VB与Matlab混合编程在梯度胶片制作中的应用

在梯度胶片制作系统的设计中,为了完成制胶系统上位机数据计算、图形显示、系统管理软件的设计,采用Matlab函数根据采样数据合出步进电机进给控制曲线,结合VB将曲线和数据显示在人机交互界面上,将所计算的参数提供给下位控制系统,系统通过曲线插补计算对步进电机进行控制来完成胶片制作.经实践检验,这种方法所设计的监控程序功能完善、界面良好、操作方便.     

油气井钻进钻铤进动特性仿真研究

油气井钻进破岩过程发生于地下几千米,难以获取井底钻具组合的运动状态.井底钻具组合与岩石的相互作用产生多种形式的振动及振动的耦合.为进一步研究破岩引发钻进中振动的产生机理,建立了井底钻具组合钻铤段非线性动力学模型,通过数值仿真,分析了破岩过程中转速、钻井液、井底钻具组合偏心距、摩擦等对钻铤段旋转进动的影响.数值研究表明,系统参数的变化导致井底钻具组合进动轨迹的多样性和不可预测性;井底钻具组合受到外力作用,导致钻铤进动出现混沌;钻进过程中钻铤与井壁间会发生周期性碰摩现象,为研究钻进引发钻柱黏滑振动提供新的研究思路.     

Effects of CaO and Na<Subscript>2</Subscript>CO<Subscript>3</Subscript> on the reduction of high silicon iron ores

The effects of CaO and Na₂CO₃ on the reduction of high silicon iron ores at 1 250 °C were studied. The experimental results showed that the metallization rate was significantly hindered by the addition of CaO and Na₂CO₃, particularly at the early stage of roasting, compared to the rate without additives. In the absence of additives, iron oxides were quickly reduced to metallic iron, and fayalite was difficult to form. When CaO and Na₂CO₃ were added, the low reducible iron-containing silicate compounds formed and melted, subsequently retarding the metallization process. The inhibition of Na₂CO₃ was more noticeable than that of CaO, and higher Na₂CO₃ doses resulted in stronger inhibition of the increased metallization rate. However, when Na₂CO₃ was added prior to CaO, the liquid phase formed, which facilitated the growth of the metallic phase. To reinforce the separation of the metallic phase and slag, an appropriate amount of liquid phase generated during the reduction is necessary. It was shown that when 10% CaO and 10% Na₂CO₃ were added, a high metallization rate and larger metallic iron particles were obtained, thus further decreasing the required Na₂CO₃ dosage.     

Improved visible transparency of SIO<Subscript>2</Subscript>/ZNO:AL /CEO<Subscript>2</Subscript>-TIO<Subscript>2</Subscript>/SIO<Subscript>2</Subscript> multilayer films with high UV absorption and infrared reflection rate

New visible transparent, UV absorption, and high infrared reflection properties have been realized by depositing multilayer SiO₂/ZnO: Al/CeO₂-TiO₂/SiO₂ films onto glass substrates at low temperature by radio frequency magnetron sputtering. Optimum thickness of SiO₂, ZnO: Al (ZAO) and CeO₂-TiO₂ (CTO) films were designed with the aid of thin film design software. The degree of antireflection can be controlled by adjusting the thickness and refractive index. The outer SiO₂ film can diminish the interference coloring and increase the transparency; the inner SiO₂ film improves the adhesion of the coating on the glass substrate and prevents Ca²⁺, Na⁺ in the glass substrate from entering the ZAO film. The average transmittance in the visible light range increases by nearly 18%-20%, as compared to double layer ZAO/CTO films. And the films display high infrared reflection rate of above 75% in the wavelength range of 10-25 μm and good UV absorption (> 98%) properties. These systems are easy to produce on a large scale at low cost and exhibit high mechanical and chemical durability. The triple functional films with high UV absorption, antireflective and high infrared reflection rate will adapt to application in flat panel display and architectural coating glass, automotive glass, with diminishing light pollution as well as decreasing eye fatigue and increasing comfort.     

重力异常处理中小子域滤波法的改进

在重力资料处理中,小子域滤波法会导致异常边界严重失真。为了弥补这一缺陷,提出一种改进的小子域滤波法,通过对子域剖分方式的改进以达到提升计算速度和控制异常边界失真的效果。通过模型试验对该方法的可行性进行验证,试验结果表明:重力异常数据利用改进的小子域滤波法多次迭代计算后,可以较好地反映地质体边界的分布情况,失真现象得到明显抑制;利用该方法描绘出虎林盆地断裂分布图,得到了25条断裂的分布情况,与已有的地质资料存在很好的对应关系。     

铝合金电阻点焊预压接触分析

为了探究铝合金电阻点焊的接触压力分布及初始导电区域,利用ABAQUS软件建立球面形电极条件下的预压接触二维轴对称有限元模型并对模型施加不同的电极压力.在可视化模块中得到了各个接触面上接触压力随载荷变化曲线、电极上的轴力分布云图及工件内的有效塑性应变云图.有限元分析结果表明,各接触面上的接触压力分布是不均匀的,电极-工件间的接触压力受电极球形端面轴向应力分布影响;工件间接触压力与材料所处状态有关;随着电极压力的增大,工件间接触半径呈线性增长.说明电阻点焊时可以通过选取不同截面的电极来改善接触压力的分布,进而改变初始导电区域的大小.     

资水流域短期/长期综合干旱指数的构建与应用

干旱评估作为干旱灾害监测与防御的一个重要方面,如何准确评价并预测研究区域的旱情是当前研究的热点和难点。基于资水罗家庙以上流域的水文、气象资料,分别计算具有不同时间尺度的干旱指数值,利用主成分分析方法,分别研制基于水文模型的短期/长期综合干旱指数并探讨了其在资水流域的适用性。研究结果表明:短期综合干旱指数和长期干旱指数均能很好识别并评价资水流域的历史干旱。研究成果可为长江流域及其他流域建立和健全干旱监测与预警系统提供重要参考。     

高铬铸铁的正火组织与性能研究

研究正火温度对新型高铬铸铁组织、硬度(HRC)及冲击韧性的影响。实验结果表明高铬铸铁在800~950℃正火时,其组织由珠光体+少量铁素体+网状共晶碳化物组成;在1 000~1 050℃正火时,碳化物溶解析出,珠光体球化,得到铁素体基体上分布的粒状碳化物+共晶碳化物+少量珠光体,硬度略有降低;在1 100~1 150℃正火时,共晶碳化物溶解得更多,冷却过程中奥氏体中析出弥散碳化物,冷却后得到马氏体(过饱和铁素体)基体上弥散碳化物+共晶碳化物,硬度明显升高,并在1 150℃时硬度达到最大值,在800~1 150℃正火加热温度范围内,冲击韧性在4.2~4.7 Jcm2之间波动,总体变化不大。     

一种改进的基于全局最小能量泛函光流算法

在大位移、非刚性运动目标的复杂场景下,针对全局能量泛函过平滑导致目标形状严重丢失及大位移运动目标光流计算精度降低的问题,提出了一种全变分正则化(ROF)模型预处理输入视频帧,对图像的大尺度特征和图像变化的细小部分进行了分析.采用双三次插值法初始化亚像素层的光流矢量,设计了一种自适应邻域修正法,对光流矢量异常值进行了修正.实验结果表明:相比于传统Horn-Schunck光流算法与金字塔Horn-Schunck光流算法,光流的平均角误差和平均终点误差分别平均减少了87.86%,58.51%和89.44%,58.99%,有效地提高了算法精度.     

离子选择电极在水土流失养分监测中的应用

水土流失径流养分监测通常采用野外采集后进行实验室分析的方法,操作复杂。为验证离子选择电极这种可快速测量养分的方法在水土流失监测中的可靠性,以氨氮离子选择电极为例,与传统纳氏试剂分光光度法进行比较,在准确度、抗离子干扰及坡面径流迁移规律等方面进行实验。结果表明:电极法测定范围最大值为1000 mg/L,分光光度法测定范围最大值为2 mg/L;用幂函数模型模拟坡面径流氨氮迁移规律时,电极法测定值的拟合系数为0.9537,分光光度法的为0.9305。在95%的置信水平上,两方法结果并无显著性差异,而电极法的标准偏差小,其结果更接近标准值。