New approach for synthesis of activated carbon from bamboo

Unconventional pretreatment, that is, delignification and the addition of guanidine phosphate, was performed for the synthesis of activated carbon having a high specific surface area from bamboo by physical activation. The values of the specific surface area, total pore volume, and average pore size depended on the amount of added guanidine phosphate and the CO₂ activation time. The amount of the added guanidine phosphate under the optimum conditions for the highest specific surface area was much lower than that of the phosphorous acid chemical activator under conventional conditions. The N₂ adsorption isotherms of all the samples were type I, which means that micropores were dominant. The pore sizes of the samples in this study were similar to that of the physically-activated carbon. Therefore, the activation process was presumed to be essentially not chemical, but physical. The relation between the yield and the specific surface area improved with the addition of guanidine phosphate. The reason for the improvement may be the change in the reactivity of the carbon material generated during the heating process. The maximum specific surface area was ca. 2000 m² g^?1, which is a high value for a physically-activated carbon.     

Epoxy curing reaction studied by using two‐dimensional correlation infrared and near‐infrared spectroscopy

The isothermal curing process of bisphenol A epoxy resin with polyamine reagent (1,6‐diaminohexane) was monitored in situ by using temperature‐controlled Fourier‐transform infrared (FTIR) and Fourier‐transform near infrared (FTNIR) spectroscopy to elucidate the relative changes in functional groups during the curing reaction. It was shown that generalized two‐dimensional correlation spectroscopy can provide new information about the mechanisms and kinetics of the curing process, and the band assignments for complex NIR spectrum associated with this system. The sequential order of relative changes in functional groups during the curing process was examined by generalized 2D correlation spectroscopy and NIR‐IR hetero‐correlation spectroscopy, and the details of the complex epoxy curing reaction involving both primary and secondary amino group were revealed. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Intestinal absorption and biological effects of orally administered amorphous silica particles

Although amorphous silica nanoparticles are widely used in the production of food products (e.g., as anticaking agents), there is little information available about their absorption and biological effects after oral exposure. Here, we examined the in vitro intestinal absorption and in vivo biological effects in mice of orally administered amorphous silica particles with diameters of 70, 300, and 1,000 nm (nSP70, mSP300, and mSP1000, respectively) and of nSP70 that had been surface-modified with carboxyl or amine groups (nSP70-C and nSP70-N, respectively). Analysis of intestinal absorption by means of the everted gut sac method combined with an inductively coupled plasma optical emission spectrometer showed that the intestinal absorption of nSP70-C was significantly greater than that of nSP70. The absorption of nSP70-N tended to be greater than that of nSP70; however, the results were not statistically significant. Our results indicate that silica nanoparticles can be absorbed through the intestine and that particle diameter and surface properties are major determinants of the degree of absorption. We also examined the biological effects of the silica particles after 28-day oral exposure in mice. Hematological, histopathological, and biochemical analyses showed no significant differences between control mice and mice treated with the silica particles, suggesting that the silica nanoparticles evaluated in this study are safe for use in food production.     

Characterization of carbonaceous films deposited on metal substrates by liquid-phase electrodeposition in methanol

In this study, we report the characterization of carbonaceous films deposited on metal substrates by liquid-phase electrodeposition in methanol. The characterization of carbonaceous films by electrodeposition was examined by means of Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), electron energy loss spectroscopy (EELS), secondary ion mass spectrometry (SIMS), atom probe (AP) and high resolution-elastic recoil detection analysis (HR-ERDA). From these results, it was found that the films deposited on the metal substrates were composed of the sp² and sp³ carbon contents, of which the ratio was about 7:3. Furthermore, the films by electrodeposition contained much hydrogen. The hydrogen contents in the surface were about 60 at.% and those in the subsurface were a few 10 at.%.     

Experimental study on latent heat storage characteristics of W/O emulsion -Supercooling rate of dispersed water drops by direct contact heat exchange-

Recently, much attention has been paid to investigate the latent heat storage system. Using of ice heat storage system brings an equalization of electric power demand, because it will solved the electric -power-demand-concentration on day-time of summer by the air conditioning. The flowable latent heat storage material, Oil/Water type emulsion, microencapsulated latent heat material-water mixture or ice slurry, etc., is enable to transport the latent heat in a pipe. The flowable latent heat storage material can realize the pipe size reduction and system efficiency improvement. Supercooling phenomenon of the dispersed latent heat storage material in continuous phase brings the obstruction of latent heat storage. The latent heat storage rates of dispersed water drops in W/O (Water/Oil) emulsion are investigated experimentally in this study. The water drops in emulsion has the diameter within 3 ～ 25μm, the averaged water drop diameter is 7.3μm and the standard deviation is 2.9μm. The direct contact heat exchange method is chosen as the phase change rate evaluation of water drops in W/O emulsion. The supercooled temperature and the cooling rate are set as parameters of this study. The evaluation is performed by comparison between the results of this study and the past research. The obtained experimental result is shown that the 35K or more degree from melting point brings 100% latent heat storage rate of W/O emulsion. It was clarified that the supercooling rate of dispersed water particles in emulsion shows the larger value than that of the bulk water.     

The stability of monochlorotriazinyl reactive dyes on cellulose films in aqueous alkaline solutions containing peroxide bleaching agents

The stability of seven reactive (one difluoromonochloropyrimidinyl and six monochlorotriazinyl) dyes on cellulose immersed in sodium peroxoborate (PB) solution (UK–TO solution) containing tetraacetylethylenediamine (TAED) was examined using cellulosic films at 60 °C. The extent of dye loss that occurred from the dyed cellulosic films which were immersed in the UK–TO solution without detergent correlated closely to the ratings obtained using the BS 1006 UK–TO wash test. The dye loss that occurred from the dyed cellophane films was attributed to three contributions, namely, alkaline hydrolysis of dye–fibre bonds, oxidative fading of the dye chromophore by peroxides and cellulose degradation accelerated by PB and TAED. The alkaline hydrolysis of the dye–fibre bond and the extent of cellulose degradation in the UK–TO solution were the main contributions to the dye loss; dye oxidation was a minor factor in the dye loss mechanism. The physical bonding of the dye molecules reinforced the covalent dye–fibre bond stability towards the UK–TO solution.     

Controlled radical polymerization with polyolefin macroinitiator: a convenient and versatile approach to polyolefin-based block and graft copolymers

This paper introduces the new synthetic methodology of polyolefin-based block and graft copolymers with polar segments [e.g., polystyrene and poly(meth)acrylates]. Various brominated polyolefins were prepared by bromination of polyolefins with N-bromosuccinimide. The resulting brominated polyolefins were able to initiate the controlled radical polymerization of polar monomers, such as methyl methacrylate, ethyl acrylate, t-butyl acrylate, styrene and 2-(dimethylamino)ethyl acrylate, using a CuBr/N,N,N′,N″,N″-pentamethyldiethylenetriamine catalyst system, leading to a variety of polyolefin-based copolymers with a different content of the corresponding polar segment. Because of the accessible synthesis of polyolefin macroinitiators, this synthetic methodology is expected to result in the preparation of a wide range of polyolefin-based block and graft copolymers.     

Distribution of carbon contamination in MgAl2O4 spinel occurring during spark-plasma-sintering (SPS) processing: I – Effect of heating rate and post-annealing

Carbon contamination from the carbon paper/dies during spark-plasma-sintering (SPS) processing was examined in the MgAl₂O₄ spinel. The carbon contamination sensitively changes with the heating rate during the SPS processing. At the high heating rate of 100 °C/min, the carbon contamination having organized structures occurred over almost the entire area from the surface to deep inside the SPSed spinel disk. In contrast, at the slow heating rate of 10 °C/min, the carbon contamination having disordered structures occurred only around the surface area. The carbon phases transform into high pressure CO/CO₂ gases by post-annealing in air and lead to pore formation along the grain junctions. The pore formation significantly occurs at the high heating rate due to the large amount of the contaminant carbon phases. This suggests that if once the carbon contamination was formed in the materials, it is very difficult to remove the carbon phases from the materials.     

Photo‐reductive fading of disperse azo dyes on nylon substrate: thermochemical analyses of reactions of photo‐induced radicals using the semiempirical molecular orbital method†

When the excited triplet states of disperse azo dyes with nitro groups abstract hydrogen to generate hydrazinyl (from azo groups) and nitrosyl hydroxide radicals (from nitro groups), both the radicals as H‐acceptors carry out azo scission, conversion to nitrogen dioxide via disproportionation reactions and self‐decomposition via rearrangement. A kinetic equation was formulated by the sum of these reactions, which describes the initial rates (K_PA) of reductive fading. The K_PA values were controlled by the rate constants of the reactions of hydrazinyl and nitrosyl hydroxide radicals as H‐acceptors, which were estimated by thermochemical analyses of the reactants, intermediates and end products using the semiempirical molecular orbital PM5 method, and by the concentrations of the reactants: H‐acceptors and H‐donors. The K_PA values observed for 12 dyes were explained semi‐quantitatively by multiple routes of reactions depending upon to what extent each radical reaction was thermochemically favoured.