天然气长输管道泄漏检测方案对比

大口径、长距离天然气输送管道的泄漏检测和定位技术日益受到人们的重视。总结评价了用于天然气长输管道泄漏检测和安全预警的各种技术方案，讨论了其基本原理、适用范围、技术成熟度、优点和缺点以及工程应用情况；采用灵敏度、定位精度等7项技术指标对各种泄漏检测方法进行了评价和对比。目前，音波泄漏检测技术和分布式光纤泄漏检测技术由于具有诸多方面的优点，是近年来国内外泄漏检测技术研究的重点和热点，这两种技术已初步应用于实际，并取得了良好的效果。重点对这两种泄漏检测技术的原理、适用范围、所能达到的技术指标、优、缺点以及工程案例进行了详细讨论、分析和对比，可为我国天然气长输管道泄漏检测和安全预警系统的开发和研究提供技术依据。     

基于显微视觉的宏/微双重驱动微动台的自动标定

提出了基于压电技术的微操作系统的自动标定方法,采用混合式步进电机直接驱动的宏动平台,实现系统大行程宏动定位,安装在宏动平台上的压电陶瓷驱动的微动平台和精密光栅,实现亚微米级的分辨率和定位精度,通过以上两部分实现定位机构的全闭环反馈控制,采用显微视觉反馈获取微动台操作器在图像中的位置信息进行标定。实验结果表明:系统的动态和稳定性能良好,自动标定运算速度快,运行速度达到11 frame/s,实现了对系统的精确标定,标定精度达到0.1μm。     

Local residence time,residence revolution,and residence volume distributions in twin‐screw extruders

This work was aimed at studying the overall, partial, and local residence time distributions (RTD); overall, partial and local residence revolution distributions (RRD) and overall, partial and local residence volume distributions (RVD) in a co‐rotating twin screw extruder, on the one hand; and establishing the relationships among them, on the other hand. Emphasis was placed on the effects of the type and geometry of mixing elements (a gear block and various types of kneading elements differing in staggering angle) and process parameters on the RTD, RRD and RVD. The overall and partial RTD were directly measured in‐line during the extrusion process and the local ones were calculated by deconvolution based on a statistical theory. The local RTD allowed comparing the mixing performance of mixing elements. Also it was confirmed both experimentally and theoretically that specific throughput, defined as a ratio of throughput (Q) over screw speed (N), controlled all the above three types of residence distributions, be they local, partial or overall. The RRD and RVD do not provide more information on an extrusion process than the corresponding RTD. Rather they are different ways of representing the same phenomena. POLYM. ENG. SCI., 48:19–28, 2008. © 2007 Society of Plastics Engineers     

风管摩擦阻力的直接计算方法

提出用高精度的反映密度、黏度和温度关系的经验公式和Colebrook公式计算风管摩擦阻力系数的方法。分析和算例表明，用该方法计算，计算结果比采用常用工程设计方法更为准确，为应用计算机进行风道设计提供了直接、简便的方法。     

化灰系统的几项改造

对化灰工序设备的改进、改造的一些原因及效果情况分别进行了分析介绍。