有粘结预应力在252m地下室顶板中的应用

在总长度 2 5 2m的超长不设缝地下室顶板中 ,采用了预应力、设置后浇带等综合抗裂技术 ,并对有粘结预应力平板的设计理论、施工工艺、锚固体系及超长结构预应力损失控制和抗裂控制作了深入研究。     

Ionothermal synthesis of a three-dimensional zinc phosphate with DFT topology using unstable deep-eutectic solvent as template-delivery agent

A three-dimensional zinc phosphate compound with DFT topology, designated as ZnPO₄-EU1, has been synthesized by an ionothermal approach from the system HF-ZnO–P₂O₅-choline chloride-imidazolidone. Ethylenediamine, derived from decomposition of the imidazolidone component of the deep-eutectic solvent (DES) itself, is delivered to the synthesis and serves as an appropriate template for ZnPO₄-EU1. Experiments in which the synthesis conditions were varied showed that ZnPO₄-EU1 may be prepared over a wide molar ratio of P/Zn = 0.55–13.0. Powder X-ray diffraction patterns have been obtained at intervals to track the crystallization process of this material. The experimental data show that Zn₃(PO₄)₂ · 4H₂O (a dense phase) was first isolated from the DES after reaction for 1 h. Subsequently, the pure phase of ZnPO₄-EU1 was obtained with increasing crystallization time from 12 h to 72 h. The experimental results show that the nucleation and crystallization take place with relatively low levels of solvent degradation, demonstrating that zinc phosphate with a three-dimensional framework can be synthesized by in situ generation of an appropriate template using an unstable DES at high temperatures (150–200 °C).     

Passively Q -switched Ytterbium-Doped Double-Clad Fiber Laser With a Cr4+:YAG Saturable Absorber

A high-power and high-repetition-rate passively Q -switched ytterbium-doped single-mode double-clad fiber laser was built using a Cr⁴⁺:YAG saturable absorber (SA). Two different SAs with initial transmissions of T_omicron = 30% and T_omicron = 50% were studied. At the maximum coupled pump power of 9.8 W, an output power of 4.7 W, pulse duration of 143 ns, pulse repetition rate of 253 KHz, pulse energy of 18.5 muJ, and slope efficiency of 49% were obtained with the T_omicron = 30% SA.     

解吸塔换热器706C结堵的原因分析及其对环保装置正常运行的影响

本文详细分析了解吸塔换热器结堵的原因和对环保装置正常运行的影响,并针对性地提出了防范和处理措施。     

"What is in a word? No versus Yes differentially engage the lateral orbitofrontal cortex": Correction.

Reports an error in "What is in a word? No versus Yes differentially engage the lateral orbitofrontal cortex" by Nelly Alia-Klein, Rita Z. Goldstein, Dardo Tomasi, Lei Zhang, Stephanie Fagin-Jones, Frank Telang, Gene-Jack Wang, Joanna S. Fowler and Nora D. Volkow (Emotion, 2007[Aug], Vol 7[3], 649-659). The supplemental materials link should appear as follows: http://dx.doi.org/10.1037/1528-3542.7.3.649.supp. (The following abstract of the original article appeared in record 2007-11660-018.) The words "No" and "Yes" are involved in conditioning to prohibit or encourage behavior, respectively. The authors, therefore, hypothesized that these words would be attributed to endogenous valence, activating neuronal circuits involved with valence and emotional control. Functional MRI (fMRI) at 4 Tesla was used to record regional brain activity while participants were exposed to emphatic vocalizations of the words. Results showed that No and Yes were associated with opposite brain-behavior responses; while No was negatively valenced, produced slower response times, and evoked a negative signal in the right lateral orbitofrontal cortex (OFC), Yes was positively valenced, produced faster response times, and evoked a positive signal in a contiguous region of the OFC. Attribution of negative valence to No and trait anger control were associated with increased responsivity of the OFC to No. Inasmuch as sensitivity to the prohibitive command No develops during childhood through interaction with primary caregivers as the first social objects, our findings may implicate the lateral OFC in the neurobiology of emotion regulation and subsequent social development. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

新型刮刀钻头的设计及现场试验研究

在理论分析的基础上，综合PDC钻头和刮刀钻头的优点，设计了一种新型的刮刀钻头，并进行了现场试验。现场试验结果表明，该钻头运转平稳，采用低钻压、高转速，钻进速度快，井眼规则通畅，有较明显的防斜作用，该种钻头的推广应用对提高钻井工程的整体效益具有十分重要的意义。     

铣制三元流叶轮时产生误差的原因分析及解决方法

对在五坐标数控加工中心上铣制三元流叶轮时出现的叶轮附面尺寸误差问题，进行了详细分析，并提出了问题的解决方法，有效地避免了加工中产生的超差。     

GJB712A-2001航天用GH4169高温合金锻制圆饼规范介绍

介绍了GH 4 16 9高温合金锻制圆饼规范的修订内容 ,对其主要技术指标作了简要说明 ,并与国外同类标准进行了比较。     

带材位置自动对中系统的工作原理及应用

本文详细介绍了金属带材轧机带材位置自动对中系统的工作原理、电路组成及调试方法。