Abrasive wear of steel against gravel with different rock–steel combinations

Wear testing equipment and tests used in research laboratories are often miniature or simplified versions of real applications. For example standardized ASTM dry sand rubber wheel abrasion test G 65 and pin abrasion test G 132 are widely used to study materials’ abrasion wear resistance. The test results, however, do not always correlate too well with the results obtained from real wear conditions. One reason for this is, for example, that in the crushing applications of mining industry the abrasive size is usually much larger than that used in the laboratory wear tests. To study the abrasive wear caused by larger size gravel, new three-body abrasion test equipment was therefore constructed. The equipment uses the pin-on-disk principle with free abrasive particles of sizes up to 10 mm. During the test the pin is repeatedly pressed against a fixed amount of abrasive that is rotating with the disk having confining walls. As the pin is prevented from touching the counterbody, only the abrasive acts as the wearing agent.Three steels of different hardnesses were cross-tested as pin–disk pairs and as pins against a rubber disk using three igneous rock gravels with different crushability properties as abrasives. The wear was measured as mass loss from both the pin and the disk, and the rock comminution was measured by sieving. The results indicate that the mechanism of wear is greatly affected by the hardness of the counterbody. When using large size abrasives, the rate of comminution is also a very important factor that can significantly affect the wear test results.     

Identifying,framing and managing uncertainties in project portfolios

Uncertainties in the organization, external environment and from single projects may hamper project portfolio performance unless managed properly. This paper introduces a framework on uncertainties and their management in project portfolios and pursues increased understanding on how managers can take uncertainty into account better. We explore uncertainties, how managers frame them as opportunities or threats, and the actual practice of managing them across ten R&D project portfolios. The framework on project portfolio uncertainties and their management is further refined based on the empirical results. As key contributions, we show evidence on the balanced existence of three types of uncertainties, the threat bias in their framing, and the dominance of rational, opportunity driven mechanisms of control in uncertainty management. We discuss the context-dependent practice of project portfolio management and the need to complement rational mechanisms with structural and cultural, for project portfolio management to become a dynamic capability.     

Rigorous and approximate analysis of metallic gratings in soft X-ray and EUV regions

Abstract

In deep ultraviolet and soft X-ray regions the complex refractive indices of metals differ substantially from their values in the visible region of the spectrum. The implications of this fact are analysed for metallic gratings illuminated by electromagnetic fields with wavelengths ranging from soft X‐rays to near infrared, concentrating on short wavelengths. In particular, we study metal-stripe gratings (linear polarizers for visible light) by rigorous diffraction theory to determine the short-wavelength region in which a combination of the geometrical thin-element approximation and the theory of single-layer films can be applied. Then we study inductive grid filters for protection of X-ray detectors from infrared radiation in space applications.     

Design of non-paraxial array illuminators by step-transition perturbation approach

Abstract

We introduce an efficient Fourier-domain formulation of an approximate method to model non-paraxial diffractive elements. The method is based on evaluation of local field perturbations caused by abrupt surface-profile transitions. It facilitates fast parametric optimization of binary and four-level diffractive array illuminators in the non-paraxial domain of diffractive optics. Comparison with rigorous electromagnetic theory of gratings shows that optimization with the perturbation method gives accurate results if the smallest feature size in the surface profile is larger than one wavelength. Some binary designs are demonstrated using electron beam lithography.     

A study on the resolution of a terahertz spectrometer for the assessment of the porosity of pharmaceutical tablets

In this study, the resolution of a time-domain terahertz spectrometer for tablet porosity measurements was estimated using two sets of pharmaceutical tablets. One set consisted of tablets with constant thickness and with porosity as a variable. The other set consisted of tablets with variable thickness and only a relatively small change in porosity. The set with constant thickness was used for the calibration of the terahertz (THz) spectrometer for the porosity measurements, and the resolution of the terahertz spectrometer was estimated using the set with different thicknesses and slightly different porosities. It was shown that a time-domain THz spectrometer is a sensitive device that allows monitoring of minute changes in the porosity of pharmaceutical tablets by detecting the time delay of the THz pulse, which is attributable to different refractive indices within the tablet.     

Simulation of light propagation by local spherical interface approximation

A new local elementary interface approximation is introduced for the modeling of wave propagation through interfaces between homogeneous media. The incident wave and the surface profile are approximated locally by a spherical wave and a spherical surface, respectively. The wave field travels through the modulated structure according to the laws of geometrical optics, being refracted by the surface and propagating to the output plane locally as a geometric spherical wave. Diffraction theory is applied to propagate the field from the output plane onwards. We provide comparisons of the method with the thin-element approximation, the local plane-wave and interface approach, and rigorous diffraction theory using a sinusoidal surface-relief grating as an example. We illustrate the power of the new method by applying it to the analysis of a diffractive beam splitter.     

High-precision diode-laser-based temperature measurement for air refractive index compensation

We present a laser-based system to measure the refractive index of air over a long path length. In optical distance measurements, it is essential to know the refractive index of air with high accuracy. Commonly, the refractive index of air is calculated from the properties of the ambient air using either Ciddor or Edlén equations, where the dominant uncertainty component is in most cases the air temperature. The method developed in this work utilizes direct absorption spectroscopy of oxygen to measure the average temperature of air and of water vapor to measure relative humidity. The method allows measurement of temperature and humidity over the same beam path as in optical distance measurement, providing spatially well-matching data. Indoor and outdoor measurements demonstrate the effectiveness of the method. In particular, we demonstrate an effective compensation of the refractive index of air in an interferometric length measurement at a time-variant and spatially nonhomogeneous temperature over a long time period. Further, we were able to demonstrate 7 mK RMS noise over a 67 m path length using a 120 s sample time. To our knowledge, this is the best temperature precision reported for a spectroscopic temperature measurement.     

Nanowire encapsulation with polymer for electrical isolation and enhanced optical properties

Light management and electrical isolation are essential for the majority of optoelectronic nanowire (NW) devices.Here,we present a cost-effective technique,based on vapor-phase deposition of parylene-C and subsequent annealing,that provides conformal encapsulation,anti-reflective coating,improved optical properties,and electrical insulation for GaAs nanowires.The process presented allows facile encapsulation and insulation that is suitable for any nanowire structure.In particular,the parylene-C encapsulation functions as an efficient antireflection coating for the nanowires,with reflectivity down to ＜1％ in the visible spectrum.Furthermore,the parylene-C coating increases photoluminescence intensity,suggesting improved light guiding to the NWs.Finally,based on this process,a NW LED was fabricated,which showed good diode performance and a clear electroluminescence signal.We believe the process can expand the fabrication possibilities and improve the performance of optoelectronic nanowire devices.     

The effect of phosphate additives on the lubrication of rolling element bearings in a refrigerant environment

Chlorine free replacement refrigerants, HFC (hydrofluorocarbons) and HC (hydrocarbons), have shown less lubricating properties. Phosphate based additives were used to improve the lubricity with refrigerant R-134a, demonstrating positive effects. In the present paper, the ability to form lubricating film and wear of two additives, phosphate ester and acid phosphate, was investigated in a bearing test apparatus.The results show that phosphate additive in polyolester oil, in an R-134a environment, increases the lubricating film and reduce wear. Surface topography during the initial run-in changes to a more favorable profile with lower RMS angle and longer wavelengths that promote load-carrying capacity and film build-up.