Effect of modified single‐wall carbon nanotubes on mechanical and morphological properties of thermoplastic elastomer nanocomposites based on (polyamide 6)/(acrylonitrile butadiene rubber)

Thermoplastic elastomer nanocomposites based on acrylonitrile butadiene rubber (NBR) and polyamide 6 (PA6), with acid functionalized single‐wall carbon nanotubes (SWNT), were prepared via a direct melt‐mixing process in an internal mixer. The influence of SWNT content (0, 0.5, 1, 1.5) on morphological properties of PA6/NBR with different ratios (80/20, 70/30, 60/40) were then investigated. Characterization of nanocomposites was conducted by using transmission electron microscopy, scanning electron microscopy, differential scanning calorimetry, and mechanical properties. Scanning electron microscopy micrographs proved the droplet‐matrix blend morphology in which the size of NBR droplets decreased as the SWNT loading increased, suggesting dispersion of SWNT in the PA6 phase. It was further proved by transmission electron microscopy images, showing homogenous dispersion of SWNT in the PA6 phase. Differential scanning calorimetry results showed a slightly reduced percentage of crystallinity in samples containing SWNT. The mechanical properties of nanocomposites indicated an enhancement in tensile strength, modulus, and hardness on increasing SWNT content. J. VINYL ADDIT. TECHNOL., 22:336–341, 2016. © 2014 Society of Plastics Engineers     

Encapsulation of nano Disperse Red 60 via modified miniemulsion polymerization. I. Preparation and characterization

Nanocolorant, nano Disperse Red 60, was successfully prepared via modified miniemulsion polymerization process. Transmission electron microscopy was employed to determine the droplet and particle sizes. The effects of the speed and the time of homogenization, the surfactant nature and its amount, the presence of dye, the initiator nature, and the presence of a crosslinker on the morphology and particle size of nanocolorant were studied. UV–vis absorption spectra of nanocolorant with respect to the commercial corresponding dye showed a hypsochromic shift confirming the decrease in particle size. Fourier transform infrared spectra proved the chemical composition of nanocolorant particles assisting the incorporation of the dye within the polystyrene particles. The monomer conversion, surface tension, and apparent sedimentation stability also were measured. The relative electrical conductivity of the suspension was used for determining the polymerization mechanism. The kinetic polymerization was investigated using a pseudofirst-order and it is found that the rate constant of polymerization equals 0.01358 min⁻¹. Zeta potential measurements were employed for miniemulsion which showed that it has good stability at all range of pH. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Comment on 'Active simulation of grounded inductors with CCII+ s and grounded passive elements'

This comment shows that circuits for active simulation of grounded inductors with plus-type second-generation current-conveyors (CCII + s) and grounded passive elements can be systematically derived from Sedra-Smith gyrator realization. In addition to the available realizations, new circuit topologies are presented. Some of the new topologies can yield inductance forms which are not realizable using the available topologies. Also, a new topology for realizing pure inductance without recourse to element matching conditions is presented.     

Treatment of Checkerboard Pressure in the Collocated Unstructured Finite-Volume Scheme

In this article, a new concept, “local triangle,” is described. A smoother pressure field is then obtained through the utilization of local triangles in a multiblock local triangulation method. The cell face velocity is corrected with a pressure-correction term which is usually underrelaxed. It is demonstrated that this relaxation factor has to be one, and it cannot be the general relaxation factor. It is indicated that the checkerboard oscillations are more significant at higher cell Reynolds numbers and, in turn, in this article, numerical simulations are mainly performed in turbulent flow.     

Heart rate variability in low birth weight growth restricted children during sleep and wake stages

Intrauterine growth restricted (IUGR) individuals have greater predisposition to develop a metabolic syndrome in later life manifesting itself as obesity, hypertension, type 2 diabetes or cardiovascular disease. Poor fetal growth may alter the regularity mechanism of cardiac autonomic system that is involved in the development of these diseases. The malfunctioning of the cardiac autonomic system assessed by decrease in heart rate variability (HRV) is associated with negative cardiovascular outcomes. This study is aimed at investigating the risk of development of coronary heart disease in IUGR children in later life. For that purpose HRV analysis of normal and growth restricted children was performed during sleep and wake stages. The study group consisted of 9–10 years old, 32 normal, 20 low birth weight IUGR children. The standard time domain HRV metrics (mean RR, SDNN, RMSSD, NN50 and pNN50) and Poincaré indices (SD₁ and SD₂) were used to analyse and compare the RR-interval time series of these groups. The IUGR children showed lower HRV as compared with normal children during both sleep and wake stages. The significantly decreased HRV during sleep provide an evidence of autonomic derangement that may be associated with higher risk of lethal arrhythmias in the IUGR children in later life.     

Large signal analysis of the SiGe HBT translinear harmonic mixer

Analytical expressions are obtained for the amplitudes of the desired output components of a SiGe translinear harmonic mixer excited by large-amplitude local oscillator and radio-frequency signals. Comparison with previously published calculated and simulated results is included.     

Experimental study of remaining creep life of SA-304L stainless steel using small punch creep test

In this paper, the remaining creep life of SA-304L stainless steel at elevated temperatures is studied. The small punch creep tests (SPCT) were performed on SA-304L virgin and aged materials at constant loads. Times to fracture and the minimum deflection rate in SPCTs were recorded, and the time-temperature parametric analysis was performed, based on experimental results. The constants of the Larson–Miller parameter and the Monkman–Grant relationship were obtained for different consumed creep life ratios, and eventually the equations were established to explain the variation of constants of the Larson–Miller parameter and the Monkman-Grant relationship with respect to the consumed creep life ratio.     

Objectification theory and deaf cultural identity attitudes: Roles in deaf women's eating disorder symptomatology.

This study examined the generalizability of direct and mediated links posited in objectification theory among internalization of sociocultural standards of beauty, body surveillance, body shame, and eating disorder symptoms with a sample of Deaf women. The study also examined the role of marginal Deaf cultural identity attitudes within this framework. Data from 177 Deaf women indicated positive relations among internalization, body surveillance, body shame, and eating disorder symptomatology. Consistent with tenets of objectification theory, body shame mediated the links of internalization and body surveillance with eating disorder symptoms. In addition, marginal Deaf identity attitudes (but not hearing, immersion, or bicultural attitudes) were linked uniquely with eating disorder constructs and had significant indirect relations through internalization with body surveillance, body shame, and eating disorder symptoms. Implications for practice and future research are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)