地热资源在供热空调开发利用中的研究现状和进展

本文首先回顾了国内外地热资源在供热空调方面的应用历程及研究现状,重点介绍了当前地热供暖空调的新技术。其次,就目前系统开发设计中遇到的问题提出并分析了应采取的措施,为地热资源的合理利用提供了依据。     

基于UCOSⅡ的恒温槽自动检测仪设计实现

基于STM32F103开发平台进行实时嵌入式操作系统μc-OS Ⅱ的移植,并使之实现恒温槽不同位置温度采集、LCD显示、打印等的多任务处理。系统通过基于双通道24位高精度模数转换芯片AD7793的传感装置对温度数据进行采集,传感器位置根据系统对步进电机的控制而改变。系统可以采集恒温槽数据,同时在LCD上显示采集数据,进行数据计算处理并得到恒温槽的性能指数,且可通过打印机输出所有测量和计算的结果。     

烟火药剂中硫磺含量测定方法的研究

确定了烟火药剂中硫磺含量的测定方法,将烟火药剂洗去有机粘合剂后,用稀盐酸充分溶解、过滤,用浓硝酸将硫磺氧化成硫酸,加入过量的钡离子,然后用EDTA容量法测定过量的钡离子,进而得到硫磺含量.试验表明,本文提出的方法回收率在98.22%～99.79%.     

First-principles study of multiple-site substitutions of alloying elements in Ni-based single crystal superalloys

The development of Ni-based single crystal superalloys relies heavily on the composition design with the addition of critical alloying elements,e.g.,Re and Ru.Understanding the role of alloying effects require to know the configurations of the alloying element distribution betweenγ-Ni andγ′-Ni_3Al phases and among various non-equivalent sites.This work employed firstprinciples density functional theory calculations to study the preference of phase and site occupancy of 11 alloying elements including Al and transition metal elements:3d (Ti,Cr,Co,Ni),4d (Mo,Ru),and 5d (Hf,Ta,W,Re) in Ni and Ni_3Al.We calculated the substitution energies of 1298 triple-site doping configurations including 286 Ni Ni Ni site doping of Ni,726 Al Ni Ni site doping,and 286 Ni Ni Ni site doping of Ni_3Al with alloying elements Ni,Co,Ru,Cr,Re,Mo,W,Al,Ti,Ta,and Hf.In the dual-site and triple-site doping of Ni and Ni_3Al,all studied alloying elements preferred to occupy Ni phase rather than Ni_3Al phase.We found that the most stable defect complexes often contained the favorable substitutions of Al,Ti,Ta,and Hf for the Ni sites that stabilized the alloying elements doping at the other one or two nearest neighbor sites.The co-substitutions of various alloying elements at multiple sites are critical to understanding the strengthening mechanism of alloying elements in Ni-based single crystal superalloys.     

基于JSP+Servlet+JavaBean的网上拍卖系统设计与实现

随着Internet技术的发展和互联网的日益普及以及电子商务的发展,电子商务活动日益繁荣,C2C模式的巨大优势将使它成为未来电子商务领域重要的一部分。网上拍卖迅速成为一种非常活跃的C2C电子商务模式。详细介绍了JSP+Servlet+JavaBean的三层架构模式在电子商务平台上应用的相关技术。该系统经实践证明是稳定、安全和高效的,具有较高的实用价值。     

Conceptual models for fracturing in fault related folds

Fault related folds and fractures, which always improve reservoirs and trap capacity, especially in the oil and gas fields in western China, are of extreme importance for oil and gas exploration. Based on four assumptions and fault related fold theory, we propose four conceptual models for fracturing in fault related folds, i.e., a simple-step parallel fault bend anticline, a simple-step parallel fault propagation anticline, a multiple-bend fault-bend fold and a break-forward imbricate. Fracture conditions depend on structural evolution and specific site conditions. A case study of the Kulongshan Anticline in the Jiuquan Basin shows that our conceptual models match reality data very well.     

炭纤维表面BN涂层的制备及其介电性能

采用化学转化法在炭纤维表面制备BN涂层。首先将炭纤维浸渍硼酸和尿素的混合溶液,然后在N2气氛和不同温度下(700、800、900和1 000℃)热处理2 h。利用X射线衍射(XRD)、扫描电镜(SEM)、红外光谱仪(IR)和X射线光电子能谱(XPS)对BN涂层的物相、形貌和成分进行分析,研究热处理温度对BN涂层结构的影响,以及涂层对炭纤维介电性能的影响。结果表明:浸涂了硼酸和尿素溶液的炭纤维在N2气氛下于800℃热处理2h,可制得较为均匀的BN涂层;随着浸涂-热处理次数增加,涂层质量得到改善,浸涂-热处理3次后炭纤维表面涂层均匀连续,涂层厚度约390 nm,且无剥落或开裂现象;但浸涂-热处理次数超过3次后,涂层出现剥落和开裂现象,涂层质量变差;3次浸涂-热处理后的炭纤维介电常数实部ε’为26.54~9.15,虚部ε为35.8~31.7,与未处理炭纤维(ε’=31.6~6.3,ε=55.6~40.6)相比,ε下降,ε’升高。     

新型镶嵌式催化剂挤条成型装置的研制

介绍一种新型镶嵌式组合结构催化剂挤条成型装置。新型镶嵌式催化剂挤条成型装置的模架为不锈钢材料,镶嵌模块采用工程塑料,模块更换方便,催化剂挤出顺畅,能满足石化行业催化剂挤条生产中耐温、耐压、耐腐蚀以及规模化生产的要求。与不锈钢整体结构挤条模板相比,新型镶嵌式催化剂成型装置不仅成本降低较大,而且制作周期缩短。     

中海壳牌公司在检修工作中的HSE管理

介绍壳牌公司在HSE管理上所做的工作、管理水平、对承包商的要求及认识到清洗公司今后在清洗施工及HSE管理上要努力的方向。