Study of Superconducting Fault Current Limiter Using Vacuum Interrupter Driven by Electromagnetic Repulsion Force for Commutating Switch

Using a high-temperature superconductor, we constructed and tested a model superconducting fault current limiter (SFCL). The superconductor and the vacuum interrupter as the commutation switch were connected in parallel using a bypass coil. When the fault current flows in this equipment, the superconductor is quenched and the current is transferred to the parallel coil because of the voltage drop in the superconductor. This large current in the parallel coil actuates the magnetic repulsion mechanism of the vacuum interrupter. Due to the opening of the vacuum interrupter, the current in the superconductor is broken. By using this equipment, the current flow time in the superconductor can be easily minimized. On the other hand, the fault current is also easily limited by large reactance of the parallel coil     

Using selective precipitant for uranyl ions — Fundamental studies for evaluating the precipitant performance

We have developed a simple reprocessing process for spent FBR fuels using N-cyclohexyl-2-pyrrolidone (NCP) which has selective precipitation ability for UO₂²⁺ ions. It was confirmed that NCP has sufficient precipitation ability for UO₂²⁺ ions, decontamination capability (separation of UO₂²⁺ from simulated fission products), and resistance to γ-ray radiation in nitric acid solutions. These findings indicate that NCP is applicable to our reprocessing process. We have also evaluated performances of other precipitants such as N-n-propyl-2-pyrrolidone (NProP), N-n-butyl-2-pyrrolidone (NBP), and N-n-butyl-2-pyridone (NBPyr). It was found that higher decontamination factors (DFs) are obtained by using NProP and NBP. This can be interpreted that the hydrophobicity of NProP and NBP is lower than that of NCP. Furthermore, we have obtained an experimental result that the resistance of NBPyr to γ-ray radiation is superior to that of NCP.     

Analysis of the critical heat flux in round vertical tubes under low pressure and flow oscillation conditions. Applications of artificial neural network

Artificial neural networks (ANNs) for predicting critical heat flux (CHF) under low pressure and oscillation conditions have been trained successfully for either natural circulation or forced circulation (FC) in the present study. The input parameters of the ANN are pressure, mean mass flow rate, relative amplitude, inlet subcooling, oscillation period and the ratio of the heated length to the diameter of the tube, L/D. The output is a nondimensionalized factor F, which expresses the relative CHF under oscillation conditions. Based on the trained ANN, the influences of principal parameters on F for FC were analyzed. The parametric trends of the CHF under oscillation obtained by the trained ANN are as follows: the effects of pressure below 500 kPa are complex due to the influence of other parameters. F will increase with increasing mean mass flow rate under any conditions, and will decrease generally with an increase in relative amplitude. F will decrease initially and then increase with increasing inlet subcooling. The influence curves of mean mass flow rate on F will be almost the same when the period is shorter than 5.0 s or longer than 15 s. The influence of L/D will be negligible if L/D>200. It is found that the minimum number of neurons in the hidden layer is a product of the number of neurons in the input layer and in the output layer.     

A fast and compact elimination method of empty elements from a double‐array structure

A double‐array is a well‐known data structure to implement the trie. However, the space efficiency of the double‐array degrades with the number of key deletions because the double‐array keeps empty elements produced by the key deletion. This paper presents a fast and compact elimination method of empty elements using properties of the trie nodes that have no siblings. The present elimination method is implemented by C language. From simulation results for large sets of keys, the present elimination method is about 30–330 times faster than the conventional elimination method and maintains high space efficiency. Copyright © 2003 John Wiley & Sons, Ltd.     

Suppression of active-oxidation of Si-C fibers (Hi-Nicalon) under reduced pressure by carbon or silica coating

The suppression of the active-oxidation of Si-C fibers (Hi-Nicalon) by carbon or silica coating were investigated at 1773 K under a reduced pressure of 1.32 Pa, through mass change determination, XRD analysis, resistivity measurement, SEM observation and tensile test. The coating of carbon and silica were conducted by heat-treating at 1773 K in CO-CO₂ gas mixtures. After exposure under a reduced pressure, the carbon coating formed in pure CO gas remained almost perfect and the retained strength of 1.7 GPa was nearly identical to that in the as-heat treated state. On the other hand, the carbon coatings formed under other conditions and all the silica coatings were completely lost during vacuum exposure. The retained strengths were in the range of 0 to 1.6 GPa. The silica film was found to be ineffective for suppressing the active-oxidation during vacuum exposure.     

Layout and results from the initial operation of the high-resolution x-ray imaging crystal spectrometer on the Large Helical Device

First results of ion and electron temperature profile measurements from the x-ray imaging crystal spectrometer (XICS) diagnostic on the Large Helical Device (LHD) are presented. This diagnostic system has been operational since the beginning of the 2011 LHD experimental campaign and is the first application of the XICS diagnostic technique to helical plasma geometry. The XICS diagnostic provides measurements of ion and electron temperature profiles in LHD with a spatial resolution of 2 cm and a maximum time resolution of 5 ms (typically 20 ms). Ion temperature profiles from the XICS diagnostic are possible under conditions where charge exchange recombination spectroscopy (CXRS) is not possible (high density) or is perturbative to the plasma (low density or radio frequency heated plasmas). Measurements are made by using a spherically bent crystal to provide a spectrally resolved 1D image of the plasma from line integrated emission of helium-like Ar(16 +). The final hardware design and configuration are detailed along with the calibration procedures. Line-integrated ion and electron temperature measurements are presented, and the measurement accuracy is discussed. Finally central temperature measurements from the XICS system are compared to measurements from the Thomson scattering and CXRS systems, showing excellent agreement.     

Permeation measurements for investigating atomic hydrogen flux and wall pumping/fuelling dynamics in QUEST

In order to investigate the overall atomic hydrogen background and the dynamic characteristics of wall pumping/fuelling phenomenon, a permeation probe system has been developed and applied in the spherical tokamak QUEST. Reliability of measurements, within ±3% accuracy and a positive correlation with the hydrogen line emission over three orders of magnitude have been demonstrated for more than 3000 various plasma discharges. By comparison of the experimental permeation (flux) curves with the numerically simulated curves, the net incident atomic hydrogen flux is evaluated in the range of 1 × 10¹⁹ H m^?2 s^?1 to 4 × 10²⁰ H m^?2 s^?1. The atomic flux has been investigated as a function of various plasma operation parameters like RF power, gas pressure and magnetic configuration. Using the static particle balance and permeation measurements, the progress in wall conditioning has been investigated. An inverse correlation between the atomic hydrogen flux and improvement in wall pumping has been observed over the two campaigns.     

Uniformity of gallium doped zinc oxide thin film prepared by pulsed laser deposition

Recently, transparent conducting oxide thin films have attracted attention for the application to transparent conducting electrodes. In this work, we evaluated the uniformity of electrical, optical and structural properties for gallium doped zinc oxide thin films prepared on the 10 × 10 cm² silica glass substrate by pulsed laser deposition. The resistivity, carrier concentration, mobility, bonding state and atomic composition of the film were uniform along in-plane and depth direction over the 10 × 10 cm² area of the substrate. The film showed the average transmittance of 81-87%, resistivity of 1.4 × 10^− 3 Ω cm, carrier concentration of 9.7 × 10²⁰/cm³ and mobility of 5 cm²/Vs in spite of the amorphous X-ray diffraction pattern. The gradual thickness distribution was found, however, the potential for large-area and low temperature deposition of transparent conducting oxide thin film using pulsed laser deposition method was confirmed.     

A master-slave control system for a semi-autonomous underwater vehicle-manipulator system

Underwater vehicle-manipulator systems (UVMS) are expected to play an important role in ocean exploration. It is considered that UVMS will be operated by both automatic and manual control. We have proposed an automatic control method. In this article, we propose a master-slave system for a UVMS. The effectiveness of the proposed master-slave control system is demonstrated by using a floating underwater robot with a 2-link manipulator.     

PVC、EPR和CSM材料辐照后热氧化降解的反应动力学分析

采用气相色谱定量测量了聚氯乙烯(PVC)、乙丙橡胶(EPR)和氯磺化聚乙烯(CSM)等线缆绝缘材料经辐照后在不同温度下热老化过程中的O2消耗量.对实验数据进行了反应动力学分析,发现线缆绝缘材料的热氧化降解反应为一级反应.同时获得了不同温度下的反应常数,并与根据Arrhenius 方程计算的理论结果进行了比较.