Thermal lens and beam properties in multiple longitudinally diodelaser pumped Nd:YAG slab lasers

The focal length of the thermal lens and the beam quality factor (beam propagation factor) M² for a multiple longitudinally diode pumped slab laser is deduced for pump and output powers up to 16 and 4.5 W, respectively. Due to the geometry of the arrangement, a stronger thermal lens is observed in the plane with the larger pump spot radius as predicted by an analytical model for slab geometries. In addition, the second stable zone of an asymmetric resonator is found to be advantageous for improved beam properties at high output powers     

Psychosocial issues in breast cancer

Over the past year, increasing research attention has been devoted to the issue of women at increased risk of developing breast cancer. These articles focus on a range of issues from recruiting high-risk women into breast cancer trials to recommendations for assessment and counseling women with a family history of breast cancer. In addition, continuing research attention has focused on quality of life, symptom management, and articles related to physician-patient communication. This review summarizes and critiques publications in these areas, and it includes articles reviewing the status of research in psychosocial oncology.     

Sleep and breathing disorders in patients with brain stem lesions

Most information about the structures within the brain stem that modulate respiration and sleep are gathered from animal experiments. Therefore we examined 10 patients several weeks after an infarction of the brain stem by means of polysomnography and tested the chemosensitive drives of respiration. None of these patients complained about symptoms of sleep disordered breathing. In each case polysomnographic measurements and ventilatory response curves revealed pathologic findings. The respiratory response to CO2 was diminished or completely abolished in each patient. In some cases hypoventilation or disturbances of the respiratory rhythmicity could be seen. In several cases missing REM sleep, sleep fragmentation or the reduction of slow wave sleep were observed. The study indicates that on the base of results from animal research the comparison of morphological and pathophysiological data is helpful to gain a better understanding on the coupling of the respiratory system with sleep at the brain stem level as well as on the pathomechanism of sleep related breathing disorder.     

The Importance of Therapeutically Targeting the Binary Toxin from Clostridioides difficile

Novel therapeutics are needed to treat pathologies associated with the Clostridioides difficile binary toxin (CDT), particularly when C. difficile infection (CDI) occurs in the elderly or in hospitalized patients having illnesses, in addition to CDI, such as cancer. While therapies are available to block toxicities associated with the large clostridial toxins (TcdA and TcdB) in this nosocomial disease, nothing is available yet to treat toxicities arising from strains of CDI having the binary toxin. Like other binary toxins, the active CDTa catalytic subunit of CDT is delivered into host cells together with an oligomeric assembly of CDTb subunits via host cell receptor-mediated endocytosis. Once CDT arrives in the host cell’s cytoplasm, CDTa catalyzes the ADP-ribosylation of G-actin leading to degradation of the cytoskeleton and rapid cell death. Although a detailed molecular mechanism for CDT entry and host cell toxicity is not yet fully established, structural and functional resemblances to other binary toxins are described. Additionally, unique conformational assemblies of individual CDT components are highlighted herein to refine our mechanistic understanding of this deadly toxin as is needed to develop effective new therapeutic strategies for treating some of the most hypervirulent and lethal strains of CDT-containing strains of CDI.     

Crystal structure of TNF-alpha mutant R31D with greater affinity for receptor R1 compared with R2

Crystal structures have been determined of recombinant human tumor necrosis factor-alpha (TNF-alpha) and its R31D mutant that preferentially binds to TNF receptor R1 with more than seven times the relative affinity of binding to receptor R2. Crystals of the wild-type TNF were of space group P4(1)2(1)2 and had unit cell dimensions of a = b = 94.7 and c = 117.4 A. Refinement of the structure gave an R-factor of 22.3% at 2.5 A resolution. The crystals of TNF R31D mutant diffracted to 2.3 A resolution, and were of identical space group to the wild type with unit cell dimensions of a = b = 95.4 and c = 116.2 A, and the structure was refined to an R-factor of 21.8%. The trimer structures of the wild-type and mutant TNF were similar with a root mean square (r.m.s.) deviation of 0.56 A for Calpha atoms; however, the subunits within each trimer were more variable with an average r.m.s. deviation of 1.00 A on Calpha atoms for pairwise comparison of subunits. Model complexes of TNF with receptors R1 and R2 have been used to predict TNF-receptor interactions. Arg31 in all three subunits of wild-type TNF is predicted to form an ionic interaction with the equivalent glutamic acid in both receptors R1 and R2. Asp31 of the TNF R31D mutant is predicted to interact differently with the two receptors. The side chain of Asp31 in two subunits of the TNF mutant is predicted to form hydrogen bond interactions with Ser59 or Cys70 of R1, while it has no predicted interactions with R2. The loss of three strong ionic interactions of Arg31 and the electrostatic repulsion of Asp31 with Glu in the receptors is consistent with the reduced binding of the R31D mutant to both receptors relative to wild-type TNF. The replacement of these ionic interactions by two weaker hydrogen bond interactions between Asp31 of the R31D mutant and R1, compared with no interactions with R2, is in agreement with the observed preferential binding of the R31D mutant to R1 over R2. Analysis of the structure and function of receptor-discriminating mutants of TNF will help understand the biological role of TNF and facilitate its use as an antitumor agent.      

Untersuchung des einflusses molekularer parameter auf morphologie und eigenschaften von polyethylenen niedriger dichte

Based on the example of PE-LD grades and on model substances obtained by preparative fractionation (fractions in the molecular weight range M?_w = 1.2 ? 390·10⁴ g/mol), comprehensive investigations regarding the problems of structure/properties have been carried out. The correlations of M?_w with 15 physical and application technological perameters have been investigated taking into account the reaction mechanism during the manufacturing of PE-LD in the tubular and agitated autoclave reactor, resulting in the formation of so-called primary structure perameters M?_n, M?_w, molar mass distribution, short chain branching and long chain branching. For the interpretation of the results, among other factors, also the morphological conditions have been taken into consideration, which in connection with the molecular parameters reveal — for specific M?_w-ranges — strong changes and saturation ranges, resp., for the physical and application technological properties.     

Preparation and properties of high molecular weight poly(1-germa-) or poly(1-sila-cis-pent-3-enes)

High molecular weight poly(1,1-dimethyl-1-germa-cis-pent-3-ene), poly(1,1-diphenyl-1-germa-cis-pent-3-ene), poly(1,1-dimethyl-1-sila-cis-pent-3-ene), and poly(1-methyl-1-phenyl-1-sila-cis-pent-3-ene) have been prepared. The thermal stability of these polymers is found to increase with their molecular weight.     

In situ ellipsometric study of a palladium catalyst during the oxidation of methane

Ellipsometry is used to follow the growth of a PdO layer on the surface of a thick Pd-film catalyst during methane oxidation at 500°C. The oxide layer that develops under rich conditions (excess CH₄) is quite porous and roughens with time. Little CO is formed during this period, but the CO₂ formation rate increases until spontaneous oscillations develop, which correlate with changes in the ellipsometric data. These changes indicate that the porous oxide rapidly converts to a metal-rich state, which has decreased catalytic activity, and then slowly reoxidizes.     

Liquid spouting of pulp fibers in a conical vessel

Pulp fibers can be spouted in water in a conical vessel. The entities which are spouted are fiber flocs rather than individual fibers. Synthetic fibers, which do not flocculate, cannot be spouted. For comparison, rigid spherical particles were spouted with water in the same conical vessel. Liquid spouting of rigid particles was similar to gaseous spouting. For pulp spouting, the minimum spouting velocity is proportional to the mass of fibers in the bed and inversely proportional to the diameter of the inlet. For rigid particles, the minimum spouting velocity is proportional to the height of the bed and inversely proportional to the square of the diameter of the inlet. A model for the minimum spouting velocity was developed for pulp spouting.