Optimized sintering behavior and microwave dielectric properties of Ca1+2xSnSi2x+yO3+6x+2y by composition modulation

Ca_1+2xSnSi_2x+yO_3+6x+2y (0.1 ≤ x ≤ 0.9; 0.1 ≤ y ≤ 0.9) microwave dielectric ceramics were prepared through traditional solid-state reaction sintered at 1450°C–1500°C for 5 hours. The Ca₃SnSi₂O₉ second phase replaced the SnO₂ second phase of the Ca_1+2xSnSi_2xO_3+6x (x = 0, y = 0) ceramics by controlling the ratio of Ca:Sn:Si. The cracks of CaSnO₃ (x = 0, y = 0) ceramic were inhibited, the microwave dielectric properties were optimized by introducing the Ca₃SnSi₂O₉ second phase, and the CaSnO₃-Ca₃SnSi₂O₉ mixture system existed at (0.1 ≤ x ≤ 0.9, y = 0). The CaSnSiO₅ phase with positive τ_f value was related to the Si-rich in CaSnSi_yO_3+2y (x = 0; 0.1 ≤ y ≤ 0.9), and the coexistence of three and four phases was obtained at CaSnSi_yO_3+2y (0.1 ≤ y ≤ 0.9) ceramics. The CaSnSiO₅ phase appeared at CaSnSi_yO_3+2y (0.3 ≤ y ≤ 0.9) ceramics. The CaSnSi_yO_3+2y (y = 0.8) ceramic with 49.2 wt% CaSnSiO₅ phase exhibited excellent microwave dielectric properties: ε_r = 11.06, Q × f = 57,500 GHz (at 11.5 GHz), and τ_f = +8.1 ppm/°C.     

Phase evolution,crystal structure,and microwave dielectric properties of gillespite-type ceramics

A gillespite-structured MCuSi₄O₁₀ (M = Ba_1-xSr_x, Sr_1-xCa_x) ceramics with tetrahedral structure (P4/ncc) were prepared by solid-state reaction method. X-ray diffraction and thermogravimetry with differential scanning calorimetry (TG-DSC) were employed to study the phase synthesis process of BaCuSi₄O₁₀. Pure BaCuSi₄O₁₀ phase was obtained at 1075°C and decomposed into BaSiO₃, BaCuSi₂O₆, and SiO₂ when calcined at 1200°C. The relationships between the crystal structure and microwave dielectric properties of MCuSi₄O₁₀ ceramics were revealed based on the Rietveld refinement and P-V-L complex chemical bond theory. The dielectric constant (ε_r) decreased linearly with decreasing total bond susceptibility and ionic polarizability. Quality factor (Q × f) was closely dependent on bond strength and lattice energy. The temperature coefficient of resonant frequency (τ_f) was controlled by the stability of [CuO₄]⁶⁻ plane in MCuSi₄O₁₀. Optimum microwave dielectric properties were obtained for SrCuSi₄O₁₀ when sintered at 1100°C for 3 hours with a ε_r of 5.59, a Q × f value of 82 252 GHz, and a τ_f of −41.34 ppm/°C. Thus, SrCuSi₄O₁₀ is a good candidate for millimeter-wave devices.     

Thermal stability and performance of optimized ZrCx diffusion barriers in ceramic coating systems for ATF applications

Surface-modified Zr alloy claddings with advanced ceramic coatings are promising materials for accident-tolerant fuel (ATF) systems to meet stringent safety regulations concerning light water reactors. The applications of ceramic coatings are, however, limited as a result of inferior thermal stability when used in conjunction with Zircaloy-4 (Zry-4) substrates. Herein, the thermal stability of sub-stoichiometric zirconium carbide barrier layers as a function of composition was studied. Integrated ceramic coatings comprising ZrC_0.55 diffusion barriers and a Cr₂AlC top layer were synthesized via a magnetron sputtering method. After rapid thermal annealing, the ZrC_0.55 barrier layer having a thickness of 0.5 μm effectively prevented the inter-diffusion between Cr₂AlC and the Zry-4 substrate, thereby ensuring retention of the structural integrity of the integrated ceramic coating system for ATF applications.     

The effect of washing process on the cracking of ZrO2 microspheres by internal gelation

ZrO₂ microspheres are widely used as a simulant of UO₂ in the development of nuclear fuel. However, the cracking of ZrO₂ microspheres prepared by internal gelation is still a challenge during drying and sintering processes. To address this issue, we designed and optimized the washing process for obtaining crack-free ZrO₂ microspheres. Through thermogravimetric, infrared, Raman, BET, and SEM analysis, it is shown that the cracking of the microspheres is mainly related to the pores in microspheres. The washing solvent with low surface tension is used to reduce the effect of capillary force on pore shrinkage. Therefore, the optimal washing process was designed as trichloroethylene (TCE)—0.5 M NH₃.H₂O—Propylene glycol methyl ether (PM) and gel microspheres with a high specific surface area of 315.3 m²/g and pore volume of 0.4125 cm³/g were obtained. The characterizations also further showed that when the microspheres were dried and sintered, the water vapor and the decomposition gas of organic matter were completely released from the pores in the microspheres. Our new washing process could be directly extended for preparing crack-free ceramic microspheres by internal gelation.     

Cold Plasma Treatment of Soybean Oil with Hydrogen Gas

High-voltage atmospheric cold plasma (HVACP) treatment generates reactive gas species that induce inter- and intramolecular reactions in soybean oil. The goal of this study is to analyze the effect of HVACP treatment on the chemical structure of soybean oil in a hydrogen gas environment at atmospheric pressure. HVACP was used to treat soybean oil (15 g) for up to 6 hours by triplicate. Plasma-generated reactive gas species interact with the sample, producing three distinct fractions identified as a liquid, gel, and solid. Fatty acid profile, Fourier-transform infrared spectroscopy, proton and carbon nuclear magnetic resonance, size-exclusion chromatography, thermal properties, and peroxide value were used to characterize the chemical structure. Results indicated a lower content of polyunsaturated fatty acids, increased content of saturated fatty acids, and the presence of isomers. An insoluble portion was observed in the solid fraction and increased with treatment time up to 42% in the 6-h treated samples. Plasma species may cause two main reactions: polymerization and hydrogenation.     

Differences in electrochemical corrosion behaviours between selective laser melted and wrought Ti6Al4V alloys in acid fluoride-containing artificial saliva

Journal of Applied Electrochemistry - In this work, the electrochemical corrosion behaviours of selective laser melted (SLMed) and wrought Ti6Al4V alloys in acid fluoride-containing artificial...     

Atomistic simulations of functionalization of aramid fiber-epoxy nanocomposite

Owing to its high degree of crystallinity and orientation, the surface of aramid fiber is smooth, causing its low bonding strength with polymer matrix. This has restricted the application of aramid fiber in reinforced polymer materials. Effective methods are by introducing functional groups through surface modification and by increasing its surface roughness thereby greatly improving its bonding strength with the polymer. In this work, molecular dynamics (MD) simulation study fiber functionalized with hydroxyl (OH), carboxyl (COOH), and the silane coupling agent as nanofillers for polymer nanocomposites. The interfacial characteristics and the mechanical behavior of polymer nanocomposites are investigated. The results show that the functionalization can enhance the interfacial shear stress and tensile strength. The functional group not only provides a stronger interface, but also provides additional mechanical interlocking effect, which effectively improves load-bearing transmission capacity. The analysis of the micro-mechanism from the energy level also provides new insights for the functionalized design of nanocomposites.     

Effect of particle size on flame retardancy and mechanical properties of hydroxyethyl diphosphate modified aluminum hydroxide intrinsic polyethylene terephthalate

Organic–inorganic hybrid flame retardant was obtained by modifying aluminum hydroxide with different particle size with 1-hydroxyethylidene-1,1-diphosphonic acid. The structure of the organic–inorganic hybrid flame retardant is characterized by Fourier transform infrared spectroscopy, X-ray diffraction, and scanning electron microscopy, while ¹H-NMR spectroscopy only characterizes specific samples. The thermal stability and flame retardancy of the samples were analyzed by thermogravimetric analysis, limiting oxygen index (LOI), vertical combustion of UL-94 and cone calorimeter. The results show that the modified 10 μm aluminum hydroxide has a better effect than the 25 μm aluminum hydroxide and 100 nm aluminum hydroxide. Compared with pure polyethylene terephthalate (PET), the LOI value of the best sample is increased by 24.4%, and UL-94 V reaches V-0 level. Heat release rate, total heat release rate, and carbon monoxide production rate decreased by 45.8%, 33.2%, and 41.5%, respectively, compared to pure PET. The results showed that the aluminum hydroxide with a particle size of 10 μm exhibited the best flame retardant effect, which could be attributed to the decomposition of organic phosphoric acid and the dehydration of aluminum hydroxide, yielding a higher amount of residual carbon.     

Weathering modification of acrylic emulsion by introducing UV absorbing groups

A new kind of UV-absorbing silicon-fluorinated acrylic emulsion was prepared by emulsion polymerization with 4-allyloxy-2-hydroxybenzophenone, 3-methacryloxypropyltrimethoxysilane (MPS) and hexafluorobutyl methacrylate (HFMA) as functional monomers. The emulsion and its coating were characterized by transmission electron microscope, Fourier transform infrared spectrum (FTIR), X-ray photoelectron spectroscopy, ultraviolet absorption spectrum,thermo-gravimetric analysis, water contact angle (CA), and artificial accelerated aging test. The results indicated that the emulsion with core-shell structure was synthesized and showed prominent absorption peaks at 320 and 350 nm. The water CA of the coating was increased from 70.2° to 86.7° because of the incorporated HFMAs and MPSs. Both of the initial and final decomposition temperatures of the coating were increased by more than 20°C compared with those of the unmodified coating. After 10 days of accelerated aging, the color difference (ΔE) and rate of loss of gloss (ΔG) were only 2.78% and 5.22%, while those of the unmodified coating were as high as 22.94% and 78.57%, respectively. Because of the UV absorbers were incorporated by chemical reaction, the new coating had a more durable and effective anti-ultraviolet performance compared with the coatings the UV absorbers were introduced by physical blending.     

Preparation and tribological behavior of polytetrafluoroethylene/metal mesh composites with sandwich structure

Polytetrafluoroethylene (PTFE) owns an excellent self-lubricating performance, but its wear rate is very high due to the large-scale spalling of the matrix in the friction. In this paper, A new kind of PTFE composites with sandwich structure was prepared by layer-press technology, whose middle layer is filled with metal mesh. The influence of the mesh structure and mesh density of middle metal layer on tribological properties of composites were researched in detail. The results revealled that the metal mesh located in the composites can efficiently prevent the large-scale spalling of PTFE, which induces the sample of PTFE/500# plain woven dutch metal mesh (PTFE-500#PWD) to have a lower wear rate (9 × 10⁻⁵ mm³/Nm) and COF (0.106) under the fixed experimental condition. The prepared PTFE/metal mesh composites reveal excellent anti-friction and anti-wear performance, which can be used to fabricate a new kind of self-lubricating materials.