A bio-inspired predictive sensory-motor coordination scheme for robot reaching and preshaping

This paper presents a sensory-motor coordination scheme for a robot hand-arm-head system that provides the robot with the capability to reach an object while pre-shaping the fingers to the required grasp configuration and while predicting the tactile image that will be perceived after grasping. A model for sensory-motor coordination derived from studies in humans inspired the development of this scheme. A peculiar feature of this model is the prediction of the tactile image. The implementation of the proposed scheme is based on a neuro-fuzzy module that, after a learning phase, starting from visual data, calculates the position and orientation of the hand for reaching, selects the best-suited hand configuration, and predicts the tactile feedback. The implementation of the scheme on a humanoid robot allowed experimental validation of its effectiveness in robotics and provided perspectives on applications of sensory predictions in robot motor control.     

TrajStat: GIS-based software that uses various trajectory statistical analysis methods to identify potential sources from long-term air pollution measurement data

Statistical analysis of air mass back trajectories combined with long-term ambient air pollution measurements are useful tools for source identification. Using these methods, the geographic information system (GIS) based software, TrajStat, was developed to view, query, and cluster the trajectories and compute the potential source contribution function (PSCF) and concentration weighted trajectory (CWT) analyses when measurement data are included.     

Magnebike: A magnetic wheeled robot with high mobility for inspecting complex‐shaped structures

This paper describes the Magnebike robot, a compact robot with two magnetic wheels in a motorbike arrangement, which is intended for inspecting the inner casing of ferromagnetic pipes with complex‐shaped structures. The locomotion concept is based on an adapted magnetic wheel unit integrating two lateral lever arms. These arms allow for slight lifting off the wheel in order to locally decrease the magnetic attraction force when passing concave edges, as well as laterally stabilizing the wheel unit. The robot has the main advantage of being compact (180 × 130 × 220 mm) and mechanically simple: it features only five active degrees of freedom (two driven wheels each equipped with an active lifter stabilizer and one steering unit). The paper presents in detail design and implementation issues that are specific to magnetic wheeled robots. Low‐level control functionalities are addressed because they are necessary to control the active system. The paper also focuses on characterizing and analyzing the implemented robot. The high mobility is shown through experimental results: the robot not only can climb vertical walls and follow circumferential paths inside pipe structures but it is also able to pass complex combinations of 90‐deg convex and concave ferromagnetic obstacles with almost any inclination regarding gravity. It requires only limited space to maneuver because turning on the spot around the rear wheel is possible. This high mobility enables the robot to access any location in the specified environment. Finally the paper analyzes the maximum payload for different types of environment complexities because this is a key feature for climbing robots and provides a security factor about the risk of falling and slipping. © 2009 Wiley Periodicals, Inc.     

Capillary-driven pumping for passive degassing and fuel supply in direct methanol fuel cells

In this paper we present a new concept of creating and using capillary pressure gradients for passive degassing and passive methanol supply in direct methanol fuel cells (DMFCs). An anode flow field consisting of parallel tapered channels structures is applied to achieve the passive supply mechanism. The flow is propelled by the surface forces of deformed CO₂ bubbles, generated as a reaction product during DMFC operation. This work focuses on studying the influence of channel geometry and surface properties on the capillary-induced liquid flow rates at various bubbly gas flow rates. Besides the aspect ratios and opening angles of the tapered channels, the static contact angle as well as the effect of contact angle hysteresis has been identified to significantly influence the liquid flow rates induced by capillary forces at the bubble menisci. Applying the novel concept, we show that the liquid flow rates are up to thirteen times higher than the methanol oxidation reaction on the anode requires. Experimental results are presented that demonstrate the continuous passive operation of a DMFC for more than 15 h.     

Multi-Stage Phase-Segregation of Mixed Halide Perovskites under Illumination: A Quantitative Comparison of Experimental Observations and Thermodynamic Models

Photo- and charge-carrier-induced ion migration is a major challenge when utilizing metal halide perovskite semiconductors for optoelectronic applications. For mixed iodide/bromide perovskites, the compositional instability due to light- or electrical bias induced phase-segregation restricts the exploitation of the entire bandgap range. Previous experimental and theoretical work suggests that excited states or charge carriers trigger the process, but the exact mechanism is still under debate. To identify the mechanism and cause of light-induced phase-segregation phenomena, the full compositional range of methylammonium lead bromide/iodide samples are investigated, MAPb(Br_xI_1-x)₃ with x = 0…1, by simultaneous in situ X-ray diffraction (XRD) and photoluminescence (PL) spectroscopy during illumination. The quantitative comparison of composition-dependent in situ XRD and PL shows that at excitation densities of 1 sun, only the initial stage of photo-segregation is rationalized with the previously established thermodynamic models. However, a progression of the phase segregation is observed that is rationalized by considering long-lived accumulative photo-induced material alterations. It is suggested that (additional) photo-induced defects, possibly halide vacancies and interstitials, need to be considered to fully rationalize light-induced phase segregation and anticipate the findings to provide crucial insight for the development of more sophisticated models.     

Protecting and preserving clear barrier layers for flexible packaging materials In‐line thermal evaporation of organic topcoat layer

The end market for transparent flexible barrier films is larger than for metallized films. Presently, the market is still dominated by polymeric barrier layers but the used chemicals may be harmful for the environment. An alternative would be transparent thin layers deposited by vacuum deposition techniques using reactive processes. Ceramic materials like silicon oxide or aluminum oxide are used having a film thickness of just ～10 nm, a coating uniformity of +/?5% across and along the film at a barrier performance below 2.0 sccm/m²d for oxygen transmission rate (OTR) and below 1.0 g/m²d for water vapor transmission rate (WVTR) on PET substrates. In this paper, details will be provided about the deposition processes for these barrier layers using thermal evaporation, plasma‐assisted thermal evaporation as well as deposition by electron beam evaporation. An important factor for these high barrier transparent coatings is also to withstand the downstream processes in the whole packaging stream like slitting, lamination, printing etc. One solution is to protect the barrier layers by a Topcoat. For example, off‐line deposition of lacquers is used in field but the market penetration is low due to high process and material costs. An in‐situ Topcoat deposition is a smart solution to overcome this issue saving time and costs. Such an approach will be also described in the presentation and the impact on the performance of the final package will be discussed.     

Effect of Powder Processing and Sintering Conditions on the Microstructural,Thermal, and Mechanical Properties of Reticulated Zinc Oxide Ceramic Foams

Ceramic foams are made of zinc oxide using different amounts of Sb₂O₃ and Bi₂O₃ as sintering aids. The effect of a ball milling processing of the starting powders and the sintering temperature on the microstructure and the properties of the ZnO foams is investigated. The focus is set on the evolution of the secondary phases formed within the microstructure of ZnO. A determining effect is identified in the amount of an Al₂O₃ impurity which is introduced by abrasion of the milling vessels during ball milling. Alumina is partially dissolved in a spinel α–Zn₇Sb₂O₁₂ secondary phase which is stabilized by a reduction of the unit cell volume. Remaining Al₂O₃ is incorporated into zinc oxide under formation of a defect wurtzite phase. The phase evolution is a complex function of the content of sintering aids, the Al₂O₃ impurity level and the sintering temperature. The shrinkage during sintering and the porosity evolution are correlated to the phase composition within the ZnO material. The thermal conductivity and the compressive strength of the foams are determined, normalized with respect to their porosity, and correlated to the microstructure and phase composition of the ZnO strut material.     

Controlled counter-flow motion of magnetic bead chains rolling along microchannels

We demonstrate controlled transport of superparamagnetic beads in the opposite direction of a laminar flow. A permanent magnet assembles 200 nm magnetic particles into about 200 μm long bead chains that are aligned in parallel to the magnetic field lines. Due to a magnetic field gradient, the bead chains are attracted towards the wall of a microfluidic channel. A rotation of the permanent magnet results in a rotation of the bead chains in the opposite direction to the magnet. Due to friction on the surface, the bead chains roll along the channel wall, even in counter-flow direction, up to at a maximum counter-flow velocity of 8 mm s⁻¹. Based on this approach, magnetic beads can be accurately manoeuvred within microfluidic channels. This counter-flow motion can be efficiently be used in Lab-on-a-Chip systems, e.g. for implementing washing steps in DNA purification.     

The pragmatic quality of Resources‐ Events‐Agents diagrams: an experimental evaluation

The Resources‐Events‐Agents (REA) model is a semantic data model for the development of enterprise information systems. Although this model has been proposed as a benchmark for enterprise information modelling, only few studies have attempted to empirically validate the claimed benefits of REA modelling. Moreover, these studies focused on the evaluation of REA‐based system implementations rather than directly assessing the REA‐modelled conceptual schemas that these systems are based on. This paper presents a laboratory experiment that measured the user understanding of diagrammatic conceptual schemas developed using the REA model. The theoretical foundation for the hypotheses are cognitive theories that explain pattern recognition phenomena and the resulting reduction in cognitive effort for understanding conceptual schemas. The results of the experiment indicate a more accurate understanding of the business processes and policies modelled when users recognize the REA model’s core pattern of enterprise information in the diagram. The implication for modelling practice is that the use of the REA model improves the requirements engineering process by facilitating the user validation of conceptual schemas produced by analysts, and thus helps ensuring the quality of the enterprise information system that is developed or implemented.