熔融石英耐火材料

阐述了熔融石英耐火材料的主要性能与应用领域。     

T.C.Powcrs模型若干问题的研究

从T.C.Powers水泥石模型出发,提出了描述水泥混凝土材料初始结构的主要参数是初始孔隙率。由此池绎了水泥浆体组成与结构的定量关系,比原模型有更明了的物理意义,研究结果表明,Powers模型在高孔隙率范围内具有适用性,但不适用于低孔隙率硬化水泥浆体,且在低孔隙率条件下不存在28％的固有凝胶孔隙率,水化产物成份和性质是渐变的。     

MgO／Ni系梯度功能材料的设计与制备

对ＭｇＯ／Ｎｉ系梯度功能材料（ＦＧＭ），分别用实验和微观力学模型测定和计算了用于热应力缓和设计的各物性参数。讨论了两种结果之间存在差异的原因。用有限元方法模拟了制备过程中ＦＧＭ的热应力，得到ＭｇＯ／Ｎｉ系ＦＧＭ的综合设计准则。按设计结果进一步调整粉末工艺性质，成功地烧制出ＭｇＯ／Ｎｉ系ＦＧＭ。     

CaSO_4晶须对聚氨酯胶粘剂性能影响的研究

用实验室自制的相对分子质量为2500的聚己二酸-1,4-丁二醇酯二醇和甲苯二异氰酸酯、混合扩链剂配制聚氨酯胶粘剂,并使用实验室自制的改性和未改性200nm硫酸钙晶须对聚氨酯胶粘剂进行改性,考察不同硫酸钙晶须及其加入量、加入方式对聚氨酯胶粘剂综合力学性能的影响。根据实验结果,200nm改性硫酸钙晶须当加入量为3％时,聚氨酯胶粘剂的拉伸强度、初粘性和最终剥离强度均有明显提高。     

Two possible emission mechanisms involved in the arc discharge method of carbon nanotube preparation

By investigating the morphologies and microstructures of the cathode deposits prepared by self-sustained arc discharge between graphite rods, we consider that there are two electron emission mechanisms occurring on the cathode: field emission and thermionic emission. The former occurs mainly on the edge of the growing surface, by which we can explain the formation of the outer hard shell of the cathode deposit; while the latter occurs mainly on the growing surface except for the edge area and it is the main cause for the growth of carbon nanotubes.     

无机颜料的表面处理

介绍了无机颜料表面处理的作用及实现途径,并对其作用机理进行了分析,还叙述了表面活性剂的选择和处理方式。     

Electrochemical micromachining of nitinol by confined-etchant-layer technique

The confined etchant layer technique has been applied to fabricate complex three-dimensional microstructures on nitinol for the first time. HF and HNO₃ were locally and simultaneously electrogenerated at the mold surface to etch a nitinol workpiece. NaOH was used as an efficient scavenger to confine the etchant close to the mold. Cyclic voltammetry was employed to study the electrochemical behavior of a Pt electrode in the etching solution in order to choose an appropriate potential for etchant generation on the mold. The thickness of the confined etchant layer was estimated to be several micrometers by inspecting the deviation of the sizes of the etched spots from the sizes of those on the microelectrode. Thus, the composition of the electrolyte could be optimized for better etching precision. By optimizing the composition of the electrolyte, complex microstructures on a Pt-Ir mold bearing the logo “XMU” of Xiamen University were successfully fabricated on nitinol. The etched patterns were approximately negative copies of the mold, and the precision of duplication could easily reach the micrometer scale.     

货架喷塑前处理工艺的选择与应用

介绍了CZ99-03(7)常温锌系磷化剂在货架上的应用,根据货架构件的特点,优化货架喷塑前处理工艺,讨论了影响磷化质量的工艺因素,提出了提高磷化效果的措施以及进一步改进磷化工艺的工艺设计。     

探索行动导向教学法在网络架构课程教学改革中的应用

技工学校是以技术型人才培养为目的的学生能力养成和技能操作的教育基地,为确保人才培养质量,学校需要加强对市场形势的把握和教学改革的控制。行动导向教学法是目前广泛应用于技校和职校教学课堂的、有较好实际作用的教学方法,文章以行动导向教学法为重点,以配置交换机实现VLAN学习任务为案例,在教学方法和手段等几个方面讨论了行动导向教学法在网络架构课程教学改革中的研究与实践。     

广角摄像机在机器人视觉定位中的应用

为了保证广角摄像机在现代机器人视觉定位应用中的准确性,以广角摄像机像素坐标的反畸变过程为研究对象,提出一种在畸变对应表的基础上使用中心迭代法以及区域插值法确定物体实际位置的方法。通过实验证明了该方法能够测量物体的位置,其精度能够满足工业使用要求。