Volatilization and recovery of mercury from mercury wastewater produced in the course of laboratory work using Acidithiobacillus ferrooxidans SUG 2-2 cells

The iron-oxidizing bacterium Acidithiobacillus ferrooxidans SUG 2-2 is markedly resistant to mercuric chloride and can volatilize mercury (Hg0) from mercuric ion (Hg2+) under acidic conditions. To develop a microbial technique to volatilize and recover mercury from acidic and organic compound-containing mercury wastewater, which is usually produced in the course of everyday laboratory work in Okayama University, the effects of organic and inorganic chemicals on the mercury volatilization activity of A. ferrooxidans cells were studied. Among 55 chemicals tested, the mercury volatilization from a reaction mixture (pH 2.5) containing resting cells of SUG 2-2 (1 mg of protein) and mercury chloride (14 nmol) was strongly inhibited by AgNO3 (0.05 mM), K2CrO7 (1.0 mM), cysteine (1.0 mM), trichloroethylene (1 microM), and commercially produced detergents (0.05%). However, the strong inhibition by trichloroethylene and detergents was not observed when these organic compounds were chemically decomposed using Fenton's method before the treatment of the wastewater with SUG 2-2 cells. When 20 ml of water acidified with sulfuric acid (pH 2.5) containing ferrous sulfate (3%), diluted mercury wastewater (17.5 nmol of Hg2+) and SUG 2-2 cells (0.05 mg of protein) were incubated for 10 d at 30 degrees C, 47% of the total mercury in the wastewater was volatilized and recovered into a trapping reagent for metal mercury. However, when the organic compounds in the mercury wastewater were decomposed using Fenton's method and then treated with A. ferrooxidans cells, approximately 100% of the total mercury in the wastewater was volatilized and recovered.     

Tiliroside, a glycosidic flavonoid, inhibits carbohydrate digestion and glucose absorption in the gastrointestinal tract

Scope Recent studies have reported that tiliroside, a glycosidic flavonoid, possesses anti‐diabetic activities. In the present study, we investigated the effects of tiliroside on carbohydrate digestion and absorption in the gastrointestinal tract. Methods and results This study showed that tiliroside inhibits pancreatic α‐amylase (IC₅₀ = 0.28 mM) in vitro. Tiliroside was found as a noncompetitive inhibitor of α‐amylase with K_i values of 84.2 μM. In male ICR mice, the increase in postprandial plasma glucose levels was significantly suppressed in the tiliroside‐administered group. Tiliroside treatment also suppressed hyperinsulinemia after starch administration. Tiliroside administration inhibited the increase of plasma glucose levels in an oral glucose tolerance test, but not in an intraperitoneal glucose tolerance test. In human intestinal Caco‐2 cells, the addition of tiliroside caused a significant dose‐dependent inhibition of glucose uptake. The inhibitory effects of both sodium‐dependent glucose transporter 1 (SGLT1) and glucose transporter 2 (GLUT2) inhibitors (phlorizin and phloretin, respectively) on glucose uptake were significantly inhibited in the presence of tiliroside, suggesting that tiliroside inhibited glucose uptake mediated by both SGLT1 and GLUT2. Conclusion These findings indicate that the anti‐diabetic effects of tiliroside are at least partially mediated through inhibitory effects on carbohydrate digestion and glucose uptake in the gastrointestinal tract.     

Development of Motor Model of Rotor Slot Harmonics for Speed Sensorless Control of Induction Motor

This paper proposes a novel mathematical dynamic model to represent the steady‐state and transient‐state characteristics of rotor slot harmonics of an induction motor for sensorless control. Although it is well known that the rotor slot harmonics originate from the mechanical structure of the induction motor, a mathematical model that describes the relationship between the stator/rotor currents of the induction motor and the slot harmonics has not yet been proposed. Therefore, in this paper, a three‐phase model of the induction motor that depicts the rotor slot harmonics is developed by taking into consideration the magnetomotive force harmonics and the change in the magnetic air gap caused by the rotor slots. The validity of the proposed model is verified by comparing the experimental results and the calculated values. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 186(3): 63–74, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22478     

Novel repeated batch operation for flash fermentation system: Experimental data and mathematical modelling

A novel repeated batch operation mode was proposed for ethanol fermentation, where the fermenter beer was periodically exchanged between the fermenter with biomass recycle and the distillation unit, to promote the selective removal of ethanol. Using the mathematical model developed, as based on the experimental results, the optimal operation of the proposed method was shown to attain high performance, with a productivity of about 12 g dm⁻³ h⁻¹ and a product concentration of 400 g dm⁻³.     

Network copolyesters from benzenepolycarboxylic acids and 1,6-hexanediol

Network copolyesters were prepared from trimesic (Y), pyromellitic (X) or mellitic (Y_H) acids and 1,6-hexanediol (6G). Prepolymers prepared by meltpolycondensation were cast from dimethylformamide solution and postpolymerized at 260°C for 6h to form a network. The resultant films were transparent, flexible and insoluble in any organic solvents. Degree of reaction estimated from the infrared absorbance of ester and methylene groups was almost the same for all films, 94–96%. X-ray diffraction intensity curves and densities showed that the ordering of networks was decreased by the copolymerization, which was remarkable for 6G–X/Y_H copolymer films and was consistent with the higher decreases of heat-distortion temperature for these copolymer films. The copolymerization also caused decrease of thermal stability, tensile properties and alkali resistance and increase of dye absorption.     

Characteristics of a-Si solar cells prepared by the super chamber at a high substrate temperature

A new approach to high-performance a-Si solar cells was studied. a-Si films prepared at a high substrate temperature (> 250°C) have a higher absorption coefficient and a low Si H₂ bond density. the effect of deposition temperature on the open-circuit voltage (V_oc) has been investigated systematically for glass/SnO2 Ipin/metal and glass/metal/nip/indium tin oxide (ITO) structure a-Si solar cells. The V_oc is found to depend strongly on the thermal history of the p/i interface. A short-circuit current of 19.5 mA/cm⁻⁻² was achieved for an a-Si solar cell using an a-Si i-layer with a thickness of 4000 Å, which was prepared at a substrate temperature of 270°C.     

Silicon-29 solid-state nuclear magnetic resonance spectroscopy of composite interfaces

The types of structures and bonds that are formed with silicons in the composite interface were studied using ²⁹Si cross-polarization/magic angle sample spinning (CP/MAS) nuclear magnetic resonance spectroscopy (NMR). The change in mobility of silane coupling agent bonded to silica, as compared with bulk hydrolyzed silane coupling agent, can be monitored by the change in line width and the shift of resonances to higher fields, as well as by the change in the silicon-proton cross-polarization time T_SiH. In the silane coupling agent-matrix resin interface, the T_SiH values reflect the change in mobility as a function of the concentration and degree of hydrolysis of the silane coupling agent. It has been demonstrated that quantitative measurements of T_SiH can be used to investigate relative mobilities.     

Controlling and monitoring interfacial reactions in composites of azidosilane modified glass filled polyethylene

Model composites of spherical glass particles dispersed in a matrix of high density polyethylene were prepared with controlled variations in the interfacial structure. Dynamic-mechanical measurements of the composites in the melt state were recorded. The physical properties are found to relate to the morphology, bonding, reactivity, and other characteristics of the interfacial region which can be controlled by the applied chemistry. The interfacial reactions can be monitored in-sity by dynamic-mechanical analysis and differential scanning calorimetry.     

Poly(aryl-ether-ether-ketone) and its advanced composites: A review

Poly(aryl-ether-ether-ketone) or PEEK is a highly aromatic semi-crystalline thermoplastic. Its good mechanical properties and solvent resistances rank it as one of the most promising matrix polymers for high performance composites. This article attempts to provide an in-depth review of work on PEEK and fiber-reinforced PEEK composites. Discussions on various areas including synthesis, molecular weight determination, solution properties, structural hierarchy, morphology and mechanical properties of both neat polymer and composites, will be provided. In addition, environmental effects such as physical aging, thermal aging, moisture, solvents, and radiation will be summarized.