提速列车作用下上承式钢板梁受迫振动实验研究

本文通过对京哈线下行大清河桥第9孔33.6m上承式钢板梁桥的现场实验结果的分析，以测试孔跨中实测横、竖向振幅为依据，较为详尽地研究了在提速列车作用下桥梁的自身的动力特性及其在提速列车作用下的动力响应，给出了在不同列车运行速度、不同列车编组情况下桥梁横、竖向振幅以及一阶受迫振动频率的变化关系，并对桥梁在列车通过时的桥梁的振动形态、结构的薄弱点及其加固方向进行了初步的探讨。     

变异函数在进间砂体预测中的应用

应用变异函数探讨了砂体的定量预测问题。通过对北二东密井网试验区不同类型砂体，不同井网密和岩厚度的预测，检验了此方法的精度（为70％左右），在原方法的基础上，通过对预报精度的分析并结合精度地质研究进一步完善了该方法，提出二次建模法并应用于北二东西块聚驱井的砂岩厚度预测中，预测精度可提高5％以上，从而说明应用变异函数研究砂体的定量预测问题具有可借鉴性，可以为今后新井调整厚度的预测及砂体描述提供依据。     

无线局域网采用的补偿码键控调制方式

采用补偿码健控（CCK）可以使IEEE802．11b无线局域网系统实现多速率通信，这是补偿码第一次用于调制。介绍了无线局域网的直接序列扩频（DSSS）的各种模式，着重介绍了无线局域网所采用的CCK调制方式，并对CCK调制的性能进行了理论上的分析。     

Simulation and design methodology for a 50-Gb/s multiplexer/demultiplexer package

A 50 Gb/s package for SiGe BiCMOS 4:1 multiplexer and 1:4 demultiplexer targeting SONET OC-768 serial communication systems is introduced in this work. The package was designed to facilitate bit-error-rate tests and constructed with high-speed coaxial connectors, transmission lines on ceramic substrate, ribbon bonds for chip-to-package interconnects, and a metal composite housing. Numerical simulations were conducted to guide the package design, and both small signal measurements and operational tests were performed thereafter to verify the design and modeling concepts. To keep the model structure under the existing computing capability, the simulation was segmented into three sections - coaxial connector to transmission line, transmission line alone, and transmission line to ribbon bond, and then the results were assembled to predict the performance of the entire package. The package was operated up to 50 Gb/s with low degradation to input digital waveforms and free of error.     

基于小波滤波的空中运动目标测量

本文研究了在空中运动目标跟踪中,基于小波变换的滤波方法.并运用仿真分析方法,比较了Kalman滤波与小波滤波的滤波效果,对仿真结果进行了讨论.     

微重力落塔电磁悬吊、释放技术研究

论述了微重力落塔电磁悬吊、释放、提升机构的关键技术,电磁释放过程的特性分析以及微重力落塔实际试验的情况。分析说明:悬吊、释放性能的好坏决定了试验落舱的微重力水平,也是微重力落塔试验能否成功的关键技术。     

偶联剂处理硅灰石填充不饱和聚酯树脂的研究

对针状硅灰石 (L∶D≥ 10∶32 5目 )提纯后 ,采用偶联剂进行表面处理 ,将硅灰石按不同比例填充于不饱和聚酯树脂体系中 ,研究了材料的性能。结果表明 ,改性后的硅灰石可显著改善不饱和聚酯的性能。     

用记录型信号量解决读者-写者问题

讨论了用记录型信号量解决读者-写者问题的算法,并对算法作了进一步改进.     

紫外激光诱导胃癌组织自体荧光的研究

本文测量了紫外激光（３０８ｎｍ）激发诱导正常组织和胃癌组织３１５ｎｍ－６００ｎｍ波段的自体荧光，发现胃癌组织在此荧光光谱不同于正常组织的荧光光谱。根据两者４的区别，可以把胃癌组织从正常组织中区分出来，这为诊断胃癌提供了一个新的思路。     

A numerical investigation on the geometry dependence of the crack growth resistance in CT specimens

The influence of the specimen thickness B and the ligament length b on the J _R -curves is numerically investigated for CT specimens. The thickness effect is taken into account with 2-D analyses by dividing a plain sided specimen into a plane stress part and a plane strain part. The fracture process is controlled by experimentally determined critical values of the crack tip opening displacement for crack growth initiation (CTOD_i) and the crack tip opening angle for stable crack growth (CTOA_C). It is shown that for the global behaviour of a plain sided specimen, the B/b ratio is essential. The difference between the geometry dependence of the initiation value of the J-integral and the geometry dependence of the slope of the J _R -curves is also shown.