New intramolecular effect observed for polyesters: An anomeric effect

A series of polyesters was prepared to evaluate hydrolytic stability as a function of cyclohexyl dibasic acid content. The three cyclohexyl dibasic acids: 1,2; 1,3; and 1,4 were formulated into polyesters with two glycols. The proportion of cis and trans isomers was evaluated via ¹H NMR. The hydrolytic stability of short chain polyesters was evaluated in an acetone/water mixture which solubilized the polyesters to mimic oligoester behavior within a thermosetting polyester coating environment. The rate of hydrolysis was monitored by acid titration and corroborated by GPC. Surprisingly, 1,2-cylohexyl diacid-based polyesters were robust, and 1,3-cyclohexyl diacid-based polyesters were the most susceptible to hydrolysis. Evidently, a 1,2-anchimeric effect for cyclohexyl dibasic acid polyesters was not an important consideration, while the 1,3-cyclohexyl ester interaction was. Consequently, an anomeric effect was proposed. Presented at the 81st Annual Meeting of the Federation of Societies for Coatings Technology, November 12–14, 2003, in Philadelphia, PA.     

一种控制盐层段井眼闭合率的钻井液密度新公式

针对钻井过程中钻遇的盐层段井眼蠕变缩径问题,利用弹塑性力学理论,蠕变本构方程采用Heard蠕变方程,在平面应变和均匀地应力假设下,推导出控制井眼收缩的钻井液密度新公式,该公式与前人推导的公式不同。通过理论分析,指出产生差异的根本原因在于蠕变应力差(极坐标下表示的径向应力与切向应力之差)公式的推导上,用有限元法计算结果对理论公式进行检验,证明是可行的。对文中的力学模型采用有限元法建模、求解,利用求解结果对各应力差公式进行验证,得出:根据文中公式计算结果与有限元法计算结果完全一致,而据前人公式计算结果偏离有限元计算值较大,从而间接证明了该钻井液密度新公式的推导更严密,更准确。     

数字振荡器的实现原理与仿真编程

鉴于数字信号处理中的实时应用问题，探讨了数字滤波器的实时实现原理，包括离散时间网络结构的作用和离散时间信号处理的特点，重点介绍了实时应用中实现数字滤波器的基本思想，运用MATLAB和所导出的通用数字振荡器的系统函数对一个非正弦数字振荡器进行了仿真编程，还讨论了有关实时处理的几个重要的系统性质，表达了作者对于当前学习和应用数字信号处理方法的观点。     

冷库多台冷风机电热融霜时间与温度双重自动控制方案

从节能和可靠运行的角度提出冷库多台冷风机电热融霜时间与温度双重自动控制方法.     

聚乙烯管材的国内外发展及应用

介绍国内外PE管材的现状和发展前景、以及管材专用料的生产、研究情况     

谐振式力传感器对其晶振频率稳定度的要求

为了寻找石英晶振频率稳定度对传感器影响的判据,根据石英谐振式力传感器的灵敏度阈值和量程与晶体的相关常数及结构参数间的关系,导出了反映谐振式力传感器研究水平的指标参数与晶体结构参数及晶振频率稳定度之间的关系式,为传感器的研究提供了依据。例如,欲制作量程阈值比达到105量级的传感器,所用晶振的频率稳定度必须优于108。     

基于偏振光干涉仪的Interleaver解复用器实验研究

为实现更窄信道间隔的密集波分复用 ,提出了一种基于偏振光干涉仪的新型Interleaver解复用器 ,分析了结构组成与基本工作原理 ,对其进行了初步的测试实验 ,该器件所分开的DWDM系统两组波长功率均衡 ,隔离度分别为 1 0 6dB和 1 4 6 4dB ,- 1dB带宽分别为 0 7nm和 0 4nm。     

Nickel and chromium cycles: Stocks and flows project part IV

Nickel and chromium are essential ingredients in alloys increasingly important for energy-efficient, environmentally friendly modern technology. Quantitative assessment of the flows of these metals through the world economy from resource extraction to final disposal informs resource policy, energy planning, environmental science, and waste management. This article summarizes the worldwide technological cycles of nickel and chromium in 2000. Stainless steel is the major use of these metals, but they serve numerous other special needs, as in superalloys for high-temperature service, as plating materials, and in coinage. Because they are used primarily in alloys, novel recycling issues arise as their use becomes more widespread. “... the great New York and St. Louis double track, nickel plated railroad...” — Norwalk, Ohio, Chronicle 10 March 1881 announces arrival of surveyors for the future Nickel Plate Railway “Later [1911] I formed an alloy of Iron and Chromium, which showed remarkable resistance to rust and tarnish ... [It was] rediscovered by an Englishman named Brearley, in 1914.” —Elwood Haynes to Stephen F. Roberts, 17 January 1925     

油基钻井液的推广及循环利用

针对普通水基钻井液在钻进中强、强水敏性油藏时会造成储层污染、产量降低的问题,指出了油基钻井液在钻进该类油藏时的优势和其成本高、对生态环境有污染的缺点。为了大面积推广应用油基钻井液,重点介绍了油基钻井液的特性和稳定性影响因素,并通过室内评价证明了油基钻井液在油层保护中的良好效果,着重阐述了油基钻井液在王庄油田的现场应用情况,并探讨了油基钻井液的循环利用技术。研究结果表明,油基钻井液不仅具有良好的油层保护效果,而且具有较好的社会经济效益。     

Influence of the silicon surface treatment by plasma etching and scratching on the nucleation of diamond grown in HFCVD - a comparative study

A comparative study for the nucleation of diamond was carried out using surface treatment like (i) surface scratching with 1 μm diamond paste and (ii) surface etching using chlorine plasma at different RF powers (50, 100 and 150 W). Atomic force microscopic study shows variation in roughness from 31 nm to 110 nm. Scratching results in random scratches, whereas plasma etches a surface uniformly. Scanning electron microscopic observations show well faceted crystallites with a predominance of angular shaped grains corresponding to 〈100〉 and 〈110〉 crystallite surfaces for the scratched as well as plasma etched substrate. Surface etching at 150 W plasma power results in a better growth in comparison with 50 and 100 W plasma powers. Chlorine-radical is found responsible for the changes in the growth morphology. Raman spectroscopy shows a sharp peak at 1,332 cm⁻¹ and a peak at ∼1,580 cm⁻¹ for both samples.