Epoxysilane as adhesion promoter in duplex system

Coatings are one of the most used protection methods for metals. Metallic coatings, such as zinc and its alloys, are used to protect steel in mild corrosive environments. In aggressive environments, on the other hand, organic coatings must be employed in the so-called duplex systems. However, the galvanized steel/organic coating adhesion is a problem and many attempts had been done to solve it with the incorporation of a chromate-based or phosphate-based interlayer. Nowadays, the use of these compounds is questioned due to their environmental impact and new adhesion promoters, like silanes, are being investigated. The aim of this paper was to study the adhesion and the anticorrosive behavior of a duplex system with a layer of glycidoxypropyltrimethoxysilane (γ-GPS) between the zinc and the coating. Polarization tests and corrosion potential measurements were done on the γ-GPS/galvanized steel to select the better anticorrosive pretreatment conditions for the application of an organic traditional paint. Dried and wet adhesion of the coating to the pretreated substrate was studied by the standard tape test. Salt spray test and electrochemical noise technique were employed to study the corrosion behavior of the duplex systems. Results showed that the films of γ-GPS formed on galvanized steel diminished the corrosion current of the metal, but they do not protect the substrate by a barrier effect. The incorporation of the pretreatment in the duplex system increased the adhesion of the paint, especially when the pretreated substrate was cured 1?h at 200?°C.     

Divergent consequences of success and failure in Japan and North America: An investigation of self-improving motivations and malleable selves.

Self-enhancing and self-improving motivations were investigated across cultures. Replicating past research, North Americans who failed on a task persisted less on a follow-up task than those who succeeded. In contrast, Japanese who failed persisted more than those who succeeded. The Japanese pattern is evidence for a self-improving orientation: Failures highlight where corrective efforts are needed. Japanese who failed also enhanced the importance and the diagnosticity of the task compared with those who succeeded, whereas North Americans did the opposite. Study 2 revealed that self-improving motivations are specific to the tasks on which one receives feedback. Study 3 unpackaged the cultural differences by demonstrating that they are due, at least in part, to divergent lay theories regarding the utility of effort. Study 4 addressed the problem of comparing cultures on subjective Likert scales and replicated the findings with a different measure. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Drop-in replacement of R22 in heat pumps used for district heating — influence of equipment and property limitations

In Swedish district heating systems several large (25 MW) turbo-compressor driven heat pumps using R22 are installed. The only commercially available alternative is R134a, but its use could decrease the heating capacity by 35%. In this paper a method for finding the best working fluid for a specific heat pump plant is presented, and applied to a district heating plant. First, a screening is made among almost 2000 mixtures, using criteria such as condenser pressure, Mach number and temperature glide. Simulations of the plant are then made to investigate the change in heating capacity and COP when using a mixture instead of R134a. The results show that there are mixtures that can offer a substantially higher heating capacity than R134a, but there is a decrease in COP. The importance of considering the limiting parameters of the heat pump, such as maximum volume flow to each compressor stage and minimum evaporator pressure, is shown.     

Evaluation of in vitro antioxidant properties of some traditional Sardinian medicinal plants: Investigation of the high antioxidant capacity of Rubus ulmifolius

The antioxidant capacities of 11 botanical species used in the tradition of Sardinia as teas beverages or as decoction for medicinal purposes were evaluated using different in vitro methods (BR, TEAC, DPPH and FC). Among the various species, Rubus ulmifolius, resulted the more active with all the used methods. Phytochemical investigation on the extract yields in the isolation of several phenolic compounds namely caffeic acid, ferulic acid, quercetin-3-O-glucuronide, kaempferol-3-O-glucuronide, kaempferol-3-O-(6″-p-coumaroyl)-β-d-glucopyranoside, kaempferol-3-O-(6″-caffeoyl)-β-d-glucopyranoside, chlorogenic acid, 4-caffeoylquinic acid and 5-caffeoylquinic acid. The antioxidant activity of isolated compounds was also evaluated.     

Phage types, virulence genes and PFGE profiles of Shiga toxin-producing Escherichia coli O157:H7 isolated from raw beef, soft cheese and vegetables in Lima (Peru)

The present study was conducted in Lima Metropolitana to evaluate the prevalence of Shiga toxin-producing Escherichia coli (STEC) O157:H7 in raw beef, raw ground beef, soft cheese and fresh vegetables, sampled at different markets in the city. Between October 2000 and February 2001, 407 food samples were collected from different markets in the 42 districts of Lima Metropolitana. Samples were assayed for E. coli O157 by selective enrichment in modified Tryptic Soy Broth containing novobiocin, followed by immunomagnetic separation (IMS) and plating onto sorbitol MacConkey agar supplemented with cefixime and potassium tellurite. Fifty (12.3%) of 407 food samples resulted positive for E. coli O157 isolation (23 of 102 ground beef; 15 of 102 beef meat; eight of 102 soft cheese and four of 101 fresh vegetables). Thirty-five E. coli O157 isolates were further analysed for the presence of virulence genes. All 35 were positive by PCR for O157 rfbE, fliCh7, eae-gamma1 and ehxA genes. In addition, genes encoding Shiga toxins were detected in 33 of 35 isolates, five isolates (14%) encoded stx(1), stx(2), and 28 (80%) stx2 only. The isolates were of seven different phage types (PT4, PT8, PT14, PT21, PT34, PT54, and PT87) with three phage types accounting for 80% of isolates: PT4 (15 isolates), PT14 (8 isolates), and PT21 (5 isolates). Interestingly, the majority (31 of 35; 89%) of E. coli O157:H7 isolates characterized in this study belonged mainly to the phage types previously found in STEC O157:H7 strains associated with severe human disease in Europe and Canada. Pulsed-field gel electrophoresis (PFGE) of 32 isolates revealed 14 XbaI-PFGE groups (I to XIV) of similarity >85%, with 23 (72%) isolates grouped in five clusters. Some isolates from different districts presented a high clonal relatedness. Thus, PFGE group VIII clustered eleven strains from nine different districts. The broad range of PFGE subtypes found in this study demonstrates the natural occurrence of many genetic variants among STEC O157:H7 spread in Lima.     

Optimization and Validation of a UV–HPLC Method for Vitamin C Determination in Strawberries (<Emphasis Type="Italic">Fragaria ananassa</Emphasis> Duch.), Using Experimental Designs

Vitamin C or total ascorbic acid (TAA) in fruits can be assumed as ascorbic acid (AA) plus dehydroascorbic acid (DHA) content. The aim of this work was to optimize and validate, using experimental designs, a new high-performance liquid chromatographic method for vitamin C determination in strawberries. The mobile phase (MP) consisted of a 0.03 M sodium acetate/acetic acid buffer, 5% methanol. For optimization, a Box–Behnken design was used (three factors at three levels: (a) pH of MP, 3.8–5.8; (b) wavelength, 240–270 nm; and (c) flow rate, 0.5–1.2 ml min⁻¹). Responses were: AA and TAA areas, peak widths, and retention times. A global optimization was performed using the Derringer desirability function, and a value of 0.84 was reached for the combination of design factors: A = 5.8, B = 251 nm, and C = 1.15 ml min⁻¹. Method validation, using AA standard solutions, included: linearity study, limits of detection and quantification, and calibration and analytical sensitivity quantifications. Precision and accuracy were studied in strawberry extracts. The coefficients of variation (percent) were: AA, 1.5%; TAA, 1.8%, and DHA, 4.9%. Accuracy was evaluated with AA standard spiked in 30–150% range of the expected amount of analyte in real samples. The joint confidence elliptical region test and t test were employed for the study of the difference between recoveries (percent) and the ideal 100%. The robustness was analyzed using a fractional factorial design (3⁴⁻²), and an AA recovery study after slight changes in operative variables was performed. The results indicate that the optimized method was linear, sensible, precise, accurate, and robust.     

Processing of tomato: impact on in vitro bioaccessibility of lycopene and textural properties

BACKGROUND: Human studies have demonstrated that processing of tomato can greatly increase lycopene bioavailability. However, the difference between processing methods is not widely investigated. In the current study different thermal treatments of tomato were evaluated with regard to their impact on in vitro bioaccessibility and retention of lycopene and β‐carotene as well as textural properties. Thermal treatments used were low (60 °C) and high (90 °C) temperature blanching followed by boiling. RESULTS: Lycopene was relatively stable during thermal treatment, whereas β‐carotene was significantly (P < 0.05) reduced by all heat treatments except for low temperature blanching. In vitro bioaccessibility of lycopene was significantly increased from 5.1 ± 0.2 to 9.2 ± 1.8 and 9.7 ± 0.6 mg kg^?1 for low and high temperature blanching, respectively. An additional boiling step after blanching did not further improve lycopene bioaccessibility for any treatment, but significantly reduced the consistency of low temperature treated samples. CONCLUSION: Choice and order of processing treatments can have a large impact on both lycopene bioavailability and texture of tomato products. Further investigations are needed, but this study provides one of the first steps towards tomato products tailored to optimise nutritional benefits. Copyright © 2010 Society of Chemical Industry     

Mechanisms of the FMR1 Repeat Instability: How Does the CGG Sequence Expand?

A dynamic mutation in exon 1 of the FMR1 gene causes Fragile X-related Disorders (FXDs), due to the expansion of an unstable CGG repeat sequence. Based on the CGG sequence size, two types of FMR1 alleles are possible: “premutation” (PM, with 56-200 CGGs) and “full mutation” (FM, with >200 triplets). Premutated females are at risk of transmitting a FM allele that, when methylated, epigenetically silences FMR1 and causes Fragile X syndrome (FXS), a very common form of inherited intellectual disability (ID). Expansions events of the CGG sequence are predominant over contractions and are responsible for meiotic and mitotic instability. The CGG repeat usually includes one or more AGG interspersed triplets that influence allele stability and the risk of transmitting FM to children through maternal meiosis. A unique mechanism responsible for repeat instability has not been identified, but several processes are under investigations using cellular and animal models. The formation of unusual secondary DNA structures at the expanded repeats are likely to occur and contribute to the CGG expansion. This review will focus on the current knowledge about CGG repeat instability addressing the CGG sequence expands.     

3′5-Dimaleamylbenzoic Acid Attenuates Bleomycin-Induced Pulmonary Fibrosis in Mice

Idiopathic pulmonary fibrosis (IPF) is a chronic lung disease characterized by parenchymal scarring, leading progressively to alveolar architecture distortion, respiratory failure, and eventually death. Currently, there is no effective treatment for IPF. Previously, 3′5-dimaleamylbenzoic acid (3′5-DMBA), a maleimide, demonstrated pro-apoptotic, anti-inflammatory, and anti-cancer properties; however, its potential therapeutic effects on IPF have not been addressed. Bleomycin (BLM) 100 U/kg was administered to CD1 mice through an osmotic minipump. After fourteen days of BLM administration, 3′5-DMBA (6 mg/kg or 10 mg/kg) and its vehicle carboxymethylcellulose (CMC) were administered intragastrically every two days until day 26. On day 28, all mice were euthanized. The 3′5-DMBA effect was assessed by histological and immunohistochemical staining, as well as by RT-qPCR. The redox status on lung tissue was evaluated by determining the glutathione content and the GSH/GSSG ratio. 3′5-DMBA treatment re-established typical lung histological features and decreased the expression of BLM-induced fibrotic markers: collagen, α-SMA, and TGF-β1. Furthermore, 3′5-DMBA significantly reduced the expression of genes involved in fibrogenesis. In addition, it decreased reduced glutathione and increased oxidized glutathione content without promoting oxidative damage to lipids, as evidenced by the decrease in the lipid peroxidation marker 4-HNE. Therefore, 3′5-DMBA may be a promising candidate for IPF treatment.