Influence of Rare-earth Elements on Mechanical Properties of Palladium

The influence of 0.1-0.6 at.-%RE additions (RE= La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Er, Yb) on themechanical properties of Pd was studied. All above RE additions increased not only the strengthproperties at ambient temperature but also the tensile strength, creep rupture time and activation en-ergy at high temperatures, simultaneously increased the elongation of Pd. In the range of dilute con-centration, the strength properties of Pd-RE alloy enhanced linearly with RE concentration. Whenthe strength properties of Pd-RE alloys were normalized at 0.1 at.-%RE, it was found that light REelements had stronger effect on the properties of Pd than heavy RE, whereas Eu, Yb, Ce had anoma-lous effect. In all Pd-RF alloys, Pd-Eu alloy had the highest strength properties, successively Pd-Yband Pd-Ce alloy. The effect mechanisms of RE in alloy, such as purifying impurities, increasingrecrystallization temperature, refining grain size. expanding crystal lattice, increasing dislocation den-sity and decreasing stacking fault energy, forming stable RE oxidation by internal oxidation, and soon, were observed. They were strengthening sensitive factors. The influence of the factors onstrength properties and elongation of Pd was discussed.     

钢筋混凝土防撞护栏早期裂缝成因分析及预防

从设计方面、施工方面及混凝土原材料的质量及配合比设计三方面分析了钢筋混凝土防撞护栏表面早期裂缝出现的成因,并提出了相应的预防措施,以有效防止护栏表面裂缝的产生。     

Study on Numerical Simulation of Mold Filling and Solidification Processes under Pressure Conditions

The mold filling and solidification simulation for the high pressure die casting (HPDC) and low pressure die casting (LPDC) processes were studied.A mathematical model considering the turbulent flow and heat transfer phenomenon during the HPDC process has been established and paralled computation technique was used for the mold filling simulation of the process.The laminar flow characteristics of the LPDC process were studied and a simplified model for the mold filling process of wheel castings has been developed.For the solidification simulation under pressure conditions,the cyclic characteristics and the complicated boundary conditions were considered and techniques to improve the computational efficiency are discussed.A new criterion for predicting shrinkage porosity of Al alloy under low pressure condition has been developed in the solidification simulation process.     

A new DSmT combination rule in open frame of discernment and its application

A new combination rule based on Dezert-Smarandache theory (DSmT) is proposed to deal with the conflict evidence resulting from the non-exhaustivity of the discernment frame. A two-dimensional measure factor in Dempster-Shafer theory (DST) is extended to DSmT to judge the conflict degree between evidence. The original DSmT combination rule or new DSmT combination rule can be selected for fusion according to this degree. Finally, some examples in simultaneous fault diagnosis of motor rotor are given to illustrate the effectiveness of the proposed combination rule.     

多资源公平调度器在Hadoop 中的实现

目前Hadoop的作业调度算法都是将系统中的多类资源抽象成单一资源,分配给作业的资源均是节点资源中固定大小的一部分,称为插槽。这类基于插槽的算法没有考虑到系统多资源的差异性,忽略了不同类型作业对资源的不同需求,因此导致系统在吞吐量和平均作业完成时间上性能低下。本文研究了多资源环境下公平调度算法在Hadoop中的实现,设计了一种多资源公平调度器MFS(Multi-resource Fair Scheduler)。MFS采用了DRF(Dominant Resource Fairness)调度思想,使用需求向量来描述作业对各类资源的需求,并按照需求向量中各资源的大小给作业分配资源。MFS能更加充分有效地使用系统的各类资源,并能满足不同类型作业对资源的不同需求。实验表明相比于基于插槽的Fair Scheduler与Capacity Scheduler,MFS提高了系统的吞吐量,降低了平均作业完成时间。     

Kaman协议的形式化验证

Kaman协议是移动Ad Hoc网络安全认证机制,然而,协议设计者未对该协议的安全性作严格的形式化分析。协议复合逻辑PCL是验证协议安全属性的形式化方法,PCL逻辑能够简化协议安全分析过程。本文在协议复合逻辑PCL中描述Kaman协议并分析Kaman协议的安全属性,证明Kaman协议能够实现其安全目标。     

NCS中实时数据库的多版本并发控制研究

实时数据库是网络控制系统(NCS)的重要组成部分,是整个控制系统中数据交换的平台。本文在原有的两段锁机制的基础上,提出一种适用于多版本的两段锁并发控制方法。简述数据多版本给现场控制带来的不利影响。分析在数据多版本的情况下,现场事务的可串行性,用多版本并发控制协议MV2PL解决多版本并发控制问题。用简化的多版本并发协议2V2PL说明它的正确性,并通过实例表明该协议是可行的。     

将Word文档自动转换成PDF格式的编程实现

在日常工作中,人们普遍使用微软Word编辑器制作文本文档,而PDF格式文档以其平台独立性和安全性等特点备受文档管理和发布者青睐。本文介绍Word文档到PDF文档转换的手工操作方法,同时详细论述编制转换组件,建立不同应用环境下的应用程序的过程,实现MS Word格式文档向PDF格式文档的自动、批量转换。     

成都市第一城市污水污泥处理厂工程设计及体会

城市污水处理厂所产生污泥的处理处置问题备受广泛关注,结合成都市第一城市污水污泥处理厂一、二期工程工艺选择,介绍了该厂污泥的性质、污泥"半干化+焚烧"的工艺流程、主要设计参数和概况,同时简要地介绍了污泥处理厂的运行状况及工程设计体会.