Effects of surfactant/silica and silica/cerium ratios on the characteristics of mesoporous Ce-MCM-41

Using the surfactant CTMABr (cetyltrimethyl ammonium bromide) and cerium(IV) sulfate, mesoporous Ce-MCM-41 molecular sieves were produced under a hydrothermal condition with various surfactant/silica (surfactant/Si) and silica/cerium (Si/Ce) ratios. Changes to the structural traits caused by changing the molar ratios of both surfactant/Si and Si/Ce were investigated. XRD (X-ray diffraction), FT-IR (fourier transform infrared spectroscopy), and SEM (scanning electro microscopy) were used for the characterization of prepared mesoporous samples. Among the tested molar ratios, surfactant/Si ratio of 0.5 and 0.2 showed highest values of d_1 0 0 and intensity, respectively, for the Si-MCM-41. XRD analysis also identified a quintessential hexagonal structure of Ce-MCM-41 for the Si/Ce molar ratio higher than 40 (maintaining the surfactant/Si ratio at 0.2). When cerium content was increased to have the Si/Ce molar ratio of 20, the hexagonal structure of Ce-MCM-41 was collapsed due to the structural stress of substituted cerium. FT-IR results confirmed calcination of Ce-MCM-41 and the incorporation of Ce⁴⁺ ions of cerium sulfate into the silica surface with proper removal of the surfactant. Rod-like shape with rounded edges of the prepared Ce-MCM-41 samples was identified by SEM. These results suggest surfactant/Si ratio of 0.2 and Si/Ce ratio of 40 for the production of Ce-MCM-41 with the highest level of crystallinity.     

Prediction and quality control of the melt index during production of high-density polyethylene

In polyolefin processes the melt index (MI) is the most important control variable indicating product quality. Because of the difficulty in the on-line measurement of MI, a lot of MI estimation and correlation methods have been proposed. In this work a new dynamic MI estimation scheme is developed based on system identification techniques. The empirical MI estimation equation proposed in the present study is derived from the 1 ^st -order dynamic models. Effectiveness of the present estimation scheme was illustrated by numerical simulations based on plant operation data including grade change operations in high density polyethylene (HDPE) processes. From the comparisons with other estimation methods it was found that the proposed estimation scheme showed better performance in MI predictions. The virtual sensor model developed based on the estimation scheme was combined with the virtual on-line analyzer (VOA) to give a quality control system to be implemented in the actual HDPE plant. From the application of the present control system, significant reduction of transition time and the amount of off-spec during grade changes was achieved     

Online and Offline Rotary Regression Analysis of Torque Estimator for Switched Reluctance Motor Drives

A new torque estimator for switched reluctance motor (SRM) drives based on 2-D rotary regression analysis is presented in this paper. The proposed torque estimator is composed of a bicubic regressive polynomial as a function of rotor position and input current. The regressive coefficients can be computed offline or online from the torque characteristics acquired either experimentally or from numerical computation. Furthermore, a torque estimation method by taking mutual coupling into consideration is proposed. It can be seen that the estimated and experimentally obtained self-coupling and mutual-coupling torque characteristics are in good agreement with each other. In addition, the dynamic torque waveforms with and without the mutual coupling, estimated by the proposed estimator, are found to be virtually the same as those obtained from the bicubic spline interpolation for SRM drives with single-pulse voltage, hysteresis current chopping, as well as with voltage pulse width modulation control. The success of all the case studies being reported is a good validation of the usefulness and accuracy of the proposed real-time torque estimator that, as described in this paper, can be used to quickly estimate the instantaneous output torque of SRM drives.     

Complementary effects of solid lubricants in the automotive brake lining

An experimental investigation was carried out to examine the tribological behavior of NAO (non-asbestos organic) type brake linings containing different volume ratios of graphite and antimony trisulfide (Sb₂S₃). A scale dynamometer was used for friction tests and particular emphases were given to the effect of applied pressure, sliding speed, and temperature on the coefficient of friction according to the relative amounts of the two solid lubricants. Results showed that the brake linings with both solid lubricants exhibited better friction stability and less speed sensitivity than the friction materials containing a single solid lubricant. In particular, the brake lining containing higher concentrations of graphite showed better fade resistance than others during high-temperature friction test.     

Isolation of a genetic locus associated with metronidazole resistance in Helicobacter pylori

We examined the molecular mechanism of metronidazole resistance by constructing a lambda-Zap II phagemid expression library with genomic DNA from a metronidazole-resistance strain of Helicobacter pylori. Twenty-two clones were found to have elevated MTZ resistances in XLOLR strain of E. coli. Phagemids belonging to the twenty two clones were extracted and then retransformed into the XLOLR strain of E. coli. After MTZ selection, five clones could confer metronidazole resistance consistently. According to Southern hybridization and DNA sequencing, the five clones contained a same locus, recA. In addition, transforming the five clones into BL21 strain of E. coli produced a higher resistance to MTZ. Interestingly, electroporation of one of the five phagemid clones into two MTZ sensitive H. pylori yielded MTZ resistant strains. Comparing amino acid sequence in MTZ resistant with sensitive isolates revealed two point mutations at this locus. Above results suggest that mutation in recA may be associated with metronidazole resistance of H. pylori.     

Cluster analysis in industrial market segmentation through artificial neural network

Market segmentation has commonly applied cluster analysis. This study intends to make the comparison of conventional two-stage method with proposed two-stage method through the simulated data. The proposed two-stage method is the combination of self-organizing feature maps and K-means method. The simulation results show that the proposed scheme is better than the conventional two-stage method based on the rate of misclassification.     

Buffering packetised data: an examination of the crossover effect

Buffer analysis has traditionally relied heavily on the use of traffic models with short range (exponentially decaying) autocorrelation, e.g. Poisson and Markov modulated Poisson processes. Recent literature has suggested the presence of traffic with slowly (hyperbolically) decaying autocorrelation functions; these sources collectively and individually seem to be exhibiting the phenomenon of long range dependence (LRD). Furthermore, it has been claimed that this sort of traffic may exhibit behaviour, when buffered, that is advantageous in that a smaller buffer may be required than would be the case with non-LRD traffic. This phenomenon has been named the crossover effect, and the authors quantify its relevance to ATM networking, using simulation studies of a homogenous mix of chaotic sources. These show that there is a crossover effect, but the key finding is that this effect is much nearer to a buffer length of zero than was predicted by previous theoretical studies, actually occurring at a value so low that it has no practical significance     

Ovarian mucinous cystadenocarcinoma with mural nodules of anaplastic carcinoma: report of a case and review of the literature

A decline of cytosol protein kinase C activity was observed in rat myocardial cells at 4 and 8 h after endotoxin administration, and membrane-associated protein kinase C activity rose at the same time. The activity of membrane protein kinase C in aortic smooth muscle cells at 0.5 and 4 h after endotoxin injection was higher than that in control, while cytosol protein kinase C activity was lower. The results indicate that protein kinase C was activated in myocardial cells and aortic smooth muscle cells during various phases of endotoxemia.     

Flows in rectangular microchannels driven by capillary force and gravity

Capillary phenomena was studied and discussed by the scholars about 200 years ago, but the progress was slow due to the limited equipment and manufacture precision of the microchannel. In recent years, because of the rapid development of MEMS and micromachining, many applications of the capillary flow is widely developing in some modern processes, such as underfilling of flip chip, flow in microfluidic chip or biochip, and a variety of other fields.