Towards social behavior in virtual-agent navigation

We present Social Groups and Navigation (SGN), a method to simulate the walking behavior of small pedestrian groups in virtual environments. SGN is the first method to simulate group behavior on both global and local levels of an underlying planning hierarchy. We define quantitative metrics to measure the coherence and the sociality of a group based on existing empirical data of real crowds. SGN does not explicitly model coherent and social formations, but it lets such formations emerge from simple geometric rules. In addition to a previous version, SGN also handles group-splitting to smaller groups throughout navigation as well as social sub-group behavior whenever a group has to temporarily split up to re-establish its coherence. For groups of four, SGN generates between 13% and 53% more socially-friendly behavior than previous methods, measured over the lifetime of a group in the simulation. For groups of three, the gain is between 15% and 31%, and for groups of two, the gain is between 1% and 4%. SGN is designed in a flexible way, and it can be integrated into any crowd-simulation framework that handles global path planning and any path following as separate steps. Experiments show that SGN enables the simulation of thousands of agents in real time.     

PDQ: Parallel Distance Queries for deformable meshes

This paper presents a new algorithm to efficiently maintain Bounding-Volume Hierarchies (BVHs) for fast distance queries with deformable polygon meshes using multi-core architectures. The method involves inflating the bounding volumes in an efficient manner to guarantee the enclosure of the deformable model within the BVH at all times. This is done at low additional computation and memory cost without significantly degrading the quality of the BVH and also in a fashion that allows a simple parallel implementation. Additionally, to facilitate fast queries specifically for deforming meshes, we propose a novel algorithm for the bottom-up construction of BVHs that results in much faster distance queries.     

A bio-inspired predictive sensory-motor coordination scheme for robot reaching and preshaping

This paper presents a sensory-motor coordination scheme for a robot hand-arm-head system that provides the robot with the capability to reach an object while pre-shaping the fingers to the required grasp configuration and while predicting the tactile image that will be perceived after grasping. A model for sensory-motor coordination derived from studies in humans inspired the development of this scheme. A peculiar feature of this model is the prediction of the tactile image. The implementation of the proposed scheme is based on a neuro-fuzzy module that, after a learning phase, starting from visual data, calculates the position and orientation of the hand for reaching, selects the best-suited hand configuration, and predicts the tactile feedback. The implementation of the scheme on a humanoid robot allowed experimental validation of its effectiveness in robotics and provided perspectives on applications of sensory predictions in robot motor control.     

TrajStat: GIS-based software that uses various trajectory statistical analysis methods to identify potential sources from long-term air pollution measurement data

Statistical analysis of air mass back trajectories combined with long-term ambient air pollution measurements are useful tools for source identification. Using these methods, the geographic information system (GIS) based software, TrajStat, was developed to view, query, and cluster the trajectories and compute the potential source contribution function (PSCF) and concentration weighted trajectory (CWT) analyses when measurement data are included.     

Magnebike: A magnetic wheeled robot with high mobility for inspecting complex‐shaped structures

This paper describes the Magnebike robot, a compact robot with two magnetic wheels in a motorbike arrangement, which is intended for inspecting the inner casing of ferromagnetic pipes with complex‐shaped structures. The locomotion concept is based on an adapted magnetic wheel unit integrating two lateral lever arms. These arms allow for slight lifting off the wheel in order to locally decrease the magnetic attraction force when passing concave edges, as well as laterally stabilizing the wheel unit. The robot has the main advantage of being compact (180 × 130 × 220 mm) and mechanically simple: it features only five active degrees of freedom (two driven wheels each equipped with an active lifter stabilizer and one steering unit). The paper presents in detail design and implementation issues that are specific to magnetic wheeled robots. Low‐level control functionalities are addressed because they are necessary to control the active system. The paper also focuses on characterizing and analyzing the implemented robot. The high mobility is shown through experimental results: the robot not only can climb vertical walls and follow circumferential paths inside pipe structures but it is also able to pass complex combinations of 90‐deg convex and concave ferromagnetic obstacles with almost any inclination regarding gravity. It requires only limited space to maneuver because turning on the spot around the rear wheel is possible. This high mobility enables the robot to access any location in the specified environment. Finally the paper analyzes the maximum payload for different types of environment complexities because this is a key feature for climbing robots and provides a security factor about the risk of falling and slipping. © 2009 Wiley Periodicals, Inc.     

Capillary-driven pumping for passive degassing and fuel supply in direct methanol fuel cells

In this paper we present a new concept of creating and using capillary pressure gradients for passive degassing and passive methanol supply in direct methanol fuel cells (DMFCs). An anode flow field consisting of parallel tapered channels structures is applied to achieve the passive supply mechanism. The flow is propelled by the surface forces of deformed CO₂ bubbles, generated as a reaction product during DMFC operation. This work focuses on studying the influence of channel geometry and surface properties on the capillary-induced liquid flow rates at various bubbly gas flow rates. Besides the aspect ratios and opening angles of the tapered channels, the static contact angle as well as the effect of contact angle hysteresis has been identified to significantly influence the liquid flow rates induced by capillary forces at the bubble menisci. Applying the novel concept, we show that the liquid flow rates are up to thirteen times higher than the methanol oxidation reaction on the anode requires. Experimental results are presented that demonstrate the continuous passive operation of a DMFC for more than 15 h.     

Protecting and preserving clear barrier layers for flexible packaging materials In‐line thermal evaporation of organic topcoat layer

The end market for transparent flexible barrier films is larger than for metallized films. Presently, the market is still dominated by polymeric barrier layers but the used chemicals may be harmful for the environment. An alternative would be transparent thin layers deposited by vacuum deposition techniques using reactive processes. Ceramic materials like silicon oxide or aluminum oxide are used having a film thickness of just ～10 nm, a coating uniformity of +/?5% across and along the film at a barrier performance below 2.0 sccm/m²d for oxygen transmission rate (OTR) and below 1.0 g/m²d for water vapor transmission rate (WVTR) on PET substrates. In this paper, details will be provided about the deposition processes for these barrier layers using thermal evaporation, plasma‐assisted thermal evaporation as well as deposition by electron beam evaporation. An important factor for these high barrier transparent coatings is also to withstand the downstream processes in the whole packaging stream like slitting, lamination, printing etc. One solution is to protect the barrier layers by a Topcoat. For example, off‐line deposition of lacquers is used in field but the market penetration is low due to high process and material costs. An in‐situ Topcoat deposition is a smart solution to overcome this issue saving time and costs. Such an approach will be also described in the presentation and the impact on the performance of the final package will be discussed.     

Effect of Powder Processing and Sintering Conditions on the Microstructural,Thermal, and Mechanical Properties of Reticulated Zinc Oxide Ceramic Foams

Ceramic foams are made of zinc oxide using different amounts of Sb₂O₃ and Bi₂O₃ as sintering aids. The effect of a ball milling processing of the starting powders and the sintering temperature on the microstructure and the properties of the ZnO foams is investigated. The focus is set on the evolution of the secondary phases formed within the microstructure of ZnO. A determining effect is identified in the amount of an Al₂O₃ impurity which is introduced by abrasion of the milling vessels during ball milling. Alumina is partially dissolved in a spinel α–Zn₇Sb₂O₁₂ secondary phase which is stabilized by a reduction of the unit cell volume. Remaining Al₂O₃ is incorporated into zinc oxide under formation of a defect wurtzite phase. The phase evolution is a complex function of the content of sintering aids, the Al₂O₃ impurity level and the sintering temperature. The shrinkage during sintering and the porosity evolution are correlated to the phase composition within the ZnO material. The thermal conductivity and the compressive strength of the foams are determined, normalized with respect to their porosity, and correlated to the microstructure and phase composition of the ZnO strut material.