On the non-destructive detection of fatigue damage in industrial aluminium alloys by positron annihilation

The average positron lifetime has been determined non-destructively and in-situ during fully symmetric push-pull fatigue experiments in the bulk material of the aluminium alloys 2024 T3 and 7075 T6 using a servo-hydraulic fatigue testing system equipped with a mobile positron beam produced by a ⁷²Se/⁷²As generator (initial activity of ≈ 0.9 MBq; average positron penetration depth ≥1 mm). Contrary to earlier investigations on stainless steel using the same experimental approach, no variation of the average positron lifetime could be observed during fatigue and neither early nor late stages of fatigue damage could be revealed. It is concluded that fatigue induced changes of the defect spectra in technologically relevant aluminium alloys are masked for the present method by saturation trapping in precipitates. A sufficiently high increase of the dislocation density and the creation of vacancy clusters must be confined to the vicinity of propagating fatigue cracks or the fatal fatigue crack. Therefore the zone with sufficient detectable fatigue damage has not enough statistical weight to modify the average positron lifetime of the aluminium alloy bulk material.     

Einfluß des Mangangehaltes auf das Ausscheidungsverhalten stickstoffhaltiger Eisenlegierungen

Einfluß von Mangangehalt und Auslagerungstemperatur auf die Ausscheidungsgeschwindigkeit des Stickstoffs und die Änderung der Koerzitivfeldstärke. Einfluß des Mangangehaltes auf die Stickstofflöslichkeit im α-Eisen und die Kinetik der Stickstoffausscheidung. Ausscheidungsversuche bei 585 °C und ihre Erörterung.     

Synthese von Heterocyclen durch C?C-Knüpfung. IV. Heterocyclensynthesen durch intramolekulare Dien-Reaktion

Synthesis of Heterocyclic Compounds by C C-bond Closure. IV. Synthesis of Heterocyclic Compounds by Intramolecular Dienreaction N-2-Cyclohexenyl-N-isopropylcinnamamide 8 cyclizes at 230°C to give the decahydronaphthindolone 9 . N-Alkyl-N-allylcinnamamides 10 analogously form 1 H-hexahydrobenzisoindolones 11 . N-Alkyl-N-allylsorbamides 14 cyclize at 150°C to 1 H-hexahydroisoindolones 15 . 15b yields the cyclic enamide 16 by alkali catalyzed shift of the double bond. Tricyclic lactames 19 and 20 are formed by thermal isomerization of N-cycloalkenylsorbamides 18a and 18b , respectively.     

Coping With Chronic Lower Back Pain: Designing and Testing the Online Tool ONESELF

A website was designed in order to help patients with chronic lower back pain (cLBP) to cope with their condition, relying on the concept of health literacy. A sample of 748 chronic or potentially chronic LBP patients were asked to regularly visit the site for a period of 12 months. The intervention was evaluated quantitatively (both preuse and postuse surveys, logfiles) and qualitatively. Users appear to have taken less painkillers than before in the period they accessed the site. Most users reported that the site contributed to increasing their knowledge, and helped them managing their back pain. Communication with doctors, family, and colleagues improved. Qualitative evaluation showed several positive effects including self‐comprehension, improvement of argumentative abilities, orientation, and self‐confidence.     

Simulation of Fluid Flow and Oscillation of the Argon Oxygen Decarburization (AOD) Process

The oscillation of argon oxygen decarburization (AOD) converters is flow related and depends on the process parameters (e.g., vessel geometry, melt fill height, process gas type and blowing rate, vessel tilting angle, as well as geometry, number, and arrangement of the side-wall nozzles). For a 120-ton AOD converter with seven submerged side-wall nozzles, plant tests, physical simulations on a 1:4 scale water model, and computational fluid dynamics simulations have been done. The investigations show that the penetration depth of an inert gas jet into the melt does not exceed approximately 0.4 m. The plumes are located close to the nozzle-side converter wall and induce a large-scale primary vortex as well as intensive surface movements; both are responsible for the oscillation. Several process mechanisms were investigated. The oscillation is highest in the last stage of the dynamic blow and is still high during the reduction stage. As the amount of inert gas increases, the vibration level also increases. Inert gas has a greater influence on the oscillation than oxygen. Tilting the converter around 8 deg clearly leads to more intensive oscillations. Increasing the blowing rate increases the forces and torques acting on the vessel, whereas the oscillation frequency remains nearly constant. A varying fill level does not influence the vibration level the same way as the blowing rate. The operational test shows, for example, that the maximum torque does not depend on the heat size when the latter varies between –8 pct and +21 pct of the nominal heat size. The water model test shows decreasing forces and torques with a rising fill level.     

Low temperature fabrication of magnesium phosphate cement scaffolds by 3D powder printing

Synthetic bone replacement materials are of great interest because they offer certain advantages compared with organic bone grafts. Biodegradability and preoperative manufacturing of patient specific implants are further desirable features in various clinical situations. Both can be realised by 3D powder printing. In this study, we introduce powder-printed magnesium ammonium phosphate (struvite) structures, accompanied by a neutral setting reaction by printing farringtonite (Mg₃(PO₄)₂) powder with ammonium phosphate solution as binder. Suitable powders were obtained after sintering at 1100°C for 5 h following 20–40 min dry grinding in a ball mill. Depending on the post-treatment of the samples, compressive strengths were found to be in the range 2–7 MPa. Cytocompatibility was demonstrated in vitro using the human osteoblastic cell line MG63.