乳液聚合中乳化剂对聚合物乳液稳定性的影响

简要叙述了聚合物乳液稳定性的测定方法，详细地讨论了乳化剂的类型、用量及加入方式等对丙烯酸酯类聚合物乳液的化学稳定性、机械稳定性及贮存稳定性的影响。     

Aromatic products of 340 °C supercritical-toluene extraction of two Turkish lignites: an n.m.r. study

Fractions of Elbistan and Seyitomer (Turkish) lignites, extracted with supercritical toluene at 340 °C and 8 MPa, have been separated by solvent extraction and silica-gel chromatography. Analyses by n.m.r. and i.r. spectroscopies and other methods have been combined in structural-analysis schemes to yield information about the average molecule in aromatic extracts. Carbon aromaticities, f_a, derived from 22.63 MHz ¹H-decoupled pulse Fourier-transform (PFT) ¹³C-n.m.r. are more widely spread for Elbistan (0.34–0.56) than for Seyitomer (0.40–0.43), and are lower than for supercritical-gas (SCG) products from bituminous coals. ¹³C-n.m.r. also reveals the presence of aromatic ether-O in polar fractions. Narrow aromatic signals in 100 MHz ¹H-n.m.r. spectra suggest the presence of single-aromatic-ring average structures. In the hexane-soluble aromatics, 27% (Elbistan) and 29% (Seyitomer) of the available sites are substituted by alkyI groups, some of which are at least eight carbon atoms long; the hexane-soluble polar and asphaltene/asphaltol fractions contain fewer such groups.     

A new LCL-lens array with electrodes of interlaced structure to be applied for auto-stereoscopic 3D displays

A new design of the liquid crystal lenticular (LCL) lens array with interlaced electrodes is proposed to realize an auto-stereoscopic 3D display. The structure of interlaced electrodes aims to generate a desired non-uniform electric filed to improve the focusing ability of the LCL-lens array with lower voltage drives. This paper is organized as first to describe the design criteria of a lenticular lens sheet for wide extended graphics array LCD panel. Based on the designed lenticular lens array, an LCL-lens array with proposed interlaced electrodes is next designed. The fabrication and the detailed structure are given. A series of experiments are then conducted and successfully verify the focusing capability and desired 3D display functions, that is, to separate two images to right and left eyes. Also, the developed auto-stereoscopic 3D display is able to adapt to varied viewer locations with favorable imaging quality.     

十四醇聚氧化烯烃醚琥珀酸单酯磺酸盐的表面活性研究

合成了一系列十四醇聚氧乙烯醚和聚氧丙烯醚琥珀酸单酯磺酸盐，比较了其临界胶束浓度、润湿力、起泡力等表面活性     

单组分阴离子水性聚氨酯胶膜的热质研究

应用热质分析（TG）研究了单组分阴离子水性聚氨酯胶膜的耐热性能，结果表明：n（--NCO）：n（--OH）增大，胶膜的耐热性能增强；聚酯相对分子质量增加，耐高温性能降低；用DEG扩链时的耐高温性能比用DEG／TMP时的好；TDI型水性聚氨酯成膜物的耐高温性能优于IPDI型水性聚氨酯。     

Fabrication of poly(PEGMA) surface with controllable thickness gradient and its mediation on the gradient adhesion of cells

The gradient surface shows enormous potential in the development of tissue engineering, biosensor, microfluidic control, and particle sorting. In this work, a poly(polyethyleneglycol methacrylate) (poly(PEGMA)) gradient surface was prepared through surface-initiated activators regenerated by electron transfer atom transfer radical polymerization (SI-AGRET ATRP). The effect of various parameters on the thickness growth of poly(PEGMA) film were analyzed, among which the excessive reducing agent was utmost important. The reducing agents supported the regeneration of Cu^I and eliminated the disturbance of air, maintaining the "living polymerization" of poly(PEGMA) up to 73.1 nm under tested conditions. The physicochemical properties of the fabricated surfaces were characterized by ellipsometry, X-ray photoelectron spectroscopy, water contact angle. The thickness slope of gradient poly(PEGMA) was controllable in a nanoscale range. The gradient surface was further grafted with CRGD (Cys-Arg-Gly-Asp) peptides onto the poly(PEGMA-co-[glycidyl methacrylate]) blocks via the ring-opening reaction between epoxy and amino groups, which showed a gradient change in water contact angle and adhesion of endothelial cells.     

醚菊酯的气相色谱分析

本文以气相色谱内标法建立对醚菊酯的定量分析方法,其标准偏差0.18,变异系数0.24%,线性相关0.999 996,平均回收率99.98%。     

工业废渣磷石膏用作充填材料的研究

研制了以工业废渣磷石膏为基材的充填材料.改性后磷石膏的耐水性大大增强,抗压强度≥0.79 MPa、渗透系数≤1×10-5cm.s-1,并且具有合适的C、Φ值.     

双模移动终端主动探测系统的DSP设计与实现

针对移动终端用户身份识别的技术需求,设计了一种基于GSM和CDMA双模制式下基带信号处理的主动探测系统。为了满足主动探测系统的实时处理需求,采用高性能的DSP芯片TMS320C6416作为核心处理器,结合其他器件设计硬件系统,完成基带信号处理板中DSP芯片硬件接口的设计。经现场测试结果验证,系统能够实现对开机状态下GSM和CDMA移动用户身份信息的快速捕获,进而表明本设计可满足系统实时性和可靠性的要求。     

PAMAM接枝稻草对Nd3+、Sm3+、La3+的吸附特性

以环氧氯丙烷为交联剂,将聚酰胺胺树状大分子(PAMAM)接枝到稻草基体上,利用FTIR、SEM、XRD、TG等对其结构进行了表征和分析。考察了其对Nd~(3+)、Sm~(3+)、La~(3+)稀土金属离子的吸附性能,探讨了吸附时间、稀土金属离子浓度、吸附温度、溶液pH等因素对吸附性能的影响。同时对吸附过程的动力学、吸附等温线和吸附热力学进行了研究。结果表明,所制备的吸附剂对Nd~(3+)、Sm~(3+)、La~(3+)稀土金属离子的吸附平衡时间约为4 h,平衡吸附量分别为47.14、40.11和50.12 mg/g。吸附过程符合拟二级动力学模型和Freundlich等温线,表明此吸附过程是属于化学吸附过程。吸附热力学研究表明,此吸附过程是自发进行的,同时吸附过程是一个混乱度增加的熵增过程。