MEASUREMENT OF THE SPECIFIC SURFACE AREA OF POWDERS BY THIN LAYER WICKING

The specific surface areas (A) of different clay mineral powders were measured by both the BET method and by thin layer wicking. The values of A for the BET and the wicking experiments coincided within a few percent. Thus, the simple and inexpensive thin layer wicking approach may well suffice to obtain reliable specific surface area values for most powders. From the wicking data it is also possible to obtain a rough estimate of the average particle size.     

Use of gas plasmas to increase breakdown strengths in polycarbonatefilm/foil capacitors

It is shown that the electrical breakdown voltages of polycarbonate film/metal foil capacitors can be increased. This can be achieved by briefly exposing the metal foil in these spirally wound film foil sections to a low-pressure, low-temperature gas plasma. Exposure of tin/lead foil to a 96% CF₄/4% O₂ gas plasma for four min, for example, produced >500% increase in breakdown voltage of sealed polycarbonate capacitors     

Langzeitiges Kriechrißverhalten kennzeichnender Kraftwerksstähle

Long Term Creep Crack Behaviour of Typical Power Plant Steels The creep crack behaviour of the steels was investigated in a wide loading range up to a test duration of 40 000 h and down to a creep crack growth rate of 2 · 10^?5 mm/h with specimens of different shape and size. For steels of type l%Cr-l%Mo-0.6%Ni-0.3%V, 1%Cr-0.9%Mo-0.7%Ni-03.%V, 12%Cr-1%Mo-0.3%V-0.22%C and 12%Cr-l%Mo-0.3%V-0.20%C tested at 550°C, the creep crack growth rate could be described by the parameter C₂* with significantly smaller scatter bands than by the parameter C₁* or the stress intensity factor K_I. For steel 12%Cr-2%Ni-1%Mo tested at 450°C, parameter K_I leads to the smallest scatter band. The creep crack initiation can be described in a two-criteria diagram based on nominal stress and stress intensity factor. However the method is assumed to be over-conservative in case of increasing specimen size. As a result of several aperiodic creep fatigue crack tests, precracking under fatigue conditions gave a weak increase of the creep crack growth rate whereas by precracking under creep conditions the fatigue crack rate was strongly decreased.     

Effect of single oral dose of azithromycin, clarithromycin, and roxithromycin on polymorphonuclear leukocyte function assessed ex vivo by flow cytometry

Azithromycin was given as a single oral dose (20 mg/kg of body weight) to 12 volunteers in a crossover study with roxithromycin (8 to 12 mg/kg) and clarithromycin (8 to 12 mg/kg). Flow cytometry was used to study the phagocytic functions and the release of reactive oxygen products following phagocytosis by neutrophil granulocytes prior to administration of the three drugs, 16 h after azithromycin administration, and 3 h after clarithromycin and roxithromycin administration. Phagocytic capacity was assessed by measuring the uptake of fluorescein isothiocyanate-labeled bacteria. Reactive oxygen generation after phagocytosis of unlabeled bacteria was estimated by the amount of dihydrorhodamine 123 converted to rhodamine 123 intracellularly. Azithromycin resulted in decreased capacities of the cells to phagocytize Escherichia coli (median [range], 62% [27 to 91%] of the control values; P < 0.01) and generate reactive oxygen products (75% [34 to 26%] of the control values; P < 0.01). Clarithromycin resulted in reduced phagocytosis (82% [75 to 98%] of control values; P < 0.01) but did not alter reactive oxygen production (84% [63 to 113%] of the control values; P > 0.05). Roxithromycin treatment did not affect granulocyte phagocytosis (92% [62 to 118%] of the control values; P > 0.05) or reactive oxygen production (94% [66 to 128%] of the control value; P > 0.05). No relation between intra- and/or extracellular concentrations of azithromycin and/or roxithromycin and the polymorphonuclear phagocyte function and/or reactive oxygen production existed (P > 0.05 for all comparisons). These results demonstrate that the accumulation of macrolides in neutrophils can suppress the response of phagocytic cells to bacterial pathogens after a therapeutic dose.     

A novel metal-insulator-metal structure for field-programmabledevices

A metal-insulator-metal (MIM) capacitor structure has been developed for use in field-programmable gate arrays (FPGAs) as a voltage-programmable link (VPL). The structure relies on a combination of a refractory metal and aluminum as the lower electrode, and either a similar combination or aluminum alone as the top electrode. The insulator is prepared by means of plasma-enhanced chemical vapor deposition (PECVD). It comprises a sandwich of nearly stoichiometric silicon dioxide interposed between two like layers of silicon-rich silicon nitride. The structure has displayed characteristics desirable for use in emerging FPGA technology, including high density, low on-resistance, reduced capacitance, and low programming voltage     

Peritoneal healing after fibrin glue application: a comparative study in a rat model

The influence of fibrin glue on adhesion formation and peritoneal healing is evaluated in a prospective, randomized, controlled study. In all, 20 Wistar rats underwent microsurgical suturing of two silicone sheets, one covered with a fibrin glue barrier, to the anterior peritoneum. Each animal thus served as its own control. After 10 days, adhesions and peritoneal healing were evaluated by a blinded observer through a second-look laparotomy. Adhesions were scored using a modification of the classification of Diamond. Tissue around the silicone sheet was examined histologically and by scanning electron microscopy to evaluate the inflammatory reaction and peritoneal healing (ingrowth of blood vessels and quality of peritoneal cells). Adhesion scores for treated and control sides were (mean +/- SD) 2.89 +/- 4.68 and 6.79 +/- 9.09 (P = 0.181) respectively, and the percentage of the sheet covered by peritoneum was 26.25 +/- 31.50 and 29.21 +/- 40.21 (P = 0.226) respectively. Using the paired Wilcoxon rank test, the P values for the ingrowth of blood vessels and peritoneal healing evaluated by histology and scanning electron microscopy were 0.842, 0.692 and 0.695 respectively. We conclude that although the mean adhesion score was reduced by > 50% by fibrin glue, there is no statistically significant difference concerning adhesion formation or peritoneal healing with the use of fibrin glue.     

Characterization of spherically focused transducers using an ultrasonic measurement model approach

A new and computationally efficient method is developed for characterizing a spherically focused, ultrasonic transducer (and its accompanying test system). Procedures for determining the probe's effective radius, effective focal length, and system efficiency factor are described. Predicted responses that make use of these effective parameters are shown to correspond very well to measured responses for a number of different transducers.     

Beam test of the CsI(Tl) calorimeter for the BELLE detector at the KEK-B factory

We studied the performance of a prototype electromagnetic calorimeter for the BELLE detector at the KEK proton synchrotron for an energy range of 0.25–3.5 GeV. The prototype consisted of an array of 6 × 5 CsI(Tl) crystals with 30 cm length (16.2 radiation lengths) and about 6 cm × 6 cm cross section. The scintillation light of each CsI(Tl) crystal was read out by two large-area PIN photodiodes and charge-sensitive preamplifiers attached at the rear face of the crystal. We measured the energy and position resolution for electrons and the e/π separation for two sets of matrix configurations: one corresponded to the center and the other to the edge of the barrel calorimeter. The overall performance measured by the test proves that the prototype calorimeter is satisfactory for the use in the BELLE detector.     

Large purely refractive nonlinear index of single crystal P-toluenesulphonate (PTS) at 1600 nm

Z-scan measurements at 1600 nm on single-crystal PTS (p-toluene sulfonate) with single, 65 ps pulses gave a complex nonlinear refractive index coefficient of n₂=2.2(±0.3)×10^-12 cm²/W at 1 GW/cm² and α₂<0.5 cm/GW. This is the first highly nonlinear, organic material to satisfy the conditions imposed by the figures of merit