3ds max中创建Camera Match点方法的探讨

通过创建一辅助长方体并对其进行变换，用其变换后的方向来反映3ds max中背景图像的透视方向，并利用其对场景与背景图像匹配的Camera Match点进行定位，为进行摄像机匹配提供了一种方便快捷、实用的新途径。     

铁固体超强酸催化剂的改性及结构特征

用沉淀法在一定条件下制备了由硫酸根促进的以氧化铁为主要活性组分的铁固体超强酸催化剂 ,并选择了氧化镧与氧化锆作为辅助金属氧化物添加剂进行了改性。用红外光谱测定了其分子结构 ,用流动气相色谱法测定了催化剂的比表面积和孔径结构。结果表明 ,铁固体超强酸催化剂的酸强度H0 ≤ - 1 4 5 2 ,比表面积为 1 2 4 8m2 ·g- 1 ,孔径集中在 1 0～ 2 0nm ,分子为桥式双配位结构。经改性后的催化剂用于乙酸丁酯的合成反应 ,有较高的催化活性和使用寿命。     

基于灰色神经网络技术的陶瓷电性能分析

运用灰色神经网络理论，研究了掺杂SrTiO3多功能陶瓷氧化热处理过程中，氧化热处理条件对介电性能和压敏性能的影响。根据各种参数的主行为因素的多少，运用GNNM(1，1)、GNNM(1，2)、GNNM(1，3)模型进行分析，并且建立了相应的GNNM(2，1)灰色神经网络模型。     

粉煤灰中元素种态分布的研究

采用DFJ-1型5段分级采样器，对粉煤灰中不同粒径颗粒物中常量元素和微量元素的组成和化学形态进行了分析。应用ICP-AES、ICP-MS法测定了各形态中元素的含量。计算了元素在各种形态中的分配比例。结果表明，对人体危害较大的微量元素主要富集在小于2．0μm的细颗粒上，Mn、Zn、Cu和Co主要分布在氧化态、水可溶态、碳酸盐态和有机态中，Pb和V主要分布在不溶态中。     

设置F-ved框架动力响应的数值分析

用Ansys有限元软件模拟了F-ved被动阻尼器，得到了F-ved的滞回曲线；并对设置F-ved的异型柱框架的线性地震反应进行了控制分析。为结构的隔震减震设计提供了一种实用高效的方法。     

The effect of precipitation of Mg2Al3 and of MnAl6 on texture evolution during isothermal annealing and subsequently on formability of CC AA5182 Al alloy

Continuous cast (CC) AA5182 Al alloy with the precipitation of Mg₂Al₃ and of MnAl₆ was cold rolled to 70% reduction and then isothermally annealed in a salt bath at three temperatures (316, 343, and 371 °C) for different times. Texture evolution during recrystallization was investigated. It was found that the recrystallization textures of the material with intense Mg₂Al₃ precipitation along the grain boundaries exhibited weaker Cube, Goss and R/β fiber components than those of the material with the more uniform fine MnAl₆ precipitates. The opposite was true in the cold rolled condition, i.e. the material with MnAl₆ precipitation had weaker Cube, Goss, and R/β fiber components in the cold rolled condition than the material with intense Mg₂Al₃ precipitation. Thus, recrystallization textures of material with Mg₂Al₃ precipitation were weaker than material with MnAl₆ precipitation. This is due to the fact that large Mg₂Al₃ particles favor the nucleation of randomly oriented grains. When subjected to formability tests, the material with prior Mg₂Al₃ precipitation displayed a lower anisotropy in tensile yield strength, ultimate tensile strength, elongation, and strain hardening exponent than material with prior MnAl₆ precipitation. This is in accord with the texture results which indicated that the recrystallization textures of material with an initial Mg₂Al₃ precipitation were closer to those of a perfectly random sample than those of material with an initial MnAl₆ precipitation. On the other hand, the elongation and Olsen values were lower and the surface quality after bending tests was worse for material with Mg₂Al₃ precipitation. This is due to the non-uniform distribution of Mg₂Al₃ particles which precipitated primarily along the grain boundaries and caused an earlier formation and coalescence of the microvoids around the grain boundary precipitates. The forming limit diagrams (FLD) correlated well with the tensile, Olsen and bending results.     

铜接地体技术在GIS变电站工程中的探索与实践

本文通过阐述铜接地体技术的基本原理,结合广东省江门市220kV新会变电站和广东省台山电厂220kV铜鼓升压站等GIS配电装置变电站工程实例,分析铜接地体与常规接地体的优劣与互补性,探索出一套适用于GIS变电站的铜接地体技术。     

架空导地线压接头施工的质量控制

架空导地线压接头施工质量的关键是质量特性往往不易检测,或不能经济地检测,如果达不到规定的要求, 对工程质量的影响来是致命的。要保证压接头的施工质量,必须采取科学的质量控制方法。     

板坯连铸中间包钢液洁净度的水力学模拟和应用

为改善太钢 10 4 0mm× 16 0mm连铸不锈钢板坯质量 ,通过水力学模拟研究了中间包内钢液的流动 ,并用直径 0 .5～ 1.0mm ,密度 0 .99mg/mm3 的聚苯乙烯塑料粒子模拟钢中直径 5 0～ 10 0 μm夹杂物的排除情况 ,确定了在中间包内设置挡渣墙和坝流控制方案 ,并进行 4 0 9不锈钢 10 4 0mm× 16 0mm连铸板的工业试验 ,结果表明 :中间包设置挡渣墙和坝后 ,铸坯夹杂物总量比中间包无控流装置生产的铸坯降低 6 6 %。     

构建"电子政府"面临的安全威胁及解决方案

本文分析了构建电子政府过程中面临的安全威胁,并提出了相应的解决方案。