The effect of matrix microstructure on cyclic response and fatigue behavior of particle- reinforced 2219 aluminum: Part I. room temperature behavior

The low-cycle and high-cycle fatigue behavior and cyclic response of naturally aged and overaged 2219/TiC/15p and unreinforced 2219 Al were investigated using plastic strain-controlled and stress-controlled testing. In addition, the influence of grain size on the particle-reinforced materials was examined. In both reinforced and unreinforced materials, the naturally aged conditions were cyclically unstable, exhibiting an initial hardening behavior followed by an extended region of cyclic stability and ultimately a softening region. The overaged reinforced material was cyclically stable for the plastic strains examined, while the overaged unreinforced material exhibited cyclic hardening at plastic strains greater than 2.5 × 10⁻⁴. Decreasing grain size of particle-reinforced materials modestly increased the cyclic flow stress of both naturally aged and overaged materials. Reinforced and unreinforced materials exhibited similar fatigue life behaviors; however, the reinforced and unreinforced naturally aged materials had superior fatigue lives in comparison to the overaged materials. Grain size had no effect on the fatigue life behavior of the particle-reinforced materials. The fatigue lives were strongly influenced by the presence of clusters of TiC particles and exogenous Al₃Ti intermetallics. formerly Research Assistant with the Department of Materials Science and Engineering, University of Michigan, Ann Arbor, MI 48109 This article is based on a presentation made in the symposium entitled “Creep and Fatigue in Metal Matrix Composites” at the 1994 TMS/ASM Spring meeting, held February 28–March 3, 1994 in San Francisco, California, under the auspices of the Joint TMS-SMD/ASM-MSD Composite Materials Committee.     

A European community source of reference materials for neutron metrology requirements

Recognizing the importance of an assured supply of reference materials of high purity for use as neutron dosimeters, the Monitor Materials subgroup of the European Working Group on Reactor Dosimetry collaborated with the Central Bureau for Nuclear Measurements, Geel, Belgium to establish a list of requirements.CBNM is organizing the availability and characterization of these materials in collaboration with specialist laboratories within the European Community. At present 12 activation and 6 fission dosimetry materials are being examined prior to certification and issue.This source of materials is expected to be of great use for reactor surveillance, interlaboratory comparisons, and other neutron metrology requirements.     

Premature termination in the midst of psychotherapy: Three psychoanalytic perspectives.

Reviews the perspectives of the drive/structural, object relations, and self-psychology models as to premature termination. A case history is presented of a man in his late twenties who ended therapy after 2.5 yrs. Examining the commonalities in the application of the 3 models, a central issue is apparent: the man's conflicts over dependency. Whether these conflicts are construed as resistance to experiencing passive feminine desires, as separation–individuation conflicts, or as fears of retraumatization by an unattuned self-object, issues of dependence are central to the patient's leaving treatment prematurely. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Very high-order microring resonator filters for WDM applications

High-order microring resonators having from 1 to 11 coupled cavities are demonstrated. These filters exhibit low loss, flat tops, and out-of-band rejection ratios that can exceed 80 dB. They achieve performance that is suitable for commercial applications.     

Effect of material and process parameters on the mechanical properties of unidirectional and multidirectional flax/polypropylene composites

Unidirectional (UD) and multidirectional (MD) flax/polypropylene composites were studied. Flax with varying retting degree and boiled flax was used as reinforcement for the UD composites and unmodified and maleic acid anhydride modified polypropylene (MAA-PP) was used as matrix. Multidirectional flax/polypropylene composites were manufactured on laboratory scale and on pilot scale. They were made from needle-punched hybrid flax/PP non-wovens. Normally retted flax as well as boiled flax was used. For the specimens made on pilot scale, a third kind of flax, namely bleached flax was also studied. The influence of different process times and temperatures on the mechanical properties of the composites was analysed. Generally, the composites have adequate good mechanical properties. The unidirectional composites of boiled flax combined with MAA-PP show the best mechanical properties. Contrary to the UD composites, flax treatment did not lead to the expected property improvements for MD composites.     

Assessing and interpreting personality change and continuity in patients treated for major depression.

Structural, mean- and individual-level, differential, and ipsative personality continuity were examined in 599 patients treated for major depression assigned to 1 of 6 forms of a 6-month pharmaco-psychotherapy program. Covariation among traits from the Five Factor model remained invariant across treatment, and patients described themselves as slightly more extraverted, open to experience, agreeable and conscientious, and substantially more emotional stable after treatment. Trait changes were only to a small extent explained by changes in depression severity. There was evidence for differential, individual-level, and ipsative stability, with stable personality profiles in terms of shape and to a lesser extent in terms of scatter and elevation. Traits remain relatively stable, except for emotional stability, despite the depressive state and the psychopharmacological interventions. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Structure of metal site in Cd-substituted His117Gly mutant of azurin with and without addition of imidazole derivatives

The present work uses 111mCd-perturbed angular correlations of gamma-rays (PAC) to investigate the structure of the metal site of the His117Gly mutant of Pseudomonas aeruginosa azurin in aqueous solution and the effect on the structure upon addition of the following exogenous ligands: imidazole, 4-methyl imidazole, 1-methyl imidazole, 2-methyl imidazole and histidine. The nuclear quadrupole interaction of cadmium bound to the mutant without addition of exogenous ligands shows a strong pH dependence with three different nuclear quadrupole interactions consistent with two pKa values at about 7.2 and 8.6 at 2 degrees C. Addition of the imidazole derivatives resulted in a significant change in the PAC spectrum showing that they coordinate. This is in accordance with observations by EPR for the same mutant with copper at the metal site [den Blaauwen, T. & Canters, G. W. (1993) J. Am. Chem. Soc. 115, 1121-1129]. However, whereas EPR and ultraviolet/visual absorption show that the characteristics of the wild-type copper protein are regained by addition of the imidazole derivatives with the exception of the possible bidentates (histidine and histamine), the comparison of the PAC results to model calculations shows that the cadmium ion must be fourfold coordinated in most cases, probably binding an additional water or hydroxide ligand. A fourfold coordination is in contrast to cadmium-substituted wild-type azurin where PAC data inferred a threefold coordination by a Cys and two His residues [Danielsen, E. Bauer, R., Hemmingsen, L., Andersen. M., Bjerrum, M. J., Butz, T., Tr?ger, W., Canters, G. W., Hoitink, C. W. G., Karlsson, G., Hansson, O. & Messerschmidt, A. (1995) J. Biol. Chem. 270, 573-580]     

Increasing Raffinate Dewaxing Efficiency

The efficiency of dewaxing of wide and narrow distillation raffinates using different mixed solvents: acetone and methyl–tert–butyl ether (MTBE), acetone and toluene, methyl ethyl ketone (MEK) and toluene, is compared. Decreasing the cutpoints from 100–140 to 50–70°C increases the filtration rate by 2 and more times and the yield of dewaxed lube oil by 2.5–5% as a function of the solvent used.