Heavy-ion microbeam system for cell irradiation at Kyoto University

We have developed a heavy-ion microbeam system for cell irradiation that uses an 8-MV tandem Van de Graaff accelerator at Kyoto University. Using a pair of apertures as the final collimator, microbeams of carbon, fluorine, and silicon were extracted to the atmosphere with few background particles. We used a thin transmission scintillator and a photomultiplier detector to accurately measure the number of extracted particles. To examine beam spreading, the beam profile was measured by observing tracks of an irradiated CR-39 track detector. The two disks with holes which were added to the collimating apertures reduced background radiation due to secondary X-rays and electrons from the apertures.     

Potential of fermentation byproducts as nitrogen supplements for lactating dairy cows

Two feeding trials evaluated several byproducts from commercial amino acid fermentations as N supplements for lactating cows. Trial 1 was a replicated 5 x 5 Latin square that used 2-wk periods and 25 Holstein cows (five with ruminal cannulae) fed diets containing [dry matter (DM) basis] 28% alfalfa silage, 31% corn silage, 28% high moisture ear corn plus 4 percentage units of crude protein (CP) from: soybean meal, urea, commercial fermentation byproduct 1 or 2, or a blend of fermentation byproducts plus wheat middlings. Diets averaged 15.1% CP and 32% neutral detergent fiber. Intake of DM, body weight (BW) gain, and yield of milk and milk components were greatest for cows fed soybean meal; animal performance was similar with urea, byproduct 1 and the byproduct blend. Intake, BW change, and yield of milk and protein when cows were fed byproduct 2 were lower than when fed urea. Urine output (estimated with creatinine in spot urine samples) was greater on fermentation byproduct 1 and the byproduct blend. There were no differences due to N source in microbial synthesis (based on estimated purine derivative excretion), in situ digestion of alfalfa hay DM, or molar proportions of ruminal volatile fatty acids. Trial 2 was a replicated 5 x 5 Latin square using 2-wk periods and 10 Holstein cows fed diets containing (DM basis) 37% alfalfa silage, 28% corn silage, 29% high moisture ear corn plus 2 percentage units of CP from urea, fermentation byproduct 1, or one of three blends of fermentation byproducts plus wheat middlings. Except for greater DM intake in cows fed the byproduct blends, performance and urinary metabolite excretion did not differ because of N supplement. Relative to other fermentation byproducts and urea, byproduct 1 resulted in reduced milk urea N in both trials. Under the conditions of these trials, fermentation byproducts were less effective than soybean meal, and no more effective than urea, as N supplements.     

Immunochromatography for the rapid determination of cadmium concentrations in wheat grain and eggplant

BACKGROUND: A simple and quick on‐site test for trace levels of cadmium (Cd) in food is needed because of the human toxicity of this heavy metal. We developed an immunochromatography kit which uses the antigen‐antibody complex reaction between the Cd–ethylenediaminetetraacetic acid (Cd–EDTA) complex and an anti‐Cd–EDTA antibody. We previously reported the successful use of this kit to determine Cd concentrations in brown rice with respect to the international standard: 0.4 mg kg^?1. Here, we measured, using this immunochromatography kit, Cd concentrations in crops with lower international standards than rice. RESULTS: Cadmium extracted with 0.1 mol L^?1 HCl from wheat grain and fresh eggplant was purified sufficiently using an ion‐exchange column treatment. Appropriate HCl extraction rates and dilution rates for the column eluate were selected; Cd concentrations in wheat grain and fresh eggplant were determined successfully by immunochromatography with respect to the international standards of 0.2 mg kg^?1 and 0.05 mg kg^?1 fresh weight, respectively. CONCLUSION: Approximate Cd concentrations in wheat grain and fresh eggplant can be monitored easily and quickly by this method at locations where facilities for acid digestion and precision analysis are not available. Copyright © 2011 Society of Chemical Industry     

A study of the photolightening mechanism of blond hair with visible and ultraviolet light

In this study the photolightening behavior of blond hair was investigated. The results demonstrated that visible (VIS) and ultraviolet (UV) light lighten blond hair through different mechanisms. VIS light was found to contribute much more to the lightening of blond hair than UV light, and acted directly, while UV light only lightened blond hair that had been washed following irradiation. VIS and UV light both, however, lightened to a similar degree isolated melanin granules and decomposed melanin granules that were exposed on a cross section of blond hair. These results indicate that melanin granules are equally sensitive to both forms of light while blond hair is most sensitive to VIS light. The results also indicate that hair tissues, excluding melanin granules, are damaged by UV light but not by VIS light. Based on these facts, the hypothetical lightening mechanism of UV light is assumed to be that UV light preferentially attacks and damages hair tissues rather than melanin granules. This occurs only after the hair is washed, as the washing process removes the melanin granules that effuse from loose hair fibers. In contrast, VIS light preferentially attacks and decomposes the melanin granules rather than other tissues, and also results in the lightening of blond hair but without the need for subsequent washing. We also found that while VIS light destroys the structure of isolated melanin granules, UV light does not act in a similar manner. Consequently, it is proven that VIS and UV light attack different sites of the melanin granule, even though the lightening rates from both light sources are similar.     

Effects of water chemistry and loading conditions on stress corrosion cracking of cold-rolled 316NG stainless steel in high temperature water

The effects of electrode potential, stress intensity factor and loading history on stress corrosion cracking growth of a cold-rolled 316NG stainless steel in 288 °C pure water were investigated. Crack branching and intergranular stress corrosion cracking along random grain boundaries were observed by electron-back scattering diffraction. A strong dependence of crack growth rate on stress intensity factor is observed. A single-cycle overloading produced a retarded transient cracking growth period. The mild inhibiting effect of decreasing electrode potential on crack growth of cold-rolled 316NG SS is analyzed based on the interaction between crack tip mechanics and crack tip oxidation kinetics.     

Solid-state recycling of aluminium alloy swarf through cold profile extrusion and cold rolling

In this study, the possibility of solid-state recycling of aluminium alloy machining swarf using cold extrusion and a subsequent cold rolling process is investigated. Cast Al-Si alloy swarf was cold compacted into billets and successfully profile-extruded into square bars with a rectangular cross-sectional aspect ratio of 1:1.8 under an extrusion ratio of 4 or more. After annealing, the extruded bars underwent multi-pass cold rolling into 1-mm thick strips with a total rolling reduction of 85%. Optical microscopy demonstrated that in material recycled using only an extrusion process, coarse residual voids existed in regions where insufficient plastic strain was introduced, causing a visible expansion of the material during heat treatment. However, uniaxial tensile tests showed that extrusion-recycled material had a higher mechanical strength than the original aluminium alloy, implying sufficient bonding among the individual pieces of machining swarf. It was also found that the strength and density of material recycled through extrusion and an additional rolling process were superior to material recycled using extrusion only. Moreover, it was observed that the ductility of the recycled materials was inferior to that of the original aluminium alloy.     

Influences of debonding rate and temperature on tack properties and peel behavior of polyacrylic block copolymer/tackifier system

The influences of debonding rate and temperature on the peel behavior of polyacrylic block copolymer/tackifier system were investigated. Poly(methyl methacrylate)-block-poly(n-butyl acrylate)-block-poly(methyl methacrylate) triblock copolymer (MAM) with hard block contents of 23 (MAM-23) and 16 wt.% (MAM-16) and a 1/1 blend with a diblock copolymer (MA) consisting of the same components (MAM-23/MA, total hard block content of 15 wt.%) were used as the base polymer. A special rosin ester was used as a tackifier at various contents in the block copolymer/tackifier system. The peeling process at the probe/adhesive interface during probe tack testing was observed using a high-speed microscope at 23 °C with debonding rate of 10 mm/s. Three different peeling mechanisms were observed. Type A, where peeling progressed linearly from the edge to the center of the probe without cavitation (MAM-23). Type B, where peeling progressed linearly from the edge to the center of the probe with cavitation (MAM-16). Type C, where cavitation occurred over the entire adhesive layer, and peeling initiation was delayed (MAM-23/MA). The peel behavior of MAM-23 changed from Type A to Type B with a decrease of the debonding rate (1 mm/s) or increase of the temperature (40 °C). In contrast, there was no change for MAM-16 and MAM-23/MA. Cavity formation in an adhesive layer restrains peeling; therefore, it is desirable for improvement of the adhesion strength. The tack properties increased with the tackifier content, and the formation of cavitation was less than that for the systems without the tackifier.     

Development of monitoring technique for the confirmation of spent fuel integrity during storage

A method is developed to monitor integrity of spent fuels stored in a canister that is sealed by weld. To achieve the monitoring, Kr-85 gas was newly adopted as a kind of probe. In the case of a fuel rod defect, Kr-85 gas of the fuel rod is leaked in the canister. By detection of gamma ray (514 keV) emitted from Kr-85 outside of the canister, defected rods can be detected without unsealing the canister. The monitoring technique was developed using small-scaled mock-up experiments and simulated calculation. The result showed that Kr-85 gas leakage of about 10¹¹ Bq is detectable under the noise gamma rays by using the detection system with collimator, which is about 10% of Kr-85 inventory in a fuel rod. Therefore, this monitoring technique is considered as an inspection method prior to transportation of spent fuel from an interim storage facility to a reprocessing plant.     

Effects of electron irradiation on SiGe devices

The degradation and the recovery behavior of the device performance for SiGe diodes and p-MOSFETs irradiated by 2-MeV electrons are reported. For diodes, it is noted that both the reverse and forward current increase by irradiation. An interesting observation is that the forward current decreases after irradiation for a forward voltage larger than ~ 0.7 V. This reduction can be explained by an increased resistivity of the Si substrate. The degradation recovers by thermal annealing after irradiation. For a fluence of 1 × 10¹⁵ e/cm², the diode performance almost recovers to the initial condition after 250 °C annealing. For the transistors, after irradiation, a slight negative shift of the threshold voltage and a decrease of the drain current for input and output characteristics have been observed together with a decrease of hole mobility. This is mainly due to the increase of the threshold voltage induced by positive charge trapping in the gate oxide.     

Hydrogenation properties and crystal structures of Ti−Mn-V BCC solid solution alloys

We have proposed new hydrogen absorbing alloys of the ‘Laves phase related BCC solid solution alloy’, the hydrogen capacity of which reaches almost double that of conventional rare-earth based AB₅ alloys. We have reported the hydrogen absorbing properties of Ti−V−Mn, Ti−V−Cr and T−V−Mn−Cr alloys. It has been accepted that the crystal structural change of BCC hydrogen absorbing alloys is the same as that of V metal. The mono-hydride (H/M=1) of V metal has a BCT structure and the di-hydride (H/M=2) has an FCC structure. However, we recently found that the Ti−V−Mn alloy shows different behaviors in phase transformation with hydrogenation to V metal. We found three hydride phases with a BCC, a deformed FCC and an FCC structure in the Ti−V−Mn solid solution alloy-H₂ system. The deformed FCC hydride phase has not yet to our knowledge been reported. The lattice constant of the deformed FCC was 0.407 nm, one axis of which is reduced by about 4%. Its single-phase region appeared at a hydrogen content between 0.8 H/M and 1.0 H/M in absorption at 298 K. The lower plateau observed due to formation of the deformed FCC hydride phase gives an increase of effective hydrogen capacity by decreasing hydrogen remaining in the alloy in the desorption process. This article based on a presentation made in the symposium “The 2nd KIM-JIM Joint Symposium: Hydrogen Absorbing Materials”, held at Hanyang University, Seoul, Korea, October 27–28, 2000 under the auspices of The Korean Institute of Metals and Materials and The Japan Institute of Metals.