大种量流加式高体积分数乙醇发酵工艺的研究

间歇式高体积分数乙醇发酵工艺存在残总糖高、糖醇转化率低的问题。通过对残总糖组成分析发现,糊精和还原糖质量浓度随拌料质量浓度的变大而逐步上升。结合文献分析可知,糊精和还原糖量较高的原因主要与糖化酶活力和酵母对糖的利用能力有关。为了解决这一问题,采用大种量流加式高体积分数乙醇发酵工艺,并对接种量、初始流加时间、流加时长和流加方式进行了优化。结果表明,当接种量（体积分数）为30%,培养8 h后开始流加,流加时长为20 h,且采用匀速的方式流加时,乙醇发酵结果最优。与间歇式高体积分数乙醇发酵工艺比较,残糖降低了6.5 g/L,糖醇转化率提高了3.2%。     

Natural Palm Olein Polyol as a Replacement for Polyether Polyols in Viscoelastic Polyurethane Foam

The impact of replacing three polyether polyols with different levels of a single palm olein‐based natural oil polyol (NOP) was systematically correlated with the changes in foaming reactivity, cell structure, physico‐mechanical properties, and morphology of viscoelastic (VE) foams. The data show that replacing the polyether polyols with the NOP slightly increased the rate of the foaming reactivity. Increasing the NOP content resulted in increased cell size and cells remained fully open. Increased NOP content contributed to higher load bearing properties of VE foam, which can be attributed to higher functionality of NOP compared to polyether polyols. Addition of the NOP slightly increased the resilience of the foams, however, the hysteresis which is the measure of energy absorption remained mostly unaffected. Age properties, characterized by dry and humid compression sets, were mostly unaffected by the replacement of the polyether polyol with the NOP. The addition of NOP did not impact the morphology of the VE foam polymer matrix, which appears to retain a low degree of hard and soft segment domain separation. Overall, the results demonstrate a feasibility that the NOP can be used to partially replace the polyether polyols in VE polyurethane foams without significant impact on the functional performance.     

Facile fabrication of polyethylene/silver nanoparticle nanocomposites with silver nanoparticles traps and holds early antibacterial effect

Antibacterial polyethylene (PE)/silver nanoparticle (AgNP) nanocomposites containing AgNPs at concentrations of 5 × 10^?5, 5 × 10^?4, and 5 × 10^?3 wt % were fabricated and tested. Transmission electron microscopy revealed an even dispersion of surface AgNPs in the PE/AgNP nanocomposites. No AgNP agglomeration was observed. The tensile strength, elongation at break, and Young's modulus of these PE/AgNP nanocomposites were similar to those of neat PE. Differential scanning calorimetry demonstrated that the PE/AgNP nanocomposites and neat PE had similar melting and crystallization temperatures of 126 ± 0.5 and 109 ± 0.6°C, respectively. The heats of fusion of the PE/AgNP nanocomposites containing AgNPs at concentrations of 5 × 10^?5 and 5 × 10^?4 and of 5 × 10^?3 wt % were lower than those of neat PE by 5 and 7%, respectively. These PE/AgNP nanocomposites were immersed in shaking liquid cultures of the potential pathogenic bacteria Escherichia coli, Bacillus subtilis, and Salmonella typhimurium in the lag phase. The results show that the growth rates of all of the tested bacteria were restricted effectively after 1.5, 3, and 6 h of cultivation, respectively. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43331.     

Controlling thickness to tune performance of high-mobility transparent conducting films deposited from Ga-doped ZnO ceramic target

Structure modification has been found to tune significantly the transparent-conducting performance, especially mobility and conductivity of hydrogenated Ga-doped ZnO (HGZO) films. The strong correlation between film thickness and mobility of the films is revealed. The mobility increases quickly with increasing the thickness from 350 to 900 nm, and then tends to be saturated at further thicknesses. A higher mobility than 50 cm²/Vs can be achieved, which is an extra-high value for polycrystalline ZnO films deposited by using the sputtering technique. The thickness-dependent mobility originates from scatterings on grain boundaries and dislocation-induced defects controlled by thin-film growth. Based on the Volmer-Weber model, an expansion model is built up to describe the thickness-dependent crystal growth of the HGZO films, especially at the thick films. As a result, the 800 nm-thick HGZO film obtains the highest performance with high mobility of 51.5 cm²/Vs, low resistivity of 5.3 × 10^?4 Ωcm, and good transmittance of 83.3 %.     

环氧大豆油在无溶剂环氧地坪涂料中的应用研究

采用环氧大豆油(ESO)作为无溶剂环氧地坪涂料体系的活性稀释剂成分,对环氧地坪涂料进行共混改性,研究了ESO用量对环氧地坪涂料的稀释作用和增塑作用,及其对环氧地坪体系性能的影响,确定ESO在环氧地坪涂料体系中的合适用量;并通过对固化剂和促进剂的选择和评估,确定合适的固化体系。     

Pull-Down of Metalloproteins in Their Native States by Using Desthiobiotin-Based Probes

One-third of all proteins are estimated to require metals for structural stability and/or catalytic activity. Desthiobiotin probes containing metal binding groups can be used to capture metalloproteins with exposed active-site metals under mild conditions so as to prevent changes in metallation state. The proof-of-concept was demonstrated with carbonic anhydrase (CA), an open active site, Zn²⁺-containing protein. CA was targeted by using sulfonamide derivatives. Linkers of various lengths and structures were screened to determine the optimal structure for capture of the native protein. The optimized probes could selectively pull down CA from red blood cell lysate and other protein mixtures. Pull-down of differently metallated CAs was also investigated.     

Effect of powder bed on the microstructure and electrical properties of Bi2O3- and Sb2O3-doped ZnO

The effects of powder bed on the microstructure and electrical properties of Bi₂O₃- and Sb₂O₃-doped ZnO specimens are investigated in the present study. By using a sufficient amount of powder bed, the weight loss of Bi₂O₃ reduces from >95 to <20%. The reduction of weight loss enhances significantly the densification and grain growth of ZnO. Furthermore, the use of powder bed can also reduce the size distribution of ZnO grains. Nevertheless, the presence of Bi₂O₃ residue results in the formation of a pyrochlore phase (Zn₂Bi₃Sb₃O₁₄) during the cooling down stage; its presence is detrimental to the nonlinear characteristics of ZnO–Bi₂O₃–Sb₂O₃ system.     

Stabilization of anthocyanins on thermally processed red D'Anjou pears through complexation and polymerization

Stabilization of red anthocyanins on the surface of thermally processed red pears (D'Anjou) through complexation with metallic ions and polymerization was investigated. Pears were treated briefly in an aqueous solution containing stannous (Sn) ion, hydrochloric acid, formaldehyde, and tannic acid prior to steaming and canning processes. Polymerization capacity of the treatment solutions was investigated by monitoring the haze formation of the solutions. Aqueous acetone extracts of the peels from fresh and treated pears at major processing steps (pre-treatment, steam-heating, and canning) were subjected to HPLC qualitative analysis on anthocyanins. The total phenolics (TP) and anthocyanin content (ACN) of the peels were measured by Folin-Ciocalteu assay and pH-differential method, respectively. Polymerization capacity of the solution was influenced by the composition, setting-time, and the time of Sn addition into the formulated solutions. The pre-treatment along with steam-heating resulted in stable red pigments on the peels of canned pears. The new pigments are believed to be the complexes of stannous and phenolics, including anthocyanins. No major newly formed anthocyanins or small phenolics were detected in treated pears. Although developed treatment formula did not represent a commercial application yet, this study revealed an effective approach of retaining red anthocyanins on thermally processed fruits.     

Nusselt number correlations for a microchannel heat exchanger hot water supplier with S-shaped fins

Using 3D-CFD code, Nusselt number correlations for a microchannel heat exchanger (MCHE) with S-shaped fins used for hot water suppliers are obtained through numerical experiments and then validated. The supercritical carbon dioxide working fluid is assumed to operate around the pseudo-critical point, where fluid properties change radically. Calculations with 20 different temperatures are executed to produce Nusselt number correlations for each side. The fluid inlet temperature in each calculation is defined as 2 °C lower or higher than the constant wall temperature, respectively, for cold and hot side simulations. The small temperature difference of 2 °C is sufficiently small to regard thermal–hydraulic properties as constant. A new integrating method using the correlations to calculate the heat-transfer-performance is proposed. The resultant heat-transfer-performance is compared with that of another numerical result, which is reduced from large geometry and integration. The results agree within 3% error; the calculation accuracy of the method is confirmed. Experimental results with MCHE verify the correlations. The difference is approximately 5%. Using few computer resources, these Nusselt number correlations and the heat-transfer-performance calculation methods using correlation information are sufficiently accurate to evaluate heat exchangers.