.     

Design factors affecting the dynamic performance of soil suspension in an agitated,baffled tank

The effects of particle size, impeller clearance and impel er speed are assessed to show how condition variations influence power consumption in the water-solid slurry suspension in an agitated tank. The energy efficiency of slurry height variation, impel er type and diameter, and solid movement speed has been investigated with six soil series stirred in a soil-water slurry. Coarser sand particles are observed to significantly increase power consumption, while finer particles, for instance clay, decrease the stirring power requirement. The 3-blade HR100 SUPERMIX? impeller manufactured by SATAKE general y performs more efficiently than a conventional 4-pitched blade turbine. The impeller's geometric design, including diameter and number of blades influences the impeller's energy efficiency, and HR100 impellers with greater diameters remarkably reduce power consumption. The tests demonstrated that the power required to provide off-bottom solid suspension and solid dispersion can be reduced dramatically by increasing the slurry height rather than by accelerating the impel er, if this option is possible.     

Electrochemical sensor for selective determination of N-acetylcysteine in the presence of folic acid using a modified carbon nanotube paste electrode

In the present paper, a novel benzoylferrocene (BF) modified carbon nanotube paste electrode (BFCNPE) was prepared. The modified electrode was further used for the successful determination of N-acetylcysteine (NAC), and it showed an excellent electrocatalytic oxidation activity toward NAC with a lower overvoltage, pronounced current response, and good sensitivity. Under the optimized experimental conditions, the proposed electrochemical NAC sensor exhibited a linear calibration plot that ranged from 3.0 × 10^? 7 to 7.0 × 10^? 4 M with a detection limit of 9.0 × 10^? 8 M. Also, Square wave voltammetry (SWV) was used for simultaneous determination of NAC and folic acid (FA) at the modified electrode. Finally, the proposed method was applied to the determination of NAC in NAC tablets.     

Non-dominated ranked genetic algorithm for a multi-objective mixed-model assembly line sequencing problem

The increasing market demand for product variety forces manufacturers to design mixed-model assembly lines (MMAL) on which a variety of product models similar to product characteristics are assembled. This paper presents a method combining the new ranked based roulette wheel selection algorithm with Pareto-based population ranking algorithm, named non-dominated ranking genetic algorithm (NRGA) to a just-in-time (JIT) sequencing problem when two objectives are considered simultaneously. The two objectives are minimisation the number of setups and variation of production rates. This type of problem is NP-hard. Various operators and parameters of the proposed algorithm are reviewed to calibrate the algorithm by means of the Taguchi method. The solutions obtained via NRGA are compared against solutions obtained via total enumeration (TE) scheme in small problems and also against four other search heuristics in small, medium and large problems. Experimental results show that the proposed algorithm is competitive with these other algorithms in terms of quality and diversity of solutions.     

Facial expression recognition by using differential geometric features

ABSTRACT

In recent years, a growing interest has been created for improvement of human interaction with computers. Hence, automatic recognition of facial expressions has become one of the active research topics. The purpose of this paper is to identify facial expressions, by using differential geometric features. In the proposed method, only the first and last images are used and differential features are extracted from these two images. Differential geometric features are extracted from changes in the important points of the face in the two images. In this method, the distance between the important points of the face and the reference point was calculated in both directions x and y, for two images, and with the difference between the distance, the differential geometric features between the two images were obtained. Based on the results, with this method, recognition accuracy of six facial expressions in the database was 96.44%, CK +.     

Statistical analysis of the performance of a bi-functional catalyst under operating conditions of LPDME process

Liquid phase direct synthesis of dimethyl ether (LPDME™) under various operating conditions (temperature, H₂/CO molar ratio of feed) was conducted in a mechanically agitated slurry reactor system. Each run was monitored for 60 h time on stream (TOS) in order to confirm the high activity and long-term stability of a bi-functional catalytic system (CuO–ZnO–Al₂O₃/H-MFI-90). Statistical experimental design was applied for determining the optimum operating conditions under which the catalytic system shows the highest performance. A significant improvement in the performance of the bi-functional catalyst was observed when the temperature and H₂/CO molar ratio of feed were increased from 200 to 240 °C and 1 to 2, respectively at a constant pressure of 35 bar and GHSV equal to 1100 mLn/(g-cat h). CO conversion was increased from 9.1 mol% at T = 200 °C and H₂/CO = 1 to 79.6 mol% at T = 240 °C and H₂/CO = 2 and the yield and selectivity of DME also increased from 7.11% to 47.05% and 41.57% to 59.96%, (molar basis) respectively. No significant deactivation has been observed during 60 h TOS at different operating conditions. Furthermore, from the main effect plots and response table results, it was concluded that the most effective factor on activity and stability of bi-functional catalytic system is temperature.     

A nickel hexacyanoferrate and poly(1-naphthol) hybrid film modified electrode used in the selective electroanalysis of dopamine

A mixed-valent nickel hexacyanoferrate and poly(1-naphthol) hybrid (NiHCF–PNH) film was prepared on a gold (Au) electrode by a galvanostatic method, which led to stable and homogeneous hybrid film. The film was characterized using scanning electronic microscopy, cyclic voltammetry, and electrochemical impedance spectroscopy. This electrode showed excellent catalytic properties toward dopamine (DA) detection, using cyclic voltammetry and differential pulse voltammetry methods. The electrocatalytic oxidations of DA at different electrodes, such as a bare Au electrode or a poly(1-naphthol)/Au-, or NiHCF–PNH/Au-modified electrode, were investigated in a phosphate buffer solution (pH 7). Interestingly, the NiHCF–PNH-modified electrode facilitated the oxidation of DA, but it did not responded to other electroactive biomolecules, such as ascorbic acid and uric acid_. The DA electrochemical sensor exhibited a linear response from 0.1 to 4.3 μM (R² = 0.9984) and from 4.3 to 9.6 μM (R² = 0.9969), with a detection limit of 2.1 × 10^?8 M, and a short response time (3 s) for DA determination. In addition, the NiHCF–PNH-modified electrode exhibited distinct advantages by its simple preparation, specificity, and stability.