HP700圆锥破碎机动锥的有限元分析

对HP700圆锥破碎机的主要部件动锥建立了有限元分析模型，用ANSYS软件对动锥进行了有限元强度和刚度分析，结果输出了动锥分布及变形图，对圆锥破碎机的结够设计提供了依据。     

45钢表面超音速电弧喷涂Ti-Al涂层的组织与性能研究

采用自行开发研制的超音速电弧喷设备，在45钢表面制成了钛铝合金复合涂层。并利用金相显微镜、X射线衍射仪、扫描电镜、电子探针，对涂层的成分、相结构、显微组织及其结合强度、显微硬度进行了研究。结果表明，利用超音速电弧喷涂设备，可以在45钢表面形成 度高、孔隙率低，结合强度较好和硬度高的Ti-Al合金涂层。     

高温预析出对Al-Zn-Mg系铝合金时效硬化和应力腐蚀的影响

研究了高温固溶后降温处理工艺对中强可使预析出LC52和7039铝合金的组织、时效硬化和应力腐蚀的影响。金相观察发现,高温预析出可优先在晶界处产生,并提高随后时效状态下晶界析出相的不连续分布程度,温度降低到一定程度晶内和晶界产生大量析出。合金拉伸性能和应力腐蚀结果表明,预析出在保持强度和塑性的同时,可提高抗应力腐蚀性能。而预析出温度降低,合金强度呈下降趋势。     

可持续发展战略指导下的轨道交通规划与评价

提出了轨道交通规划与评价在实施可持续发展战略过程中需要研究的问题，研究重点是轨道交通规划与评价方法体系和环境对策，研究了轨道交通规划目标的变化、轨道交通规划优化决策理论与方法、轨道交通规划中的环境影响评价、城市轨道交通网络的合理规划、城际轨道交通——客运专线/高速铁路线路基本走向的规划、轨道交通规划可持续发展的评价指标体系概念框架、轨道交通系统可持续发展的能力建设问题等，并通过实例验证了所建立的理论方法体系和模型体系；不仅进行了有关理论和方法的探讨，而且以面向实际应用为目标，开发了相应的软件系统，为轨道交     

Object-oriented DBMS requirements

The requirements on an object-oriented DBMS for management of information in a large, complex enterprise are presented. These requirements aid in the achievement of an environment characterized by data sharing, open architectures, application and data portability, and assurance of data integrity. They were defined from the point of view of a user of the DBMS; therefore they describe the expected functionality of the DBMS and do not specify the method of implementation to achieve this functionality. They encompass requirements on the data model, query and data manipulation languages, the system architecure, interfaces to the system, change management, and transaction management.     

Specification methods for material-handling control algorithms in flexible manufacturing systems

Good methods are needed to specify, test, and debug material-handling control logic. This article surveys a number of representative methods for defining and describing control algorithms for programmable material-handling equipment used in flexible manufacturing systems. The methods are evaluated with regard to their suitability for communication between people and as bases for interfaces to automatic program generators. It is concluded that no single method is entirely satisfactory. Three methods (position diagrams, function block diagrams, and operation networks) have potential to be combined into an effective hybrid approach that minimizes the need for the user to switch between various conceptual models.     

The relativistic charged particles identification method based on the goodness-of-fit ωn-criterion

The statistical method of identification of relativistic charged particles by measurements of ionization losses or time-of-flights simultaneously in some detectors of an experimental plant on the basis of the new goodness-of-fit ω_n³-criterion is considered. The method proposed has been used for the secondary particles identification from the high energy -particles fragmentation on target nuclei. The efficiency of the method is excellently illustrated by reliable separation of events (rare events as well), connected with the appearence of 1- and 2-charged particles. The comparison of the ω_n³-method with the traditional methods and with the method based on the ω_n²-criterion shows that the new method outperforms the ω_n²-method and most of the traditional ones in efficiency, but compares unfavourably with the likelihood method in power, however, the former has a number of advantages as compared with the latter.     

超低密度硬胶极压型油包水乳化钻井液在广安002-H9井的应用

在超低密度钻井液的使用方面，传统的油基钻井液和油包水钻井液存在易着火、安全性差的问题，而最近使用的美国3M公司的中空玻璃微珠聚磺钻井液又存在固控困难、钻井液费用很高等难题。为此，从选择合适的润湿反转剂和阻燃剂入手，在室内对获得的超低密度硬胶极压型油包水乳化钻井液成果配方进行了全面评价，并应用在广安002 H9井水平段欠平衡钻井中取得了良好效果。室内研究与现场应用表明，超低密度硬胶极压型油包水乳化钻井液能够很好地满足广安构造水平井段欠平衡钻井的需要。该钻井液体系具有防塌、润滑、携砂能力强，密度容易控制，钻井液单位成本合理并可重复使用，安全性好等显著特点，适合在类似广安构造的水平井段中推广应用。     

Implementing total quality management at the U.S. Department of Defense

This paper examines Total Quality Management (TQM) as defined by Dr. W. Edwards Deming including Deming's fourteen points and explains how the United States' Department of Defense (DOD) defines TQM and why TQM is necessary. It also covers how the DOD is planning on implementing TQM and the policy that has been established as guidance in the implementation process.