Predicting Tensile Properties of Friction-Stir-Welded 6063 Aluminum with Experimentally Measured Welding Heat Input

This work aims to develop a reliable method to predict mechanical properties of friction-stir-welded 6 xxx-series alloys with experimentally measured welding heat input. A calorimetrical method was utilized to experimentally measure the welding heat input in the friction stir welded of aluminum alloy 6063-T5. Good correlations between the input variables, i.e., welding parameters and physical properties of the materials, and the welding heat inputs obtained with experimental measurements were discovered. The welding heat input can be predicted using the empirical equation derived based on these correlations. Moreover, the results suggested that the thermal conductivities of the welded alloys affected the welding heat input significantly. Mechanical properties, including hardness and tensile properties, of friction-stir-welded aluminum alloy 6063 were in good correlation to the heat input obtained with experimental measurement. These correlations were explained by the evolution of the strengthening precipitates during welding. This work proposed a reliable new route to predict these mechanical responses through the estimation of heat input.     

Simple cellular automaton‐based simulation of ink behaviour and its application to Suibokuga‐like 3D rendering of trees

Suibokuga is a style of monochrome painting characterized by the use of Chinese black ink (sumi), a complex interaction between brush, ink and paper, and such visual features as Noutan (shade), Kasure (scratchiness), and Nijimi (blur). In this paper we present a simple behavioural model of water and ink particles based on a 2D cellular automaton computational model, and its application to a Suibokuga‐like rendering of 3D trees. Copyright © 1999 John Wiley & Sons, Ltd.     

Influence of electrical conditions on performance of electrical discharge machining with powder suspended in working oil for titanium carbide deposition process

This paper describes the influence of the discharge current and the pulse duration on the titanium carbide (TiC) deposition process by electrical discharge machining (EDM) with titanium (Ti) powder suspended in working oil. Although the influence of the electrical conditions for removal EDM has been investigated, the criteria for deposition have not been discussed. In the experiments, a 1-mm copper rod was used for an electrode to prevent the flushing of working oil from the gap between the electrode and a workpiece. Ti powder reacted with the cracked carbon from the working oil, then depositing a TiC layer on a workpiece surface. A major criterion of the deposition or removal was the discharge energy over a pulse duration of 10 μs. A thickness of the TiC layer became the maximum at a certain discharge current and pulse duration. Larger discharge energy and power promoted the removal by heat and pressure caused by the discharge. The removal was classified further into two patterns; cracks were observed on the Ti-rich surface in removal pattern 1 and a workpiece was simply removed in removal pattern 2. The maximum hardness of the deposition was 2000 Hv. The workpiece about 10 μm beneath its surface was also hardened because of the dispersion of TiC. The machining conditions for the hardest deposition did not coincide with those for the highest one. Therefore, the discharge current and pulse duration should be optimized for the deposition.     

Characteristics of Nonequilibrium Plasma Flow and Its Sterilization Efficacy in a Tube at Atmospheric Pressure

A nonequilibrium plasma flow produced uniformly in a tube was developed in this paper. The plasma was generated in polyvinyl chloride tube, 3 mm in inner diameter and 100 mm in length, between a wire electrode, 0.2 mm in diameter, and a grounded flat electrode located at the bottom of the tube. We investigated the spectrum, temperature, and ozone concentration of this plasma flow and its sterilization efficacy against Geobacillus stearothermophilus. The temperature in the tube showed uniformity along the wire electrode and increases as applied voltage was increased. With a wire electrode temperature of 337 K at a peak-to-peak applied voltage of 10 kV_pp in the sine wave and a frequency of 6 kHz, sterilization of 10⁵ cells was obtained. This result suggests the potential of the application of plasma flow rather than ethylene oxide for sterilization of the inner wall of tubes, such as catheters and artificial blood vessels.     

MiR-7-5p Is Involved in Ferroptosis Signaling and Radioresistance Thru the Generation of ROS in Radioresistant HeLa and SAS Cell Lines

In cancer therapy, radioresistance or chemoresistance cells are major problems. We established clinically relevant radioresistant (CRR) cells that can survive over 30 days after 2 Gy/day X-ray exposures. These cells also show resistance to anticancer agents and hydrogen peroxide (H₂O₂). We have previously demonstrated that all the CRR cells examined had up-regulated miR-7-5p and after miR-7-5p knockdown, they lost radioresistance. However, the mechanism of losing radioresistance remains to be elucidated. Therefore, we investigated the role of miR-7-5p in radioresistance by knockdown of miR-7-5p using CRR cells. As a result, knockdown of miR-7-5p increased reactive oxygen species (ROS), mitochondrial membrane potential, and intracellular Fe²⁺ amount. Furthermore, miR-7-5p knockdown results in the down-regulation of the iron storage gene expression such as ferritin, up-regulation of the ferroptosis marker ALOX12 gene expression, and increases of Liperfluo amount. H₂O₂ treatment after ALOX12 overexpression led to the enhancement of intracellular H₂O₂ amount and lipid peroxidation. By contrast, miR-7-5p knockdown seemed not to be involved in COX-2 and glycolysis signaling but affected the morphology of CRR cells. These results indicate that miR-7-5p control radioresistance via ROS generation that leads to ferroptosis.     

Electrically tunable lens based on a dual-frequency nematic liquid crystal

We report on an electrically controlled liquid-crystal-based variable optical lens filled with a dual-frequency nematic material. The lens design employs a hole-patterned electrode structure in a flat nematic cell. In order to decrease the lens switching time we maximize the dielectric torque by using a dual-frequency nematic material that is aligned at an angle approximately 45 degrees with respect to the bounding plates by obliquely deposited SiO(x), and by using an overdrive scheme of electrical switching. Depending on the frequency of the applied field, the director realigns either toward the homeotropic state (perpendicular to the substrates) or toward the planar state (parallel to the substrates), which allows one to control not only the absolute value of the focal length but also its sign. Optical performance of the liquid-crystal lens is close to that of an ideal thin lens.     

Specific affinity extraction method for small molecule-binding proteins

Validation of the targets of candidate drugs is critical for rapid and efficient drug discovery and development and for understanding the pharmacological action and potential toxicities of the prospective therapeutic agent. Due to the nonspecific binding of abundant proteins to small molecule-immobilized gels, it is difficult to identify the protein targets of small molecules from crude biological samples by affinity extraction. To address this problem, we have developed an affinity gel for the specific extraction of small molecule-binding proteins. We immobilized small molecules on the agarose gel through a disulfide linker that is cleavable by mild reduction. This system has allowed specific and noncovalent complex formation between the small molecule and the target protein, keeping the effect of the nonspecific abundant proteins adsorbed on both the linker and gel surface to minimum. By preparing this affinity matrix with deoxycholate as a model small molecule, we captured two independent deoxycholate-binding proteins of different affinities from mouse ascites, anti-deoxycholate antibody, and serum albumin. As other proteins were not captured, this affinity extraction method should contribute significantly to the accurate and rapid drug discovery and development.