Study on dominant mechanism of high-cycle fatigue life in 6061-T6 aluminum alloy through microanalyses of microstructurally small cracks

The mechanism controlling the fatigue life of a precipitation-hardened Al–Mg–Si alloy (6061-T6) at a high-cycle fatigue (HCF) regime of over 10⁷ cycles was investigated in detail. It was found that over 90% of the total fatigue life was occupied by the growth process of a microstructurally small crack at relatively low stress amplitude. The small crack was often found to be arrested and halted for a long period (more than 10⁶ cycles) before it began to grow again, which resulted in a significantly slow growth process. The small crack was then analyzed not only by the conventional fractography but also by the cross-sectional observation of the crack tip region using a focused ion beam and transmission electron microscopy. These observations, supplemented also by a grain orientation analysis using electron backscattered diffraction, explicitly revealed the following points: (i) the small crack growth observed on the specimen surface is primarily related to facet-type cracking that occurs exclusively at the specimen surface; (ii) the growth direction of the small crack has strong anisotropy (i.e. surface-induced growth); (iii) the facet-type cracking is related to the formation of persistent fine slip bands that accompany no structural change of the matrix. On the basis of these results, the micromechanism of small crack growth and its relation to the concept of fatigue limit at the HCF regime is discussed in detail.     

Development of fabrication process for Ag/polydiacetylene (core/shell) hybridized nanocrystals

Core/shell hybridized nanocrystals composed of Ag nanoparticle core and polydiacetylene shell were fabricated successfully by means of “co-reprecipitation/microwave irradiation method”. The hybridized nanocrystals were characterized using transmission electron microscopy (TEM) observation and UV–vis absorption spectroscopy. UV–vis spectral measurements revealed that polydiacetylene shell was the red phase while π-conjugated backbone is distorted. Detailed mechanism of formation of the red phase was discussed.     

Synthesis of soluble poly(9,10-dihydrophenanthrene-2,7-diyl)s. A new class of luminescent poly(p-phenylene)s with ethylene type bridges

Poly(9,10-dihydrophenanthrene-2,7-diyl)s with -OSi(R)₂(R′) groups at the 9,10-positions were synthesized by dehalogenative polycondensation of the corresponding monomers by using a zerovalent nickel complex. They showed number average molecular weights (M_n's) of 9800-69,000 and high quantum yields (62%-quantitative) in photoluminescence. Palladium catalyzed copolymerization of 2,7-dibromo-9,10-dihydrophenanthrene having -OCH₃ or -OSi(R)₂(R′) groups at the 9,10-positions with diethynyl- or diboronic-aromatic compounds also gave photoluminescent polymers with high quantum yields.     

Development of a new loading test apparatus for microfocus X-ray CT and its application to the investigation of soil behavior surrounding driven open-section piles

In recent years, X-ray CT scanners with task-specific modifications, such as microfocus and/or a synchrotron, have been widely implemented in a variety of fields, including medical and industrial fields. Since microfocus X-ray CT systems enable the visualization of whole samples, and also yield a relatively high resolution of the region of interest in the sample, they are commonly utilized in the fields of soil mechanics and geotechnical engineering. This paper describes a novel loading test apparatus that is specifically designed for microfocus X-ray CT systems capable of performing loading tests to investigate soil behavior during the installation of driven open-section piles. The loading tests were designed to take the micro-level spatial resolution of microfocus X-ray CT systems into account. Digital image correlation (DIC) is subsequently implemented to analyze the obtained CT images, making it possible for measurements to be taken of the displacement fields in the ground following installation of the model pile. Finally, the versatility of this novel test apparatus is proof of its high potential for application in different types of loading tests.     

Liposome‐Based in Vitro Evolution of Aminoacyl‐tRNA Synthetase for Enhanced Pyrrolysine Derivative Incorporation

Methanosarcina species pyrrolysyl‐tRNA synthetase (PylRS) attaches Pyl to its cognate amber suppressor tRNA. The introduction of two mutations (Y384F and Y306A) into PylRS was previously shown to generate a mutant, designated LysZ‐RS, that was able to attach N‐benzyloxycarbonyl‐L ‐lysine (LysZ) to its cognate tRNA. Despite the potential of LysZ derivatives, further LysZ‐RS engineering has not been performed; consequently, we aimed to generate LysZ‐RS mutants with improved LysZ incorporation activity through in vitro directed evolution. Using a liposome‐based in vitro compartmentalization (IVC) approach, we screened a randomly mutagenized gene library of LysZ‐RS and obtained a mutant that showed increased LysZ incorporation activity both in vitro and in vivo. The ease and high flexibility of liposome‐based IVC should enable the evolution of not only LysZ‐RS that can attach various LysZ derivatives but also of other enzymes involved in protein translation.     

Improving the photovoltaic performance of co‐evaporated Cu2ZnSnS4 thin‐film solar cells by incorporation of sodium from NaF layers

We have investigated the influence of sodium (Na) on the properties of co‐evaporated Cu₂ZnSnS₄ (CZTS) layer microstructures and solar cells. The photovoltaic performance and diode properties were improved by incorporating Na from NaF layers into the CZTS layers, while Na had a negligible effect on the microstructural properties of the layer. The best cell fabricated by using an optimal CZTS layer (Cu/(Zn + Sn) = 0.70, Zn/Sn = 1.8) yielded an active area efficiency of 5.23%. The analysis of device properties suggests that charge‐carrier recombination at CZTS/CdS interface is suppressed by intentional Na incorporation from NaF layers. Copyright © 2016 John Wiley & Sons, Ltd.     

Synthesis and photoinduced surface relief grating formation of novel photo-responsive amorphous molecular materials, 4-[bis(9,9-dimethylfluoren-2-yl)amino]-4′-cyanoazobenzene and 4-[bis(9,9-dimethylfluoren-2-yl)-amino]-4′-nitroazobenzene

Novel azobenzene-based photo-responsive amorphous molecular materials, 4-[bis(9,9-dimethylfluoren-2-yl)amino]-4′-cyanoazobenzene and 4-[bis(9,9-dimethylfluoren-2-yl)amino]-4′-nitroazobenzene, have been synthesized and the formation of surface relief grating on their amorphous films has been investigated. It was found that a relatively large surface relief grating could be inscribed on both amorphous films upon interference exposure to the writing laser beams. The modulation depth of the surface relief grating inscribed on the amorphous film of the cyano-substituted material was found to be larger than that inscribed on the film of the nitro-substituted one and seemed to be comparable to that inscribed on the amorphous film of the parent material, 4-[bis(9,9-dimethylfluoren-2-yl)amino]azobenzene. These results were discussed from the viewpoint of their trans–cis photoisomerizations as amorphous films and glass-transition temperatures.     

CSD-controlled reactive crystallization of SrSO4 in the presence of polyethylenimine

Reactive crystallization of SrSO₄ was performed in the presence of polyethylenimine (PEI) using a double-jet crystallizer. PEI dosage suggested important dependence on crystal size distributions (CSDs) leading to obtain micron-sized crystals with mono-dispersed distribution. A plausible role of PEI was considered to be a multiple inhibitor of growth, continuous nucleation and agglomeration. PEI might be an effective polyelectrolyte additive for the production of mono-dispersed fine crystals.     

Control of Snow Falling Flow around NACA0015 Blade using a Plasma Electrode with Weather Resistant Design

The plasma actuation (PA) effect on the snow falling flow was investigated using a plasma electrode with weather resistant design and the natural snow wind facility of the Hokkaido University of Science. NACA0015 test blade with chord length c of 300 mm was used. Wind tunnel tests were carried out under the angle of the attack of the blade was fixed at 15 degrees, and the main flow velocity is U=5 m/s. PIV (Particle image velocimetry) measurements were conducted on various PA conditions using natural dry snowflakes as a tracer. When the actuator was driven under the condition of the fundamental frequency of F=50 kHz, and the pulsed modulated frequency f of fc/U=1 and Duty ratio (Ratio of plasma ON time to pulse duration time) =1%, movement of snowflakes was controlled the most effectively tested. It was clarified that the fundamental frequency of PA also affects the control of snow flow. Under snowfall conditions, the weather resistant designed plasma electrode has suffered no damage and operated successfully.     

Proton-conducting electrolyte membranes based on hyperbranched polymer with a sulfonic acid group for high-temperature fuel cells

The hyperbranched polymers (HBP-SA-Acs) with both a sulfonic acid group as a functional group and an acryloyl group as a cross-linker at terminals in different ratios of sulfonic acid group/acryloyl group (SO₃H/Ac) were successfully synthesized as a new thermally stable proton-conducting electrolyte. The cross-linked hyperbranched polymer electrolyte membranes (CL-HBP-SAs) were prepared by thermal polymerizations of the HBP-SA-Acs using benzoyl peroxide, and their ionic conductivities under dry condition and thermal properties were investigated. The ionic conductivities of the CL-HBP-SAs were found to be in the range of 2.2 × 10⁻⁴ to 3.3 × 10⁻⁶ S/cm, depending upon the SO₃H unit contents, at 150 °C under dry condition, and showed the Vogel-Tamman-Fulcher (VTF) type temperature dependence, indicating that proton transfer is cooperated by local polymer chain motion. All CL-HBP-SAs were thermally stable up to 260 °C, and they had suitable thermal stability as electrolyte membranes for the high-temperature fuel cells under dry condition. Fuel cell measurement using a single membrane electrode assembly cell with a cross-linked electrolyte membrane was successfully performed under non-humidified condition. It was demonstrated that applying the concept of dry polymer system to proton conduction is one possible approach toward high-temperature fuel cells.