Factors Affecting Impact Toughness in Stabilized Intermediate Purity 21Cr Ferritic Stainless Steels and Their Simulated Heat-Affected Zones

The correlation between simulated weld heat-affected zone microstructures and toughness parameters has been investigated in four intermediate purity 21Cr ferritic stainless steels stabilized with titanium and niobium either separately or in combination. Extensive Charpy V impact toughness testing was carried out followed by metallography including particle analysis using electron microscopy. The results confirmed that the grain size and the number density of particle clusters rich in titanium nitride and carbide with an equivalent circular diameter of 2 µm or more are statistically the most critical factors influencing the ductile-to-brittle transition temperature. Other inclusions and particle clusters, as well as grain boundary precipitates, are shown to be relatively harmless. Stabilization with niobium avoids large titanium-rich inclusions and also suppresses excessive grain growth in the heat-affected zone when reasonable heat inputs are used. Thus, in order to maximize the limited heat-affected zone impact toughness of 21Cr ferritic stainless steels containing 380 to 450 mass ppm of interstitials, the stabilization should be either titanium free or the levels of titanium and nitrogen should be moderated.     

The Role of Melodic and Temporal Cues in Perceiving Musical Meter.

A number of different cues allow listeners to perceive musical meter. Three experiments examined effects of melodic and temporal accents on perceived meter in excerpts from folk songs scored in 6/8 or 3/4 meter. Participants matched excerpts with 1 of 2 metrical drum accompaniments. Melodic accents included contour change, melodic leaps, registral extreme, melodic repetition, and harmonic rhythm. Two experiments with isochronous melodies showed that contour change and melodic repetition predicted judgments. For longer melodies in the 2nd experiment, variables predicted judgments best at the beginning of excerpts. The final experiment, with rhythmically varied melodies, showed that temporal accents, tempo, and contour change were the strongest predictors of meter. The authors' findings suggest that listeners combine multiple melodic and temporal features to perceive musical meter. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Uncover: supporting city exploration with egocentric visualizations of location-based content

This paper describes the design and evaluation of Uncover: a mobile application that supports users in exploratory pedestrian behavior to gain situational awareness of their immediate environment. The design was based on guidelines derived from foraging theory and relies on egocentric views, which keep the virtual content automatically aligned with the real world. We carried out two studies with Uncover, which examine the successfulness of design choices aiming to support tourists’ city exploration while interfering with experiencing the surroundings as little as possible. A lab study tested the effect of different marker and background types on the time to recognize the direction with most content. The designs performing best were implemented in the final prototype, and a field study analyzed the exploration behavior tourists and visitors exhibited while using it. The study showed that supporting the exploration can be improved by enabling features that are either disabled by default or not available at all in commercial map applications, like egocentric orientation of the map, providing images of venues just by pointing to their direction, and displaying clusters of several venue types.     

Covalently Mercurated Molecular Beacon for Discriminating the Canonical Nucleobases

A highly nucleobase-discriminating metalated nucleoside analogue, 3-fluoro-2-mercuri-6-methylaniline, was incorporated into an oligonucleotide molecular beacon. Fluorescence emission spectra were measured after the addition of four different complementary strands, in which the nucleobase opposite the metalated analogue varies. The fluorescence results showed a clear binding selectivity at room temperature, in the order G>T>C>A. The selectivity is based on the different affinities between the metalated nucleoside analogue and the canonical nucleobases. The synthesized probe is capable of robust discrimination between the two purine as well as the two pyrimidine bases by fluorescence at room temperature, and more sophisticated temperature analysis allows clear separation of every canonical nucleobase. The probe would, hence, be a suitable method for the detection of single nucleotide polymorphisms.     

From acacia honey monosaccharide content to a new external binary plasticizer applicable in aqueous whey protein films

Plasticizer is an essential adjuvant in food and pharmaceutical film coatings affecting the appearance, mechanical and permeation properties of the final coat. In the present study, film formation and plasticization of native whey proteins (potential future “green” coating agents for pharmaceuticals and food products), were studied with free isolated films. Special attention was paid to the effects of plasticizer, preheating and film forming solution pH on the mechanical stress–strain and moisture permeation properties of whey protein films. Glycerol, binary mixtures of fructose and glucose, and non-crystalline acacia honey were studied as external plasticizers. The type and amount of plasticizer affected the mechanical stress–strain properties of the whey protein films. A short preheating treatment of whey proteins prior to film casting resulted in mechanically strong films with a reduced elongation. The film forming properties of aqueous whey proteins could be modified by adjusting the pH above the isoelectric point of β-lactoglobulin prior to film coating. For effective plasticization, whey protein films required a high amount of monosaccharide containing plasticizer ranging from 80% to 120% (calculated from the protein weight). A new external binary plasticizer having the same ratio of monosaccharides as non-crystalline acacia honey (fructose and glucose 1.67:1) was found to be applicable in aqueous whey protein films.     

The kinetics of the Cu/Cu redox couple in deep eutectic solvents

Kinetics of electron transfer of the Cu(I)/Cu(II) redox couple at a platinum electrode has been studied with chronoamperometry, cyclic voltammetry and impedance spectroscopy in a deep eutectic solvent consisting of choline chloride and ethylene glycol. At 25 °C, the reaction was found to be quasi-reversible with a relatively high rate constant k⁰ of 9.5 ± 2 × 10⁻⁴ cm s⁻¹, and a charge transfer coefficient α of 0.25 ± 0.05. Diffusion coefficients for the Cu(I) and Cu(II) complexes were determined to be 2.7 ± 0.1 × 10⁻⁷ and 1.5 ± 0.1 × 10⁻⁷ cm² s⁻¹, respectively. The viscosity of the electrolyte was 41 ± 3 mPa s. The temperature dependency was also investigated. The activation energy of mass transfer was found to be 27.7 ± 1 kJ mol⁻¹ and that of electron transfer 39 ± 7 kJ mol⁻¹. Speciation of the Cu(I) and Cu(II) complexes was determined using UV–VIS spectroscopy, and the prevailing Cu(I) complex was found to be [CuCl₃]²⁻ and that of Cu(II) [CuCl₄]²⁻.     

On the Correlation of Effective Terahertz Refractive Index and Average Surface Roughness of Pharmaceutical Tablets

In this paper, we have studied terahertz (THz) pulse time delay of porous pharmaceutical microcrystalline compacts and also pharmaceutical tablets that contain indomethacin (painkiller) as an active pharmaceutical ingredient (API) and microcrystalline cellulose as the matrix of the tablet. The porosity of a pharmaceutical tablet is important because it affects the release of drug substance. In addition, surface roughness of the tablet has much importance regarding dissolution of the tablet and hence the rate of drug release. Here, we show, using a training set of tablets containing API and with a priori known tablet’s quality parameters, that the effective refractive index (obtained from THz time delay data) of such porous tablets correlates with the average surface roughness of a tablet. Hence, THz pulse time delay measurement in the transmission mode provides information on both porosity and the average surface roughness of a compact. This is demonstrated for two different sets of pharmaceutical tablets having different porosity and average surface roughness values.     

Modeling anisotropic light propagation in a realistic model of the human head

A Monte Carlo model capable of describing photon migration in arbitrary three-dimensional geometry with spatially varying optical properties and tissue anisotropy is presented. We use the model to explore the effects of anisotropy for optical measurements of the human head. An anisotropic diffusion equation that corresponds to our Monte Carlo model is derived, and a comparison between the Monte Carlo model and the diffusion equation solution with finite elements is given.