Measurements of the Refractive Index Increment on Hydroxyethyl Starch as a Basis for Absolute Molecular Weight Determinations

Solutions of hydroxyethyl starch are used as a blood plasma substitute. If their physiological efficiency is to be optimized, they need to be accurately characterized in terms of their molecular weight and its distribution. The absolute determination of molecular weight and molecular weight distribution by means of light scattering require a knowledge of the refractive index increment. Although numerous investigations of the refractive index increment of hydroxyethyl starch have already been published, the results vary significantly due to the use of different samples and the choice of different measuring parameters. There was therefore an urgent need to examine the extent to which the refractive index increment depends on molecular parameters, the experimental method used and the type of processing. Here it was found that different sample preparations result in different contents of solid matter, so that an exact determination of the quantity is required. Hydroxyethyl starches in the molecular weight range of about Mw = 200.000 g/mol and varying degrees of substitution between DS 0.38 and 0.50 which are regarded as optimal for clinical use give a refractive index increment of dn/dc^633nm = 0.146 = 0.005 cm³/g (solvent: H₂O/0.02% NaN₃; T = 25°C).     

Untersuchungen zu Mesityldimethylhalogensilanen als Schutzgruppenreagenzien für Alkohole

Investigation on Mesityldimethylhalosilanes as Protectiv Reagents for Alcohols The use of mesityldimethylhalosilanes as protecting reagents for steroid alcohols was investigated. The resistance of the obtained silyl ethers was tested in various media. The reaction pathway of the acidic hydrolyses of the silyl ethers is explained.     

Benchmarking advanced architecture computers

Recently, a number of advanced architecture machines have become commercially available. These new machines promise better cost performance than traditional computers, and some of them have the potential of competing with current supercomputers, such as the CRAY X-MP, in terms of maximum performance. This paper describes the methodology and results of a pilot study of the performance of a broad range of advanced architecture computers using a number of complete scientific application programs. The computers evaluated include:

• 1 shared-memory bus architecture machines such as the Alliant FX/8, the Encore Multimax, and the Sequent Balance and Symmetry
• 2 shared-memory network-connected machines such as the Butterfly
• 3 distributed-memory machines such as the NCUBE, Intel and Jet Propulsion Laboratory (JPL)/Caltech hypercubes
• 4 very long instruction word machines such as the Cydrome Cydra-5
• 5 SIMD machines such as the Connection Machine
• 6 ‘traditional’ supercomputers such as the CRAY X-MP, CRAY-2 and SCS-40.

Seven application codes from a number of scientific disciplines have been used in the study, although not all the codes were run on every machine. The methodology and guidelines for establishing a standard set of benchmark programs for advanced architecture computers are discussed. The CRAYs offer the best performance on the benchmark suite; the shared memory multiprocessor machines generally permitted some parallelism, and when coupled with substantial floating point capabilities (as in the Alliant FX/8 and Sequent Symmetry), provided an order of magnitude less speed than the CRAYs. Likewise, the early generation hypercubes studied here generally ran slower than the CRAYs, but permitted substantial parallelism from each of the application codes.     

靴套的创新开发--QualiFlex靴套

对比了QualiFlex Q型,QualiFlex QX型、QualiFlex QV型三种聚胺酯材料靴套的性能,从而说明独特的QualiFlex靴套性能,使纸幅横幅水分的均匀性得到改善,纸幅出压榨干度得以维持恒定.     

Reproducibility and the Concept of Numerical Solution

Minds and Machines - In this paper, we show that reproducibility is a severe problem that concerns simulation models. The reproducibility problem challenges the concept of numerical solution and...     

High quality double wall carbon nanotubes with a defined diameter distribution by chemical vapor deposition from alcohol

We have synthesized double wall carbon nanotubes (DWNTs) with few defects and little amorphous carbon by hot wall chemical vapor deposition (CVD) of alcohol. Catalysts for the DWNT growth were made from cobalt and molybdenum acetates. Scanning electron microscopy, transmission electron microscopy, multi frequency resonance Raman spectroscopy and optical absorption spectroscopy were used for characterization of the product with regard to DWNT yield, the nanotube diameter distribution, defect concentration and amorphous carbon content. Base pressures lower than 1 × 10⁻⁵ mbar in the CVD reactor considerably suppress defects in the DWNTs. Optimized growth conditions for DWNT formation are presented.     

The Estimation of the Molecular Weight of Polytetrafluoroethylene Based on the Heat of Crystallisation. A Comment on Suwa's Equation

Summary: The influence of number‐average molecular weight ranging from 1.4 · 10⁴ to 1.2 · 10⁶ g/mol on the thermal behaviour of polytetrafluoroethylene (PTFE) has been studied. Samples have been prepared by radiation‐induced degradation of commercial PTFE. The molecular weight has been calculated using end‐group concentration determined by infrared (IR) spectroscopy and ¹⁹F solid‐state nuclear magnetic resonance (NMR) spectroscopy. Melting and crystallisation heats were investigated by differential scanning calorimetry (DSC). The results have been discussed with respect to quantitative relationships between number‐average molecular weight and heat of crystallisation of PTFE described in the literature. The molecular weight calculated from Suwa's equation, which is often used in the literature, has been found to be too low.

Concentration of end‐groups and the molecular weight of PTFE versus the irradiation dose.     

Cell-Based Optimization of Covalent Reversible Ketoamide Inhibitors Bridging the Unprimed to the Primed Site of the Proteasome β5 Subunit

The ubiquitin-proteasome system (UPS) is an established therapeutic target for approved drugs to treat selected hematologic malignancies. While drug discovery targeting the UPS focuses on irreversibly binding epoxyketones and slowly-reversibly binding boronates, optimization of novel covalent-reversibly binding warheads remains largely unattended. We previously reported α-ketoamides to be a promising reversible lead motif, yet the cytotoxic activity required further optimization. This work focuses on the lead optimization of phenoxy-substituted α-ketoamides combining the structure-activity relationships from the primed and the non-primed site of the proteasome β5 subunit. Our optimization strategy is accompanied by molecular modeling, suggesting occupation of P1′ by a 3-phenoxy group to increase β5 inhibition and cytotoxic activity in leukemia cell lines. Key compounds were further profiled for time-dependent inhibition of cellular substrate conversion. Furthermore, the α-ketoamide lead structure 27 does not affect escape response behavior in Danio rerio embryos, in contrast to bortezomib, which suggests increased target specificity.     

In situ scanning tunneling microscopy study of selective dissolution of Au3Cu and Cu3Au (0 0 1)

We present an electrochemical study of Au₃Cu (0 0 1) single crystal surfaces in 0.1 mol dm⁻³ H₂SO₄ and 0.1 mol dm⁻³ H₂SO₄ + 0.1 mmol dm⁻³ HCl, and of Cu₃Au (0 0 1) in 0.1 mol dm⁻³ H₂SO₄. The focus is on in situ scanning tunneling microscopy experiments. The changes of the surface morphology, which are time- and potential-dependent, have been observed, clearly resolving single atomic steps and mono-atomic islands and pits. Chloride additives enhance the surface diffusion and respective morphologies are observed earlier. All surfaces have shown considerable roughening already in the passive region far below the critical potential.