Cholesterol‐imprinted polymer receptor prepared by a hybrid imprinting method

A novel cholesterol‐imprinted polymer (CMIP‐H) was prepared by a hybrid method of covalent imprinting and non‐covalent imprinting. This approach involves the copolymerization of a template‐containing monomer, cholesteryl 2‐hydroxyethyl methacrylate carbonate, and a cross‐linker, followed by hydrolysis to afford a flexible guest‐binding site accompanied with the easy and efficient removal of a ‘sacrificial spacer’. The effect of solvent on the binding capacity of CMIP‐H towards cholesterol was studied, indicating that a good binding capacity towards cholesterol could be achieved in a less‐polar solvent. The binding experiments of CMIP‐H towards a series of structural analogues of cholesterol, including cholesterol acetate, progesterone and stigmasterol, were carried out in hexane. The results showed that CMIP‐H almost did not bind cholesterol acetate at all because the hydrogen‐bonding site is blocked. It exhibited a similar binding towards both cholesterol and stigmasterol, but much higher binding towards progesterone. Copyright © 2005 Society of Chemical Industry     

兰州重离子加速器大型真空室

已建成的兰州重离子加速器的真空室是一个大型整体结构的超高真空容器,直径约10m,高4.5m,重65000kg,内表面积211m~2,容积100m~3,工作真空度为5×10~(-5)Pa。采用有限单元法在计算机上用SAP-5C程序对真空室受力分析进行了计算。真空室结构材料选用瑞典Uddeholm钢厂生产的316 L 超低碳不锈钢。承制此大型容器的是航天工业部风华机器厂。由于结构庞大,首先将真空室分成八大块和几小块在工厂制造,然后运至现场焊制成一整体容器并进行机械加工。所有密封焊缝均用着色渗透液,X-射线探伤和氦质谱探漏仪进行检查和探漏。     

微型生化分析仪样品室温度控制系统研究

结合微型生化分析仪样品室的要求,设计了一种基于单片机的微型生化分析仪样品室温度控制系统.它以AT89S51为核心,采用单总线高精度数字温度传感器DS18B20对样品室温度采样,同时利用汇编语言编写温度设定与控制程序,采用半导体制冷的方式,实现了温度在25℃、30℃、32℃和37℃四个温度值的稳定,控制精度达±0.5℃.     

β－C_2S固溶体稳定的热力学研究

从热力学理论出发，利用Ｘ射线衍射定性和定量的方法，对β－Ｃ＿２Ｓ固溶体的稳定性进行了分析和研究。经热力学理论推导得出β－Ｃ＿２Ｓ稳定的热力学条件，即掺入的微量元素的化学位μ＿ｉ须小于β－Ｃ＿２Ｓ的反应自由焓△Ｇ＿β，μ＿ｉ＜△Ｇ＿β．并定量地计算出一种微量元素稳定β－Ｃ＿２Ｓ的临界掺加量为；多种微量元素对β－Ｃ＿２Ｓ的稳定性判断条件为：     

语音时域分割研究

在语音时域挑选剩余可懂度低的可用置换集合,置换集合是语音TDS系统中不可缺少的重要环节,本文给出了可用置换选取的条件、客观评价标准和方法。     

Mobility modeling, location tracking, and trajectory prediction inwireless ATM networks

Wireless ATM networks require efficient mobility management to cope with frequent mobile handoff and rerouting of connections. Although much attention has been given in the literature to network architecture design to support wide-area mobility in public ATM networks, little has been done to the important issue of user mobility estimation and prediction to improve the connection reliability and bandwidth efficiency of the underlying system architecture. This paper treats the problem by developing a hierarchical user mobility model that closely represents the movement behavior of a mobile user, and that, when used with appropriate pattern matching and Kalman filtering techniques, yields an accurate location prediction algorithm, HLP, or hierarchical location prediction, which provides necessary information for advance resource reservation and advance optimal route establishment in wireless ATM networks     

"JDS-音频化渣微机综合检测系统"的应用与效果

简要介绍“JDS-音频化渣微机综合检测系统”的工作原理和应用效果，证明使用该装置是提高炼钢操作水平的一条较好途径。     

江苏复杂断块高含水单元改善水驱效果的技术对策

在分析高含水开发单元特点的基础上,针对该阶段剩余油的品位、分布和油水关系极为复杂、挖潜难度大的技术难点,提出了适合江苏复杂断块油田高含水开发单元改善水驱开发效果的思路和工作程序、技术对策,并在真武油田高含水开发单元进行了实际应用,取得了良好的效果.     

Synthesis and aggregate formation of poly(styrenesulfonate)-b-poly(ethylene glycol)-b-poly(styrenesulfonate) triblock copolymers in aqueous solution induced by binding with aluminum ions

Summary  Well-defined water-soluble poly(styrenesulfonate)-b-poly(ethylene glycol)-b- poly(styrenesulfonate) (PSS-b-PEG-b-PSS) triblock copolymers with narrow molecular weight distribution (1.29 < M_w/M_n < 1.36) were synthesized in aqueous solution at 70 ^oC via reversible addition-fragmentation chain transfer (RAFT) polymerization. The complex formed by the PSS-b-PEG-b-PSS triblock copolymer coordinated with aluminum ion was investigated with turbidimetry, dynamic light scattering (DSL), zeta-potential, and transmission electron microscopy (TEM). The aggregation formation was based on the neutralization of the SO₃^- groups in the PSS blocks with Al³⁺ ions. The appearance, size and stability of the PSS-b-PEG-b-PSS/Al³⁺ aggregates were controlled by varying the PSS block length and degree of neutralization (DN). At DN = 0.33, where the PSS-b-PEG-b-PSS copolymer was completely neutralized with Al³⁺, the aggregate size increased with increasing PSS block length. The transition from the shrinking coil of small size to the interchain aggregates of large size was found at DN of about 0.33.     

电位滴定法研究~(99)Tc-HMDP和~(99)Tc-HEDP中Tc的氧化态

~(99)Tc-HMDP和~(99)Tc-HEDP溶液是在相应的螫合剂存在下,用过量SnCl_2还原~(99)TcO_4-制得。用标准I_2液对SnCl_2进行了剩余量电位滴定,确定了在pH～3的介质中,~(99)Tc-HMDP和~(99)Tc-HE-DP中~(99)Tc的氧化态均为+4。全部实验在N_2气流中进行。~(99)Tc-HMDP和~(99)Tc-HEDP的紫外光谱表明:在用I_2滴定的过程中,~(99)Tc只处于一种氧化态+4;将它们放置在空气中,一小时后仍较稳定。