An improved technique for exfoliating and dispersing nanoclay particles into polymer matrices using supercritical carbon dioxide

An environmentally benign process, which uses supercritical carbon dioxide (sc-CO₂) as a processing aid, is developed in this work to help exfoliate and disperse nanoclay into the polymer matrices. The process relies on rapid expansion of the clay followed by direct injection into the extruder where the mixture is dispersed into the polymer melt. Results from the mechanical properties, rheological studies, and X-ray diffraction (XRD) show that this method represents a significant improvement relative to direct melt blending in single or twin-screw extruders or other methods using sc-CO₂. The greatest mechanical property response was a result of directly injecting pre-mixed sc-CO₂ and nanoclay into the polypropylene melt during extrusion. It was observed that for concentrations as high as 6.6 wt% (limited only by present process capabilities), XRD peaks were eliminated, suggesting a high degree of exfoliation. Mechanical properties such as modulus increased by as much as 54%. The terminal region of the dynamic mechanical spectrum was similar to that of the base polymer, contrary to what is frequently reported in the literature.     

Authentification and identification — Taking the user into account

Username/Password is still the prevailing authentication mechanism for internet based services — but it is not secure! We show how new authentication and identification mechanisms focused on usability and security can change this.     

Graft polymerization of vinyl acetate onto silica

The free‐radical graft polymerization of vinyl acetate onto nonporous silica particles was studied experimentally. The grafting procedure consisted of surface activation with vinyltrimethoxysilane, followed by free‐radical graft polymerization of vinyl acetate in ethyl acetate with 2,2′‐azobis(2,4‐dimethylpentanenitrile) initiator. Initial monomer concentration was varied from 10 to 40% by volume and the reaction was spanned from 50 to 70°C. The resulting grafted polymer, which was stable over a wide range of pH levels, consisted of polymer chains that are terminally and covalently bonded to the silica substrate. The experimental polymerization rate order, with respect to monomer concentration, ranged from 1.61 to 2.00, consistent with the kinetic order for the high polymerization regime. The corresponding rate order for polymer grafting varied from 1.24 to 1.43. The polymer graft yield increased with both initial monomer concentration and reaction temperature, and the polymer‐grafted surface became more hydrophobic with increasing polymer graft yield. The present study suggests that a denser grafted polymer phase of shorter chains was created upon increasing temperature. On the other hand, both polymer chain length and polymer graft density increased with initial monomer concentration. Atomic force microscopy–determined topology of the polymer‐grafted surface revealed a distribution of surface clusters and surface elevations consistent with the expected broad molecular‐weight distribution for free‐radical polymerization. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 300–310, 2003     

Efficacy of iron fortification compared to iron supplementation among Vietnamese schoolchildren

Background  

Parents of six children are facing a trial on charges of aggravated manslaughter in the care a 5 1/2 month old infant who died suddenly and neglect of their four older children for causing them to be malnourished by feeding them all an exclusively raw foods vegan diet. Both parents declined plea bargains and plan to defend themselves in court.     

Hierarchical three dimensional curved beam element based on p-version

This paper presents a three node curved three dimensional beam element for linear static analysis where the element displacement approximation in the axial () and transverse directions ( and ) can be of arbitrary polynomial orders p , p and p . This is accomplished by, first constructing one dimensional hierarchical approximation functions and the corresponding nodal variable operators in , and directions using Lagrange interpolating polynomials and then taking the products (also called tensor product) of these hierarchical one dimensional approximation functions and the corresponding nodal variable operators. The resulting approximation functions and the corresponding nodal variables for the three dimensional beam element were hierarchical. The formulation guarantees C ⁰ continuity. The element properties are established using the principle of virtual work. In formulating the properties of the element all six components of the stress and strain tensor are ratained. The geometry of the beam element is defined by the coordinates of the nodes located at the axis of the beam and node point vectors representing the nodal cross-sections. The results obtained from the present formulation are compared with analytical solutions (when available) and the h-models using isoparametric three dimensional solid elements. The formulation is equally effective for very slender as well as deep beams since no assumptions are made regarding such conditions during the formulation.     

Application of Fuzzy Moving Sliding Surface Approach for Container Cranes

International Journal of Control, Automation and Systems - In this paper, we consider the fuzzy moving sliding surface anti-sway control problem for container cranes. We first introduce the dynamic...     

Satellite-Based Water Quality Mapping from Sequential Simulation with Parameter Outlier Removal

The satellite-based regression model provides the data model that identifies water quality for inland and coastal waters. However, the satellite regression usually depends on the selection of observation, satellite data, and model type. A resampling simulation technique, such as sequential simulation using geographically weighted regression (GWR simulation), can be applied in generating multiple realizations for water quality estimation to reduce the sampling effect and consider spatial heterogeneity. Traditional models often result in considerable underestimation in extreme observations. The GWR simulation provides the best goodness of fit and spatial varying relationship between observed water quality and remote sensing considering parameter outlier and noise removal for parameter stability. This simulation model can increase the sampling diversity from various observations and reduce the neighboring effects of observations using outlier and noise removal. The model that handles spatial uncertainty and heterogeneity is a novel tool for inferring the characteristics of water quality from a series of sample subsets.

     

Near infrared light-induced disassembly of polymeric micelles based on methylene blue conjugated polyethylene glycol

Light-sensitive drug delivery systems are considered ideal for applications in the biomedical fields for their ability to release the payload in an on-demand spatiotemporal controlled manner through the manipulation of the light source. Among the broad radiation spectrum, near infrared (NIR) light is considered advantageous compared to UV and visible light, due to its inherently lower photodamage to normal tissues and deeper penetration to lesion areas. In this study, we report a successful synthesis of a polymer capable of undergoing partial degradation upon irradiation with NIR light by conjugating 10-N-carbamoyl linkage methylene blue (MB) moiety, a NIR photocleavable ligand, with polyethylene glycol (PEG). Through effective coupling of MB, a hydrophobic moiety, to the hydrophilic PEG molecule, an amphiphilic polymer was synthesized, as demonstrated by a lowered surface tension (55 mN/m at 0.1% wt/vol). Subsequently, photo-induced reversal of surface activity associated with self-assembled structure disruption, was displayed by surface tension measurements, size distribution analysis, and burst release profile of paclitaxel (PTX) from polymeric micelles upon the exposure to NIR irradiation.     

基于介电泳效应的高速抛光电极分布仿真研究与实验验证

目的解决传统平面环抛过程中存在的两种问题:(1)抛光液受抛光盘和工件旋转离心力作用而抛光液在加工区域分布不均,导致加工工件高平面度差;(2)抛光液受到的离心力作用限制了抛光盘转速,导致抛光效率低。方法提出一种基于介电泳效应的平面抛光方法(DEPP),在抛光区域增加一个非均匀电场,利用中性粒子在非均匀电场中极化后受介电泳力的作用,使其具有向电极和抛光区域中心运动的现象,降低旋转离心力对抛光液的甩出作用,实现对平面工件的高速、高精度抛光。采用有限元分析软件数值模拟极化后磨粒所受介电泳力对离心力的抑制作用,优化产生非均匀电场的不同电极宽度,得到最优非均匀电场电极分布参数,实际测量优化电极后抛光液所受介电泳力的大小和方向,最后搭建试验平台验证介电泳效应高速抛光平面工件的有效性。结果提高抛光盘转速,进行抛光磨砂玻璃对比实验,加工1 h以后,采用介电泳效应抛光能完全去除玻璃磨砂层,工件平整度好,最终RMS值为0.276λ;无介电泳效应抛光后,工件中心部分磨砂层仍有存在,工件平整度相对较差,最终RMS值为0.694λ。通过测量加工去除量,介电泳效应抛光比无介电泳效应抛光的去除率提升了18%结论通过仿真模拟和实验验证,证明了调整电极布置形式以及优化电极分布参数后,介电泳效应高速平面抛光的方法能够有效提升抛光效率和抛光后工件表面平面度。     

Micro cam system driven by electrostatic comb-drive actuators based on SOI-MEMS technology

Microsystem Technologies - This paper reports a design and fabrication process of a micro cam system (MCS) with a flat-faced translating follower. The cam rim with cover diameter of 2.4 mm...