The fatigue life of contoured cobalt chrome posterior spinal fusion rods

Intraoperative contouring of posterior rods in lumbar arthrodesis constructs introduces stress concentrations that can substantially reduce fatigue life. The sensitivity of titanium (Ti) and stainless steel (SS) to intraoperative contouring has been established in the literature; however, notch sensitivity has yet to be quantified for cobalt chrome (CoCr), which is now being advocated for use in posterior arthrodesis constructs. The goal of this study is to evaluate the sensitivity of CoCr rods to intraoperative contouring for posterior lumbar screwrod arthrodesis constructs. In this paper lumbar bilateral vertebrectomy models are constructed based on ASTM F1717-01 with curved rods (26-30 degrees total curvature) and poly-axial pedicle screws. Three types of constructs are assembled: first, 5.5 mm SS rods with SS screws (6.5 x 35 mm), second, 6.0 mm Ti rods with Ti screws (7.5 x 35 mm), and third, 6.0 mm CoCr rods with Ti screws (7.5 x 35 mm). All specimens are tested at 4 Hz in dynamic axial compression-bending with a load ratio of ten and maximum load levels of 250, 400, and 700 N until run-out at 2 000 000 cycles. Results are presented that show that the fatigue life of CoCr constructs tend to be greater than Ti constructs at all levels. At the 400 N maximum loading, CoCr lasts an average of 350 000 cycles longer than the Ti constructs. The CoCr constructs are able to sustain the 250 N load until run-out at 2 000 000 cycles but they fail at high load levels (maximum 700 N). The CoCr constructs fail at the neck of the Ti screw at high loads whereas Ti screws fail at the notch induced by contouring. Since CoCr is compatible with magnetic resonance imaging and has high static strength characteristics, the results of this study suggest that it may be an appropriate substitute for Ti.     

Spatial and functional relationships between air conduits and blood capillaries in the pulmonary gas exchange tissue of adult and developing chickens

The documented data regarding the three-dimensional structure of the air capillaries (ACs), the ultimate sites of gas exchange in the avian lung is contradictory. Further, the mode of gas exchange, described as cross-current has not been clearly elucidated. We studied the temporal and spatial arrangement of the terminal air conduits of the chicken lung and their relationship with the blood capillaries (BCs) in embryos as well as the definitive architecture in adults. Several visualization techniques that included corrosion casting, light microscopy as well as scanning and transmission electron microscopy were used. Two to six infundibulae extend from each atrium and give rise to numerous ACs that spread centrifugally. Majority of the ACs are tubular structures that give off branches, which anastomose with their neighboring cognates. Some ACs have globular shapes and a few are blind-ending tapering tubes. During inauguration, the luminal aspects of the ACs are characterized by numerous microvillus-like microplicae, which are formed during the complex processes of cell attenuation and canalization of the ACs. The parabronchial exchange BCs, initially inaugurated as disorganized meshworks, are reoriented via pillar formation to lie predominantly orthogonal to the long axes of the ACs. The remodeling of the retiform meshworks by intussusceptive angiogenesis essentially accomplishes a cross-current system at the gas exchange interface in the adults, where BCs form ring-like patterns around the ACs, thus establishing a cross-current system. Our findings clarify the mode of gas exchange in the parabronchial mantle and illuminate the basis for the functional efficiency of the avian lung.     

Elimination and accumulation of polycyclic aromatic hydrocarbons in urban stormwater wet detention ponds

The concentrations of polycyclic aromatic hydrocarbons (PAHS) in water and sediments of seven wet detention ponds receiving urban stormwater were investigated. The ponds comprised traditional wet detention ponds with a permanent wet volume and a storage volume as well as ponds that were expanded with sand filters and other means to improve the removal of micropollutants. The concentrations of sigmaPAH in the sediments varied between 6 +/- 5 and 2,222 +/- 603 ng g(-1) dry weight (mean +/- standard deviation), and were highest in the ponds with lower pond volume per catchment area and did not clearly reflect different activities in the catchments. In general, the concentrations of PAHS in the sediments decreased from inlet to outlet, especially in the systems with good conditions for sedimentation such as systems with flow perpendicular sand dikes and extensive submerged vegetation. High molecular weight PAHs were predominant in the sediments indicating the pyrogenic origin of the PAHS. There was no correlation between PAH species concentrations in water or sediments and their hydrophobicity (log K(ow)). PAH concentrations in water fluctuated in response to intensity and frequency of rain events, whereas concentrations in the sediments integrated the pollutant load over time. Pond systems expanded with sand filters and other technologies to enhance removal of micropollutants consistently had concentrations of PAHS in the effluents below the detection level.     

Microbial community composition and reactor performance during hydrogen production in a UASB reactor fed with raw cheese whey inoculated with compost

This study investigated the microbial community developed in a UASB reactor for hydrogen production and correlated it to reactor performance. The reactor was inoculated with kitchen waste compost and fed with raw cheese whey at two organic loading rates, 20 gCOD/Ld and 30 gCOD/Ld. Hydrogen production was very variable, using an OLR of 30 gCOD/Ld averaged 1.0 LH(2)/Ld with no methane produced under these conditions. The hydrogen yield was also very variable and far from the theoretical. This low yield could be explained by selection of a mixed fermentative population with presence of hydrogen producing organisms (Clostridium, Ruminococcus and Enterobacter) and other non-hydrogen producing fermenters (Lactobacillus, Dialister and Prevotella). The molecular analysis of the raw cheese whey used for feeding revealed the presence of three predominant organisms that are affiliated with the genera Buttiauxella (a low-yield hydrogen producer) and Streptococcus (a lactic acid-producing fermenter). Although these organisms did not persist in the reactor, the continuous addition of these fermenters could decrease the reactor's hydrogen yield.     

Exposure to dust, endotoxin and airborne microorganisms in wastewater sludge thermal drying units

The objective of this study was to assess workers' exposure to bioaerosols in sludge drying units. Simultaneous collection of inhalable dust and airborne biological agents was carried out using rotating cup samplers (CIP 10, Arelco). Sixteen stationary and 30 personal measurements were performed in three drying plants, during summer and winter. Microbial content of air was characterized by high amounts of Gram-negative bacteria, endotoxin, and thermophilic actinomycetes. High differences between exposure levels were observed with regard to workplaces and tasks. Dryers and conveyors in operation were closed, and the monitoring task in the dryer room was associated with low levels of personal exposure, close to background levels. Conversely, cleaning and maintenance of the dryer and conveyors required the equipment to be opened, giving significantly higher task-based personal exposure levels. The fall of dried sludge into indoor containers resulted in high emission and spreading of dust. Mean personal exposure levels to fungi were moderate or low for all tasks. Based on the results of this study, appropriate means of operational control and personal protection are being developed and implemented on sites.     

Effect of solution chemistry and operating conditions on the nanofiltration of acid dyes by a nanocomposite membrane

A composite nanofiltration membrane was developed by a poly(acrylic acid) in situ ultraviolet (UV) graft polymerization process using an ultrafiltration polysulfone membrane as a porous support, by a phase inversion method. SEM images showed that the PSf membranes had numerous finger-like pores. Atomic force microscopy (AFM) showed that the roughness of the surface was reduced by an increase in UV irradiation times. The rejections of sodium chloride and sodium sulfate were moderate and declined with the increase of concentration. We observed that by increasing UV irradiation time and nanofiltration pressure applied, retention of dyes was enhanced and in the most irradiated membrane (M-4 membrane) at 4 bars, color removal with a high rejection of about 99.80% was achieved. It was found that the separation efficiency of dyes in the mixture of salt and dyes decreased with the salt concentration due to a decrease in the Donnan effect. It was also found that by varying the pH, the membrane surface and the dyes' charges are changed, which meant that the membrane surface and dyes had different interactions at various pHs.     

Restoration of stormwater retention capacity at the allotment-scale through a novel economic instrument

Urbanisation results in changes to runoff behaviour which, if not addressed, inevitably degrade receiving waters. To date, most stormwater management has focussed on the streetscape and public open space. Given that much of the catchment imperviousness is located on private land, we developed and tested a novel economic instrument (a uniform price auction) for encouraging allotment-scale stormwater retention. We evaluated bids using an integrated environmental benefit index (EBI), based on the ability of the proposed works to reduce runoff frequency, pollutant loads and to reduce potable water demand. The uniform price auction resulted in 1.4 ha of impervious areas being effectively 'disconnected' from the stormwater system. The EBI provided an objective and transparent method of comparing bids, which varied in the type of works proposed (e.g. rainwater tank, rain-garden), the cost and the resulting environmental benefit. Whilst the pilot auction was a success, the public subsidy of works undertaken was around 85%, meaning that property owners a relatively small private benefit in the works. Future auction rounds will be revised to (i) test an EBI which is more focussed on the protection of streams (assessing changes to runoff frequency, baseflow volumes and water quality) and (ii) provide an auction process which is simpler to understand, and provides greater practical support for landholders who wish to undertake works.     

湖南省抽水蓄能电站选点规划复核报告通过审查

2011年4月26日～27日,水电水利规划设计总院会同湖南省发展和改革委员会、能源局在长沙主持召开了湖南省抽水蓄能电站选点规划复核报告审查会议。有关单位的领导、专家和代表参加了会议。会前,部分专家和代表对部分抽水蓄能电站比选     

贯彻落实中央一号文件精神 全面加快水利基础设施建设

＂十一五＂时期是我国水利发展史上极不平凡的五年,有效应对了多发并发的严重自然灾害,圆满完成了水利发展＂十一五＂规划确定的目标任务。总体上看,＂十一五＂时期是防灾减灾成效最大、水利投资规模最高、规划目标实现最好、     

武江流域暴雨洪水特性比较分析

2000-2009年10年间,武江流域发生了4场暴雨洪水:"2002·8"、"2002·10"、"2006·7"、"2008·6".就这四场暴雨洪水的天气系统成因、暴雨特性、洪水特点进行比较分析,有助于更好地掌握该地区的突发性暴雨、洪水规律,为当地人民的生产生活和防灾减灾提供参考.