Study on Adsorption of Rare Earth Elements by Kaolinite

Rareearthelements (REEs)werewidelyappliedtotracingthesourcesofmaterialsandtostudyingtheirevolutionprocessesinmanyfieldsofearthscienceinconsiderationoftheirsimilarityandsystematicdiffer enceinchemicalproperties .Furthermore ,lanthanidesarebothimportantprod…     

Air oxidation behavior of nitrogen ion implanted zircaloy-4 at 500 °C

Journal of Materials Science -     

周铣加工表面形貌仿真新算法

考虑主轴偏心，基于周铣过程中刀具切削刃上任意点与工件相对运动的轨迹方程和周铣过程几何特征，构造出可以求解周铣加工表面上任意一点形貌高度值的三维表面形貌仿真算法，并给出了相应的仿真算例。该算法无需对刀齿进行微段离散，并且不依赖于工件网格划分，加工表面上任意一点形貌高度值的计算次数等于刀具齿数，具有通用性好、运算速度快、结果准确度高的特点。     

MRPⅡ在我国企业的实践和再认识

对MRPⅡ实际中的问题进行总结,从MRPⅡ的核心和管理思想、它与深化改革、强化管理的关系等方面再认识MRPⅡ.旨在推动我国企业进一步完善和发展MRPⅡ,加快企业网的建设和我国的信息化进程.     

苛性碱分解高钙黑钨精矿试验研究

研究了在高温，高压（Ｔ＝１８０℃，ｐ＝１．０～１．２×１０＾６Ｐａ）的加磷酸盐情况下，苛性碱分解高钙黑钨精矿的工艺，试验表明，高钙钨精矿的分解率（η）可达９８％以上，钨酸钠溶液中Ｐ／Ｗ比值也能满足工艺要求，与常温，常压工艺相比苛性碱的用量降低，分解时间缩短。     

Effect of H_2 dilution on the structure and properties of nc-CrC/a-C:H coatings deposited by a hybrid beams system

Nanocomposite Cr C/hydrogenated amorphous carbon(nc-CrC/a-C:H) coatings were deposited by a hybrid beams system comprised of a hollow cathode ion source and a cathodic arc ion-plating unit with varying H_2 flow rates. The influences of H_2 flow rates on the morphologies, microstructures, and properties of the coatings were systematically studied. The morphologies and microstructures of the coatings were characterized by SEM, AFM, XPS, Raman spectroscopy, GIXRD, and HRTEM. The mechanical and tribological properties were measured by a nano-indenter, scratch tester, and ball-ondisk tribometer. The wear tracks were evaluated using 3D profilometer, optical microscope, and EDS analysis. It has been found that a moderate H_2 flow rate can effectively smooth the surface, enlarge the fraction of a sp~3 bond, and improve the properties. The coating exhibits the highest hardness and elastic modulus at the H_2 flow rate of 40 sccm. A superior combination of adhesion strength,friction coefficient, and wear resistance can be achieved at the H_2 flow rate of 80 sccm.     

IR—UT钢水升温工艺实验

以苏州钢铁厂钢包为原型，通过水模和中频感应炉实验，确定了ＩＲ－ＵＴ－１６型精炼装置的设备参数和工艺参数，证实了采用Ａｌ或Ｓｉ－Ｃａ－Ｂａ－Ａｌ作发热剂进行钢水吹氧升温的可行性，钢水成分可满足小方坯连铸的要求。     

江西社会消费品零售总额与GDP的数学模型分析

社会消费品零售总额反映国内消费支出情况,对判断国民经济现状和前景具有重要的指导作用。社会消费品零售总额提升,表明消费支出增加,经济情况较好;社会消费品零售总额下降,表明经济景气趋缓或不佳。研究江西社会消费品零售总额与GDP的数学模型关系,具有一定现实意义。     

关于细胞神经网络无性模板的设计

本文以连通片检测器无性模板的设计为例，给出了细胞神经网络中无性模板的设计方法及连通片检测器无性模板中各元素的数值范围。